InfiniteRule Lock for Gen-Right Off-Road and DV8 Off-Road Tire Carrier - Stainless Steel

Video Transcript for Review 2 of InfiniteRule Spare Tire Locks - Universal Application Lock - 34061069-D

Today, we're going to take a look at the InfiniteRule stainless Steel Lock for the Gen-Right Off-Road and the DV8 Off-Road Tire Carrier. Now this is a flush-style lock, which will secure your Gen-Right Off-Road or DV8 Off-Road Tire Carrier to your vehicle. It's a heavy duty stainless steel construction. You can see in the head here, it has the grooves in. It makes it very easy to grab. On the inside when you remove the head, there was an actual O-ring down the inside, which protects the internal components from any dirt and grime.

And if you notice attached to the end, they have this rubber weather resistant tethered dust cap, which will help keep water and debris out of the key way of the lock. Two keys are included. This part is made in the USA. Again, the application is for the Gen-Right Off-Road or the DV8 Off-Road Tire Carrier.The sheer strength on this lock is 15,000 pounds. Pin diameter is 17/32.

A few dimensions on this. The overall length is going to be right at 5 3/4 inches long. And the inside pin length or span is 3 1/8 inches.Just to show you how this would open. You take your key, insert it in there, and you just unscrew it like you're unscrewing a bolt. And once you get it far enough, the head will come right off.

And there's your two pieces. This will go through what you're going to lock it too. And then once you get it through the holes, you put your head on there. And then just tighten that key like you're tightening a bolt again. And once you get it tightened down all the way, just snug it up.

And then I just back it off a little bit. Pull the key out. Put the cap on. And it's locked in place. And you're all secure.But that should do it for the review on the InfiniteRule Stainless Steel Lock for the Gen-Right Off-Road and DV8 Off-Road Tire Carrier.