SnowBear Plow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall
Item # SB324-080
Retail:$2,207.58
Our Price: $2,149.80
You Save: $57.78
Confirmed to Fit
2021 Ram 3500
2 Wheel Drive
4 Wheel Drive
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (7)
- Q & A (0)
- Photos
2021 Ram 3500 - SnowBear Plow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall
- Vehicle Snowplow
- Fits 2 Inch Receiver
- Wireless Remote and In-Cab Switch
- SnowBear
- Adjustable Blade - 3 Angles
- Steel Blade
- Steel Cutting Edge
Remove snow quickly from your driveway or parking lot with this residential, hitch-mounted snowplow. Pivoting, 3-position blade glides over uneven ground. Remote-controlled electric winch lets you raise and lower plow from your warm cab.
Features:
- Hitch-mounted plow lets you clear parking lots and driveways with your vehicle
- Plow sits close enough to vehicle to reduce leverage and strain on plow, mounts, and vehicle
- Electric winch allows you to easily raise and lower plow
- In-cab toggle switch lets you raise and lower the plow from the comfort of your vehicle
- Includes a wireless remote control as an alternative to the toggle switch
- Adjustable, 3-position blade can be manually angled left, right, and straight ahead
- Manual release handle is easily accessible from front or back of plow
- Sturdy steel edge scrapes over a variety of solid surfaces - not for gravel or sand
- Skid shoes let you adjust plow height to prevent blade from digging into the ground
- Strong rubber deflector allows for better visibility by directing snow away from your windshield
- Red visibility markers help you see plow edges so you can steer away from obstacles
- Rugged and durable, all-steel construction
- Black powder coat finish provides corrosion resistance
- Simple installation
- Slides into your vehicle's 2" front trailer hitch receiver (sold separately)
- ISO certification ensures consistent, quality manufacturing
- Assembly required
Specs:
- Application: 2" x 2" front trailer hitch receiver
- Blade dimensions: 82" wide x 19" tall
- Height adjustment: 9"
- 3 Blade angles:<>
- Left 22 degrees
- Straight ahead
- Right 22 degrees
- Winch lift capacity: 3,000 lbs
- Weight: 315 lbs
- 1-Year limited warranty
Notes:
- Due to the size of this item it ships via truck freight.
- Bottom of 2" receiver tube must be 13" from the ground.
This Generation III Classic Personal snowplow is the most recent innovation from SnowBear. This plow conveniently slides into your vehicle's front-mounted trailer hitch (sold separately) for easy, convenient mounting. It has a remote-controlled electric winch that will let you raise and lower the plow without leaving the warmth and comfort of your cab. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain. Angled trip springs are also built in to help keep the blade from catching and tripping.
Simple, Hitch-Mounted Installation
This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. Unlike a plow that attaches to custom-fit brackets, which ties you down to just 1 vehicle, this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.
To install the Personal snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver (sold separately) . Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.
How to Plow
Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead or 22 degrees to the left or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or private roadway where piling the snow straight ahead would create a barrier.
To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote or the in-cab toggle switch, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the Personal snowplow.
When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.
Easy Lifting with Electric Winch
The electric winch on this plow allows you to easily lift and lower the blade using a toggle switch that mounts in your cab. You can also use the included wireless remote control. The winch uses a durable nylon strap, which is much quieter than a chain, to raise and lower the plow.
324-080 Snow Bear Gen 3 Classic Personal Snow Plow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall
Installation Details
Customer Reviews
SnowBear Plow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall - SB324-080
Average Customer Rating: 4.1 out of 5 stars (7 Customer Reviews)
Remove snow quickly from your driveway or parking lot with this residential, hitch-mounted snowplow. Pivoting, 3-position blade glides over uneven ground. Remote-controlled electric winch lets you raise and lower plow from your warm cab.by: Mike07/25/2023
This little plow has been perfect for a Jeep Wrangler. I used it all winter and it kept the driveway clear, no complaints.
by: John12/20/2023
It would have been nice if the gentleman who sold me my snow plow would have told me that I needed a drop down hitch instead of a straight hitch, which makes a big difference when trying to plow.
by: Bill11/17/2023
The plow works ok. It's easy enough to get on and off the vehicle. Fatal flaw is the winch strap. I have replaced 3 times in one winter of plowing. If you purchase this product be sure to order extra winch straps!
by: Michael 12/30/2023
Works well for the price.
by: Jennifer 01/20/2021
Honda Ridgeline
I love this plow. It works great for our long driveway. This was easy to assemble and easy to take on and off our Honda Ridgeline.
by: Timothy02/27/2020
etrailer has been a great!!! They have been updating me on all the shipments.
by: Antonio02/22/2023
7
7
See what our Experts say about this SnowBear Snow Plow
- Snow Plow Recommendation for a 2002 Jeep WranglerActually SnowBear does not list a max height range for their snow plows like the part # SB324-080. Since you have a 2 inch front hitch installed on your 2002 Jeep Wrangler it should work well for you. I attached a review video for this plow for you to check out as well.
view full answer... - Parts Needed to Mount Snow Plow to 2010 Ram 3500The personal snowplows from SnowBear simply mount to a hitch receiver so to add one to your 2010 Ram 3500 you'll need the Curt # C31065. If you have the Winter Wolf edition that requires vehicle-specific mounting brackets then we'll either need to find you a different setup or you'll have to have a shop fabricate some mounts as SnowBear doesn't have any custom mounts for a 3500 Ram pickup. For the personal snowplow from SnowBear you'll need that Curt Front Hitch # C31065 and SnowBear...
view full answer... - Front Hitch Plow Recommendation for 2004 Jeep Cherokee with 2 inch HitchFor your 2004 Jeep Cherokee that has a 2 inch front hitch installed the SnowBear Personal SnowPlow part # SB324-080 would be a great option. This plow is 82 inches wide which is a good size for your vehicle and comes with everything needed to allow you to control it from inside the cab of your vehicle.
view full answer... - Snow Plow Compatible with 2003 Jeep Grand Cherokee LaredoThere is not a bracket kit that fits a Laredo model. You will need to use the Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" # C31048 and then use either 82x19 inch snowplow # SB324-080 or # SB324-081 for 84x22 inch snowplow.
view full answer... - Snow Plows and Mount Options for a 2017 GMC Sierra 1500I do have plow options for you but I spoke with my contact over at Snow Bear and they have not yet confirmed a custom snow plow mount kit for the 2017 GMC Sierra 1500 (March 1, 2017). What you can do is use a plow that attaches to a front mount trailer, # C31069, which does fit your truck. With the front mount hitch installed you could then use Snow Bear plow # SB324-172, # SB324-081, # SB324-080, # SB324-168, or # SB324-140.
view full answer... - Front Hitch Recommendation for 2020 Ford F-150The front hitch I recommend for your 2020 Ford F-150 is the Curt part # C31083 as it has plenty of weight capacity and installs easily. Also, Curt front hitches are the ones our snow plow manufacturers recommend and test with so we know they are very solid when used with plows like the SnowBear # SB324-080.
view full answer... - Snow Plow for 1993 Jeep Wrangler with 18 inch Front Hitch HeightThe SnowBear personal snow plow part # SB324-080 would be a great option for the 2 inch front hitch you have installed on your 1993 Jeep Wrangler. It would work well with your 18 inch hitch height as well since this hitch does not have a hitch height range requirement. It uses an electric winch and in-cab controls to allow you control it easily.
view full answer... - Front Hitch Recommendation for 2020 Jeep Wrangler for Use with Snow PlowCurt is the front hitch manufacturer that our snow plow manufacturers recommend with their kits so for your 2020 Jeep Wrangler you'd want the Curt # C31086 and you'd be set. This would work great with a hitch mounted plow setup like the # SB324-080.
view full answer... - Recommended Snow Plow For A 1994 Jeep WranglerI can definitely point you in the right direction. If you are looking for a hitch mount plow we have the # SB324-080 from SnowBear. This is a 82" x 19" steel blade plow that has 9" of height adjustment. It uses an in-cab switch and also comes with a wireless remote control. Please note that the bottom of your receiver tube must be at least 13" from the ground in order to use this plow. We also offer the Detail K2 elite series plows for your 1994 Wrangler. I recommend the # K2RAMP8219ELT...
view full answer... - Installation Recommednations for SnowBear Snow Plow on 2014 GMC SierraA trusted mechanic should be able to handle the installation for you. According to Curt, installation of their # C31012 front receiver should take around 45 minutes to an hour for an experienced installer. Once the receiver is installed, the plow will require assembly and electrical connections to the vehicle battery, and wiring the remote which should take a few hours. Any qualified mechanic should be able to complete the installation in around 3 or 4 hours. I've linked you to the installation...
view full answer... - Plow Recommendation for 2008 Jeep Liberty with Curt Hitch C31020 InstalledThe Curt Front Hitch part # C31020 would be an excellent choice for your 2008 Jeep Liberty so that you can do some snow plowing. For a compatible snow plow that would do a great job and would be very easy to use I would recommend the Snowbear # SB324-080. This plow is super easy to use as it can be totally controlled from the interior of your vehicle. The blade is 82 inches wide and 19 inches tall which is a great size for your application.
view full answer... - Recommended Snowplow for a 2020 Jeep WranglerIt sounds like you're looking for a snowplow setup for a 2020 Jeep Wrangler and if that's the case we have some great options. I recommend the SnowBear Personal Snowplow part # SB324-080 with Curt Front Mount Trailer Hitch Receiver part # C31086. The SnowBear plow has an 82" wide blade with electric winch that allows you to control it from inside the vehicle. The 2" hitch mount will make it easier to get the plow on and off the vehicle. We do not carry ACI plows unfortunately.
view full answer... - Front Hitch Recommendation for a 2002 Dodge Dakota 4x4For your 2002 Dodge Dakota 4x4 I recommend installing the Curt Front Mount Hitch, # 31080. This has the highest vertical pull rating of our front mount hitches and it does not require any bumper modifications. The receiver will sit just below the front bumper fascia. I have attached the installation instructions for you to check out. Once you have the front hitch installed, a plow like the SnowBear # SB324-080, will fit in the 2 inch receiver.
view full answer... - Is Curt Hitch C31064 Same as FHK31064 For 2013 Honda Pilot for Snow PlowYes, the Curt hitch part # C31064 that you referenced is the same as the FHK31064 that you mentioned from Meyer Plow. Curt front hitches are the most commonly recommended by plow companies and it's very common they'll slightly change the part numbers or rebrand them as their own which is what's going on in your case. With this hitch installed on your 2013 Honda Pilot you could use the Snowbear Plow part # SB324-080 which is 82 inches wide, 19 inches tall, and is easily controllable wirelessly...
view full answer... - Snow Plow for a 2005 Honda PilotWe have a plow for your 2005 Honda Pilot, but the Winter Wolf will not work. The 2005 Pilot is only compatible with front-mounted hitches. To use a plow on the Pilot, you will need the Snow Plow Personal, part # SB324-080, and the hitch for your vehicle, part # 33328. This particular plow is 82" wide and 19" tall.
view full answer... - Replacement Spring for SnowBear 324-080 Snow PlotI have a solution for you, but the tension springs for a SnowBear Personal Snowplow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall # SB324-080 are not sold individually. However, the Replacement Spring Kit for SnowBear Snowplows # SB600-128 comes with 2 springs and the hardware needed to repair the plow, so you would be able to replace your lost spring and still have an extra spring on hand in the event of a future loss or break. We do also have some other parts available for this...
view full answer... - Front Hitch for 2018 Jeep JL Wrangler Unlimited with No-Drill InstallationFor your 2018 Jeep JL Wrangler Unlimited the front-mount 2-inch hitch I recommend is the Draw-Tite # 65079. Installation requires no drilling and all hardware is included. We have not had a chance to make an installation video for this item on your specific vehicle but the written instructions are linked for you. Minor fascia trimming and skid shield removal will be required. With this 2-inch hitch installed you will easily have the weight capacity for using accessories such as a hitch-mount...
view full answer... - Snow Plow For 2003 Ford RangerWe do have snow plow setups for your 2003 Ford Ranger like with the SnowBear Personal Plow # SB324-080 which installs in a front hitch like the Curt # C31063 which is a confirmed fit for your truck.
view full answer... - Which Front Hitch Fits 1998 Jeep Wrangler for Use with Snow PlowSince your goal is to push a plow with a front hitch for our 1998 Jeep Wrangler you'd want the hitch part # C31028 instead as the Draw Tite # 65048 puts the hitch opening too high for a plow like the SnowBear part # SB324-080 to be used. In the install instructions there's no mention of needing to remove tow hooks so you wouldn't need to remove them.
view full answer... - Is Bumper Modification Required to Install a Front Mount Hitch on a 2003 Dodge DurangoWe have front mount trailer hitches available for the 2003 Dodge Durango as long as it is a 4WD model. At this time there are no front mount hitches available for the 2WD models. If you have a 4WD model, then I recommend installing the Curt Front Mount Hitch, # 31080. This has the highest vertical pull rating of our front mount hitches and it does not require any bumper modifications. The receiver will sit just below the front bumper fascia. I have attached the installation instructions...
view full answer... - Recommended Front Trailer Hitch for 2015 Toyota Tacoma 4WD for Snow PlowFor your 2015 Toyota Tacoma 4WD, I recommend the SnowBear Personal Snowplow for 2" Hitches # SB324-080 for the easiest install. You are correct that the Draw-Tite Front Mount Hitch # 65070 will allow you to retain the skid shield and will work well for your truck and this plow.
view full answer... - Recommended Snow Plow and Front Hitch for a 2024 Chevy Silverado Yes, you can so long as your 2024 Chevy Silverado 1500 has a front hitch like the Curt item # C22NR. The SnowBear Plow for 2" Hitches item # SB324-080 mounts inside a 2" front hitch receiver. The SnowBear item # SB324-080 is a 82" x 19" steel blade plow that has 9" of height adjustment. It uses an in-cab switch and also comes with a wireless remote control.
view full answer... - Front Mounted Receiver Hitch For 2018 Ford F150I'd be happy to help you with that! I'd recommend the Draw-Tite front mounted receiver, part # 65067 which would work well for carrying a bike rack. Front mounted receivers are also handy for moving trailers around in tight quarters and are ideal as a mount for a light-duty personal snow plow like # SB324-080. If you click the provided links, you can see the installation instruction and video.
view full answer... - Correct Replacement Winch for SnowBear Personal Snowplow for 2" Hitches - 82" Wide x 19" TallThe correct replacement winch for the SnowBear Personal Snowplow for 2" Hitches - 82" Wide x 19" Tall part # SB324-080 is the Replacement Single Speed Electric Winch part # SB263-282. There is not individual replacement parts for the winch unfortunately.
view full answer...
Do you have a question about this Snow Plow?
Info for this part was:
Expert Research:
Jameson C
Updated by:
Wilson B
Updated by:
Sabrina W
Written by:
Amanda M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brooke M.
7/28/2023
How cool is that?! Thanks for sharing the awesome photo!