Custom Fit Roof Rack Kit With Y00243 | Y05042 | Y05045 | Y53TR
(62 reviews)
Price: $1,337.75
Custom Fit Roof Rack Kit With Y00243 | Y05042 | Y05045 | Y53TR
Item # Y79PB
Our Price: $1,337.75
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
- All Info
- Reviews (62)
- Q & A (0)
- Videos (17)
- Photos
Yakima Roof Rack - Y79PB
- Requires Fit Kit
- Platform Rack
- Yakima
- 60L x 54W Inch
Designed for use in the Australian Outback, this rugged platform lets you bring whatever gear you might need for your next adventure. Compatible with many Yakima off-road and traditional roof rack accessories.
Features:
Yakima LockNLoad Platform B, 60x54:- Rugged platform lets you build a large aftermarket roof rack that's perfect for off-road use
- Pair with Yakima towers and SL adapters (sold separately) to create a complete roof rack
- Use adapters (sold separately) to mount directly to roof rack crossbars
- Large, flat surface accommodates more diverse loads than traditional crossbars or roof baskets
- Perfect for road trips, camping, and overlanding - a great fit for any outdoor lifestyle
- Horizontal slats accommodate clamp-on accessories like bike racks, kayak carriers, or a roof top tent
- Integrated channels accommodate various off-road accessories (sold separately)
- Compatible with perimeter rails, off-road lights, jack holders, spare tire carriers, jerry can holders, and more
- Built-in wind deflector reduces wind noise and drag
- Rugged construction designed for off-road use and tested in the Australian Outback
- Aluminum frame with black powder coat is durable and rustproof
- Assembly required
Yakima Landing Pad 17 (Set of 4):
- Provide mounting points for Yakima SkyLine or Control towers (sold separately)
- Pads install in the fixed mounting points inside your vehicle's flush, factory side rails
- Protect your vehicle from scratches with UV-resistant, rubber base pads
- Include snap-on covers for protection when towers are not in place
Yakima LockNLoad SL Adapter, 2-pack:
- Heavy-duty adapters let you mount a LockNLoad platform directly to Yakima SkyLine, TimberLine or TrackTower towers
- Requires 1 set of adapters for each pair of towers in your application
- Works with all platform sizes
- Structural steel construction with black powder coat is durable and rustproof
- Simple bolt-on installation with included hardware
- Secure the adapters directly to towers and then attach to platform mounting points
Yakima SkyLine Towers (4-pack) (w/new covers):
- 4 Heavy-duty towers mount Yakima crossbars to your vehicle with fixed mounting points, flush side rails, or tracks
- Pair with 2 Yakima crossbars and Landing Pads (sold separately) to create a complete roof rack
- Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
- Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
- Also fit RoundBar crossbars with adapter (Y03536 - sold separately)
- Easy, tool-free installation - just drop tower onto Landing Pad and close the cover
- Included torque tool clicks 3 times when crossbar is tightened to tower - eliminates fear of under- or over-tightening
- Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
- Weather-resistant die-cast aluminum, stainless steel, glass-reinforced plastic, and elastomer construction
8000243 Landing Pad 17 for Yakima SkyLine and Control Towers - Qty 4
8005042 LockNLoad SL Adapters for Yakima SkyLine, TimberLine and TrackTower Towers - Qty 2
8005045 Yakima LockNLoad Heavy-Duty Roof Rack Platform - Size B - Aluminum - 60" Long x 54" Wide
8000163 Yakima Timber Line Roof Rack Towers for CoreBar, JetStream, and RoundBar Cross Bars - Raised Side Rails - Qty 2
Replaces 8000148
Video of Custom Fit Roof Rack Kit With Y00243 | Y05042 | Y05045 | Y53TR
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Yakima Crossbars SkyLine Towers Review
Hey everyone, it's Evangeline here at etrailer and today we'll be taking a look at our Yakima SkyLine towers. These are designed for your fixed mounting points, your flush rails, or your track systems. So if the roof of your vehicle looks like this, you probably need these. If you wanna carry around roof mounted accessories like kayaks or ladders or maybe you need to bring a Christmas tree home, you first need a roof rack system. Now this is gonna be the Yakima SkyLine towers for those vehicles that specifically require a custom fit kit for their fixed mounting points. Now if your vehicle does not look like this you might have a naked roof or raised rails.
That's why it's very important before anything to use our fit guide here at etrailer.com. Put your year, make model and then find the right fit for you. And if this is one of them let's take a look at how it works. Etrailer.com also helps you get the full kit for your vehicle because the skyline towers don't work alone you also need the appropriate crossbars as well as the correct fit kit or landing pads for you. But with this, you get a low profile roof rack so it doesn't stick too high up.
You get a heavy duty weight capacity since this is an aluminum roof rack. So usually they have 165 pounds capacity, depends on the vehicle, and you have this very sturdy but also very custom fit kit for your vehicle. That way, no matter what you put on it within reason and wherever you go, you know it's gonna stay there. But my favorite feature about this roof rack is the door design. So you pinch on the door to open it and that's it.
Just like that, you can lift the whole roof rack off of your roof. When you need to install it, you just pop it right back on. So the height of the tower is about 3 1/2" from your fixed mounting point to the top of the tower. The actual height can change depending on what crossbars you have and what rails you have, but compared to a lot of the other flush mounted crossbars and roof racks, it's just very low to the roof. Now with this style of a rack though, you are limited to the fixed mounting points or the flush rails of your vehicle.
So wherever they are, that's how much crossbar spread you get. For example, ours is set to 28" apart. On the other hand, if you have an aggressive tilt to your roof, you can actually adjust this up to six degrees forward or six degrees backward to help even out the playing field. Now I like to leave my roof rack on my vehicle and Yakima is pretty known for its durability. So the SkyLine towers are made of glass reinforced plastic, aluminum, stainless steel and elastomer. So all that is combined to help them stay strong even if you leave them on all day, all year. But if you do need to take off your roof rack you also have a feature to make it more low profile. Start by flipping both doors open and then you can lift the roof rack up and off of your roof. This way you can store it inside of your garage or in your house. You can leave your base on your roof rails. All you need to do is cover them with the included cover and that's it. You're done. The covered bases sit about 2" high up off of your fixed mounting point and makes for a much more low profile look. Your towers will have everything you need to install them which really is just one tool. And your fit kit has the hardware needed to undo the factory mounting points on your vehicle or for your track system if that's what you have. Now, that install process is extremely simple. Let's take a look at it. So these are what your towers look like when they are not on your roof. So they come all assembled in the box. All you need to do is get the appropriate landing pads for your vehicle. These landing pads can look different depending on your car and that's why it's very important to use our fit guide to get the right fit for you. You have four towers as well as the torque tool. And depending on your crossbars, you will also get a separate adapter to be used with those specific bars. With your landing pad kits, you'll get a part that fits your specific vehicle. You will get the hardware needed to install that part and you will have the base as well as the base cover. So if the towers are not on your vehicle you could just cover that base pad and take the cover off to install the tower. Here's an example of how the landing pad can be used depending on your cars. So you have a factory mounting point in this specific flush rail. So the pad goes over that hole and then you're gonna get your base which goes on top of that pad. And then you have a bolt with split washer and flat washer which is used to tighten down those two pieces to your car. The torque tool for your towers comes in handy whenever you're tightening down those bolts because it has a setting for tension. Once you get enough tension, it automatically clicks and prevents you from over tightening. Now to set up your tower for your crossbars there's different adaptor pieces. We're using the one for the JetStream crossbars. So we start by pushing in this plate into the tower. So you are gonna hear some clicks and that's how you know it's secure. Now we're gonna open up the tower door. So this involves pinching the door and pulling. Be careful because if you slide your fingers forward it doesn't feel as good. But with the door open, you can then loosen this bolt up front. It says to do it eight times. I just go until the bolt underneath is visible so you can see underneath what I mean. Notice how you have this little bolt head hiding around. You're gonna try to get at it with the tool. You can see how I do have access. That means as we flip this tower back over I can put this plate up top and then I can tighten down and thread onto that plate. With adapter and plate, this can now slide into your crossbar. For other adapters, they're designed to slide over or around your crossbar. With this specific style, I do recommend for the initial slide making sure that this is loose, but after that even if you have it fully tightened down you'll still be able to slowly adjust it on the crossbar. So with the towers on you're then ready to put this onto your roof. Now what I do is I just kind of roughly measure how far apart our landing pads are and that's when I can measure on the towers the distance apart they roughly need to be, in my case, 43 1/2. You could be off by 1/2" or so 'cause you can still move them. Also, supposedly this is when you put the rubber pieces inside of your crossbars. I do that after I've already installed them onto the roof. I take them back off and then I push them in so that I know exactly where the towers will be sitting. Make sure your towers are torqued down at their bottom bolt. Do that for both sides before installing. This is a lot easier with a friend on the other side but still doable with one person. So leave those doors open so that you can gently place them onto your roof. The bottom bracket with the door open fits onto your base so see how that just pushes into place. And then to secure it, just push that door close and you've got a sturdy fit. If you're using Yakima same key system lock cores, this is a time to switch them out on your towers. But other than that, just double check that all the towers are strong and secure and everything is sturdy. And that's it for the install of your roof rack. That right there was a look at the Yakima SkyLine towers for your Yakima crossbars for when you have vehicles that have fixed mounting points, flush rails or track systems.
Customer Reviews
Custom Fit Roof Rack Kit With Y00243 | Y05042 | Y05045 | Y53TR - Y79PB
Average Customer Rating: 4.9 out of 5 stars (62 Customer Reviews)
Designed for use in the Australian Outback, this rugged platform lets you bring whatever gear you might need for your next adventure. Compatible with many Yakima off-road and traditional roof rack accessories.by: Eric 05/13/2024
Fit our Subaru Forester perfectly. Install was a breeze. For the money I wish they came with the core locks.
by: John11/16/2023
Very nice quality towers. Very heavy duty! They have a cool "snap" on / off mechanism for quick removal and installation.
by: William02/28/2024
You guys provide great products and excellent customer service.
Thanks
by: Layne 02/11/2024
These crossbars were easy to install and adjust. Be sure to get all the pieces you need. There is no mention of the Landing Pads necessary to use these.
by: Dan 11/06/2023
Great company. Fast delivery.
by: Jon12/16/2022
Lots of wind noise. Good rack overall
by: Philip 05/29/2023
These really look so much better then the factory racks! Easy to install. Easy to order! Great product!
by: Phi06/29/2020
2018 Ford F-150
Mounted to the top of my 2018 F-150 Super Crew Cab. Had Yakima Baselines, with HD Bars, HD Bar Adapters and the locknload crossbar adapters. Wished I was able to install it without crossbars as it requires that I buy them, also adds a bit of height to the the locknload as well.
Very well built, had my wife (125lbs) walking around on it after I mounted the locknload. Took about an hour to assemble the locknload and maybe another hour or two of adjusting the bars to where I wanted the locknload to sit on the roof. Other than it looks a bit too high I do love them. Will probably see what I can do about lowering the locknload in the future.
by: Dylan 05/20/2023
It was exactly what I ordered
by: Michael01/22/2023
Yakima SkyLine Towers are well-designed and well-executed. They easily fit into the Yakima Landing Pads and form a tight fit when closed. And they also fit nicely into the Yakima JetStream Crossbars when following the Yakima instruction manual and various YouTube videos. I did run into a snag at first where I found the rubber seal on one SkyLine Tower getting caught on the JetStream Crossbar track, but after that I was careful not to let that happen with the other towers.
I find the appearance of the Yakima SkyLine Towers to match their level of quality in materials and design.
by: RC01/05/2023
They were more helpful than Yakima identifying the correct part, arrived a day early. Nothing to complain about, great service.
by: Michael09/04/2021
2008 GMC Yukon XL
I am going to include the Landing Pads, Skyline Towers, LockNLoad adapters, and Pivoting Mounts that are all required for my vehicle in this review of the 84" x 54" LockNLoad Platform. First, I had done months of research trying to figure out what would work and meet my needs for a 2008 GMC Yukon XL. Without the help of etrailer's agent, Ashley, I'd probably still be trying to figure things out! Ashley was patient and thorough, she made sure I had all the parts I needed for a fairly complex (and large!)project. I cannot thank her enough!
On to the assembly and installation: Ashley confirmed that following instructions was key to efficient building - I found that combining online instructions with the included hard copies worked best. As an example, the online fastener images and descriptions are far better than the paper ones. Then, having the paper instructions in hand made "in the moment" progress much faster. All of the Yakima parts fit together perfectly, and by methodically following the instructions (I cannot stress this enough!), including pre assembling Landing Pads, Towers, and Pivoting Mounts, there was no need to backtrack. Once I had a day to devote to the project, everything went very smoothly. Placing the large Platform on the mounts does require two people, but the rest was easy for one fairly handy person to accomplish. Making adjustments to be sure the Platform is centered and square to the roof took some time but it's worth it in the end. Again, thanks to etrailer and particularly Ashley! It was a pleasure doing business with you!
by: Michael09/04/2021
Toyota 4Runner
This thing added a great deal of flexibility to my 4Runner. Rock solid and almost limitless options for roof storage allowed me to customize it to transport a kayak and roof box that would never have been possible otherwise.
by: Gustav05/23/2021
Easy Install.
But, the instructions tell you torque bolts to 48 in lbf or 5.4 Nm, with the L shape security wrench.
How do you apply a specific torque to a L shaped wrench?
Can't put a torque wrench on it.
My question and reason for 4 stars is for Yakima. Why not supply a preset torque driver like the one supplied for the Skyline Tower installation?
Overall I'm quite pleased.
by: Mike 05/20/2020
Great product... love that fact that I can take the bars on and off without having to disassemble the system. Very convenient when not its not being used.
by: Peter 09/19/2022
They fit perfectly and we’re easy to in stall
by: Robert 01/06/2022
2017 Chevrolet Tahoe
Installed very easy on a 2017 Chevy Tahoe and the hardest part was pulling the existing plugs. These seat very nicely into the flush mounts and have a good secure and weather tight fit.
by: William02/28/2024
by: Brett 02/10/2024
by: Matt07/17/2023
by: Keith 04/26/2023
Love it.
by: Peter 10/28/2023
by: Dave 05/06/2024
by: Eugene01/29/2021
2017 Chevrolet Tahoe
Fast delivery. Yakima roof system for my 2017 Tahoe was perfect.
by: Jed 04/26/2024
25
342
Show More Reviews
See what our Experts say about this Yakima Roof Rack
- Will Yakima RoadShower Work With Yakima LockNLoadYes, the Yakima RoadShower Portable Solar Shower part # Y29VR will work with the Yakima LockNLoad Platform Roof Trays like part # Y05045. I confirmed this with Yakima as well. There are no extra parts needed.
view full answer... - Is There a Platform Rack For a 2019 Ford Expedition That Mounts To Side RailsIf you want to use a platform rack and mount it directly to the side rails on a 2019 Ford Expedition (Includes Max) then I do have an option for this in the Yakima LockNLoad Platform Roof Tray Kit part # Y05045, part # Y05042-2, and part # Y33TR. The Yakima LockNLoad has integrated channels which allows you to use channel mounted accessories and it uses horizontal cross sections which allows you to use accessories that clamp on as well like a rooftop tent.
view full answer... - Can Yakima LockNLoad Platform For 2017 Toyota Highlander XLE be Used with Roof TentThe Yakima LockNLoad Platform part # Y05045, # Y53TR, # Y05042-2, and # Y00242 would work great for your tent setup. This will give you a 165 lb dynamic weight capacity which is the standard capacity needed for tents which would use a static capacity instead and would be much higher. This is a creative solution to give you the additional spread you'd need for your tent too!
view full answer... - Can Yakima LockNLoad Platform Roof Tray Y05045 Be Installed On 2017 Toyota Tacoma W/ OEM Roof RackWhen the OEM roof rack on your 2017 Toyota Tacoma is in the stowed position the crossbars are removed and put inline with the rails on the side, so when in this position the Yakima LockNLoad Platform Roof Tray - Aluminum - 60" Long x 54" Wide # Y05045 or any other roof mounted accessories cannot be used. With that said you would still have the same 100lb load limit. Instead the crossbars will need to be opened up for the # Y05045 to be installed, and you will need to use the Crossbar Clamps...
view full answer... - Does Yakima Frontloader Bike Rack Y02103 Fit The Yakima LockNLoad Platform Tray Y05045?The Yakima FrontLoader Wheel Mount Bike Carrier - Roof Mount # Y02103 you currently have is indeed compatible with the Yakima LockNLoad Platform Roof Tray - Aluminum - 60" Long x 54" Wide # Y05045 you were looking at without the need for any adapters. I included videos of the products mentioned for you to take a look at.
view full answer... - Platform Roof Rack that Fits 2022 Ford Bronco with Raised RailsWhile Rhino Rack doesn't have a Pioneer Platform Yakima has a very similar option with their LocknLoad Platform that is a fit for your 2022 Ford Bronco. For that you'd need the Timberline feet part # Y00147, LockNLoad platform # Y05045, and SL adapter # Y05042 (quantity 2). This will give you a 60 inch by 54 inch platform that is very similar to the Pioneer Platform.
view full answer... - Correct Yakima LockNLoad Platform Roof Tray for a 2012 Toyota 4RunnerIn order to use the Yakima LockNLoad Platform Roof Tray part # Y05045 which is the recommended size on a 2012 Toyota 4Runner you will need the LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers part # Y05042-2 and the TimberLine Towers for Yakima Crossbars part # Y33TR.
view full answer... - How To Install Yakima LockNLoad Over Truck Bed with Tonneau CoverIn order to install the Yakima LockNLoad Platform Roof Tray above a tonneau cover on a truck bed you will need to install a set of tracks alongside the bed rails along with a crossbar system. The crossbar system is needed because the tray is not wide enough to reach just the mounting feet on the tracks. I have attached the needed parts below: Yakima JetStream Crossbars part # Y00427 Yakima Tracks for Roof Racks part # Y01135 Landing Pad Yakima Control Towers part # Y00221 (2) SkyLine Towers...
view full answer... - Platform Tray that Fits Roof of 2018 Chevy TahoeFor your 2018 Chevy Tahoe we have the Yakima platform tray kit part # Y05045, # Y00148, # Y05042-2, and # Y00243 as a confirmed fit.
view full answer... - Roof Platform Tray that Fits 2015 Chevy TahoeI have a way to install a roof platform tray similar to a Rhino Rack Pioneer Platform but Rhino Rack does not have a fit for your 2015 Chevy Tahoe. Instead you'd need to go with a Yakima LockNLoad with the part # Y05045, # Y53TR, # Y05042-2, # Y00243 which gives you a 60 inch by 54 inch platform confirmed as a fit.
view full answer... - Parts Needed to Install Yakima LockNLoad Platform B on 2013 Ford F-150 SuperCrewTo install the Yakima LockNLoad platform # Y05045 on the roof of a vehicle you'll need the SL adapters # Y05042-2, the towers # Y28TR, and the base clips part # Y06168 and you'd have everything needed to install on your 2013 Ford F-150.
view full answer... - Recommended Platform Rack System without Crossbars for 2019 Toyota Highlander XLEFor a low profile platform style rack similar to a Rhino Rack Backbone System, the only available option is the Yakima Roof Rack and Platform System that uses parts # Y05045, # Y53TR, # Y05042-2, # Y00242. This kit combines the Yakima Lock N Load Platform # Y05045 and Yakima Skyline towers # Y53TR to give you the platform without a crossbar for the low profile setup you're looking for. The additional parts are for the footpack and adapters to allow you to mount the towers to your 2019...
view full answer... - Largest Yakima LockNLoad Platform That Fits 2 Roof Rack CrossbarsI checked with Yakima and the largest LockNLoad Platform Tray that will work with a roof rack system with two crossbars is the 60" Long x 54" Wide Yakima LockNLoad Platform Roof Tray # Y05045. To mount this tray to your BMW you will need the Crossbar Clamps for Yakima LockNLoad Platform # Y05039. The 84" Long x 49" Wide LockNLoad Platform # Y05047 does require at least three crossbars to mount. Using less than that would make it unstable, and not only void the warranty, but potentially...
view full answer...
- Does Yakima LockNLoad Platform Fit Rhino-Rack Vortex Aero CrossbarsThanks for the photo, and yes, the LockNLoad will indeed fit to Rhino-Rack Vortex aero crossbars like your Rhino-Rack Vortex Crossbars for Retrax XR # RRVA180B-RRRLT600. You'll just need adapters to mount the platform, and here are the part numbers: - Yakima LockNLoad Platform Roof Tray # Y05045 - Crossbar Clamps for Yakima LockNLoad Platform Rack # Y05039 I also wanted to note that the clamps come in a 2-pack, and you will need a total of 4 clamps, so order two of the # Y05039.
view full answer...
- Will The Rhino-Rack Cable Core Lockdown Fit A Yakima LockNLoad Platform? Yes, the Rhino-Rack Cable Core Lockdown # RR43207 will also work with your Yakima LockNLoad Platform Roof Tray # Y05045.
view full answer... - 2019 Mercedes-Benz Metris Yakima LockNLoad Platform Rack Installation PartsTo mount a Yakima LockNLoad Platform Rack on your 2019 Mercedes-Benz Metris with a naked roof we first need a roof rack system with crossbars as Yakima doesn't have a direct fit for the LockNLoad as of right now (February 2022). For a roof rack I recommend the Thule WingBar Evo system: 60" WingBar Evo Crossbars - # TH711520 Rapid Podium Feet - # TH460R Fit Kit - # THKIT3029 Lock Kit - # TH450400 (optional) Then you can use the 60" Long x 54" Wide LockNLoad # Y05045 with 2 sets of the...
view full answer... - Can You Use a Larger Yakima LockNLoad Platform Roof Tray on a 2023 Ford Expedition Than the 60"x54"You are correct that the 2023 Ford Expedition Platform Roof Rack by Yakima will fit the raised side rails on your Expedition. The 2023 Ford Expedition Platform Roof Rack by Yakima consist of: - Yakima LockNLoad Platform Roof Tray # Y05045 - TimberLine Towers for Yakima Crossbars # Y33TR - LockNLoad SL Adapter for Yakima # Y05042-2 I have an alternate option, but you would not be able to use the Yakima LockNLoad Platform Roof Tray # Y05048 (84" Long x 54" Wide) on your 2023 Ford Expedition....
view full answer... - Recommended Platform Rack for a 2021 Subaru Ascent I did a little digging around and it looks like the roof on your 2021 Suabru Ascent is around 63 inches, making the Yakima LockNLoad Platform Roof Tray # Y05045 with the TimberLine Towers for Yakima Crossbars # Y33TR, and the LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers # Y05042-2 near perfect. This platform rack measures 60" long, 54" wide, and will be a perfect addition to your Subaru for all your camping and luggage needs. This rack also has top channels so you can...
view full answer... - How to Use the Yakima LockNLoad Platform Roof Tray On a Camper ShellIn order to mount the Yakima LockNLoad Platform Roof Tray part # Y05045 on a truck bed camper shell I recommend using the Yakima HardTop SL Roof Rack part # Y01618 because it's a complete all around system that has everything that you need. It comes with adjustable tracks to accommodate many different roof rack accessories and aero crossbars for the best wind resistance. It's also low profile at around 4-6" tall. Unfortunately, there isn't any sort of Rhino-Rack Backbone Mounting System...
view full answer... - Roof Basket That Mounts to Factory Raised Side Raids of 2019 Jeep RenegadeThere is one! It is called the Surco Safari Rack 5.0 for Raised Factory Rails # SPS5060-1101. It's size 60" x 50" which is the size Surco recommended for your 2019 Jeep Renegade. This system is a complete basket with sides and comes with adapters that clamp straight to your factory roof rails. I attached a video below with our review and explanation of the basket. It is similar to the very popular Yakima LockNLoad Platform Rack # Y05045. The LockNLoad platform though still needs separate...
view full answer... - Platform Rack for 2021 Honda Pilot With Flush-Mounted RailsThere is one option for a platform rack that will fit your 2021 Honda Pilot with flush-mounted rails, and give you the off-road look and capability you want. And it will not interfere with your sunroof either, so long as the sunroof retracts into your roof as opposed to jutting upwards. The rack that fits your '21 Pilot is from Yakima and is made up of the following: - Yakima LockNLoad Platform Roof Tray # Y05045 - SkyLine Towers # Y53TR - LockNLoad SL Adapter # Y05042-2 - Landing Pad...
view full answer... - How to Mount a Platform Rack to the Roof of a 2019 Mercedes-Benz Sprinter 2500There is a possible solution for you, but there aren't any Yakima or Rhino-Rack platform racks that can fit your 2019 Mercedes-Benz Sprinter 2500 without having a crossbar system. For your crossbars, I recommend the Rhino-Rack Vortex Aero Crossbars, part # RRVA180B-2. They are aero-style crossbars that are better at reducing wind noise and drag than other styles. I've linked to a video review of these crossbars below. To mount these crossbars, you will need the Quick Mount Legs, part...
view full answer... - What is the Recommended LockNLoack Platform for My 2022 Subaru Outback Wilderness?For your 2022 Subaru Outback Wilderness, Yakima recommends the Yakima LockNLoad Platform Roof Tray - Aluminum - 60" Long x 54" Wide # Y05045. Since your vehicle has raised factory rails, you will need to purchase the TimberLine Towers # Y33TR along with the LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers # Y05042-2 to attach directly to the rails.
view full answer... - Lowest Profile Roof Tray that Fits 2023 Subaru Ascent with Raised RailsYakima has a platform tray that fits the raised side rails of your 2023 Subaru Ascent with the Yakima LockNLoad # Y05045,# Y33TR, # Y05042-2 which will by far be your lowest profile option since a set of crossbars isn't required and it's a platform and not a basket so it is not very tall at all. The tray is 60" Long x 54" Wide.
view full answer... - Which Yakima Landing Pads for 2021 Toyota Highlander to Mount Skyline TowersTo use the Yakima Skyline Towers # Y53TR on your 2021 Toyota Highlander the correct landing pads are the Landing Pad 28 for Skyline and Control Towers # Y66VR.
view full answer... - Roof Rack Recommendation for 2020 Honda PilotThe rack you need will depend on how the roof of your 2020 Pilot is fitted out. I really like the Yakima JetStream roof rack, because of how well they're built and designed. They may not be the least expensive option, but they work very well and are extremely durable which makes them the most popular choice for your vehicle. If you have a bare roof, you'll need the following parts: • Yakima 60 inch JetStream crossbars, part # Y00426 • Yakima BaseLine roof rack towers, part # Y28TR •...
view full answer... - Recommended Roof Rack For A 2023 Toyota RAV4 With A Thule Hullavator Hi Cathy, To ensure that you can get the extra extension to mount the Thule Hullavator # TH898 you'll want to go with a Yakima roof rack system. Yakima crossbars run their mounting track the entire length of the crossbar so you can go with ones that are longer than your typical length without worrying if the mounting feet will be able to connect. You'll want the following components: Yakima JetStream Crossbars - Black - 60" Long # Y00426 or silver # Y00429 SkyLine Towers for Yakima Crossbars...
view full answer... - How to Determine if Two Malone SeaWing Kayak Carriers Fit 2019 Subaru Outback Factory Roof RackYour kayaks will fit the Malone SeaWing Kayak Carrier with Tie-Downs # MPG107MD, but two of them will not fit your 2019 Subaru Outback's factory roof rack because the crossbars simply are not long enough for both the carriers and your 30" wide kayaks. So to use a kayak carrier you'll need an aftermarket roof rack, and the verified fit to replace the roof rack on your 2019 Outback is from Yakima, and consists of the following part numbers: - Yakima JetStream Crossbars - Silver # Y00428...
view full answer... - What Roof Rack Can I Use with the Thule Hullavator on My 2022 Toyota Highlander with Flush Rails?I have a great solution for your flush rails on your 2022 Toyota Highlander to use the Hullavator # TH898. Yakima temporarily discontinued the Y00148 because they are updating the feet to fit a wider range of vehicles. Yakima has been changing a lot of fitments lately because of this factor. The landing pads # Y66VR are separate from the Y00148. However, with that being said, Yakima does have a roof rack system that fits your flush rails with a different model of feet. For that system,...
view full answer... - Best Roof Rack for 2020 Kia Soul with Fixed Mounting PointsThe best roof rack for your 2020 Kia Soul with a naked roof (fixed mounting points) is from Yakima because it will give your Kia a roof rack that combines effectiveness and style while minimizing any wind noise that can occur with lesser roof racks. This roof rack is made up of: - Yakima JetStream Crossbars # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 22 # Y00248 - Same Key System Lock Cores (Optional) # Y07204 This roof rack will look stellar atop your 2020 Kia...
view full answer... - Yakima Roof Rack for 2022 Subaru LegacyYou are on point with Yakima being a really high-quality product so I completely understand wanting to stick with them for a roof rack on your 2022 Subaru Legacy. The Yakima roof rack that fits your Legacy consists of the following parts: - Yakima JetStream Crossbars # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 22 for Yakima Towers # Y00248 - Same Key System Lock Cores (Optional) # Y07204 I have added links to video reviews for you to check out as well.
view full answer... - Recommended Roof Rack for Mounting a Thule Hullavator Pro on a 2021 Toyota RAV4The Thule Hullavator Pro, part # TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails. With those two stipulations in mind, the Thule WingBar Evos don't look like they will provide enough clearance with their 47" of crossbar length. Instead, I recommend the Yakima HD Crossbars, part # Y01156. They are 55" long, so they will have the extension you...
view full answer... - Yakima Roof Rack Parts Needed for a 2017 Subaru Outback WagonYes, the recommended Yakima Landing pad for the 2017 Subaru Outback is the Landing Pad 15 part # Y00241 that you referenced. For crossbars you would want the part # Y00408, for towers part # Y53TR and adapters part # Y03536. All of these components would complete a roof rack for your vehicle.
view full answer... - 2010 Outback Roof Rack OptionsAdding feet to your 2010 Subaru Outback Wagon will not change the weight limit of the rack. The maximum weight limit will still be 165lbs. Adding the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 51" Long - Qty 2, part # RRRTS551, does not change that. In fact, adding an extra feet/legs and crossbars to your roof rack will actually lower the weight you can carry on your roof. That is because your roof rack's weight actually counts toward the 165lb weight total. I would use my existing...
view full answer... - Roof Rack that Can Fit 2023 Jeep Wrangler Rubicon with Sky One Touch RoofThe Yakima Jetstream roof rack part numbers # Y00428, # Y53TR, # Y00226 is a fit for your 2023 Jeep Wrangler Rubicon that has the sky one touch roof and would do a great job to carry a tent and other cargo.
view full answer... - Roof Rack & Attachments For 2010 Toyota Tacoma TRD SR5I would get the Yakima HD Bar Roof Rack System. You'll need the HD bars # Y01156 Skyline Towers # Y53TR HD bar adapter # Y03541 and landing pad # Y74FR. You can then use the JayLow Kayak Carrier # Y04073, Off-Grid Cargo Basket # Y07139 or Skybox Cargo Box # Y95AV. These are just my suggestions for accessories but there is much much more on our website if you're wanting something different!
view full answer... - Will the Rhino-Rack # Y01-130B Fit My 2022 Hyundai Santa Cruz?Yes, you will be able to put 2 bikes on the Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells - Track Mount # Y01-130B if the combined weight of the racks and bikes is exactly 220 pounds (or under). As far as the fitment of the # Y01-130B on your 2022 Hyundai Santa Cruz, that is a bit more complicated. The tracks will fit with the included hardware with drilling. With the 63" tracks, you can cut the tracks to the size of the bed rails. The complicated part is the crossbar fitment....
view full answer... - Can Yakima LockNLoad Platform For 2017 Toyota Highlander XLE be Used with Roof TentThe Yakima LockNLoad Platform part # Y05045, # Y53TR, # Y05042-2, and # Y00242 would work great for your tent setup. This will give you a 165 lb dynamic weight capacity which is the standard capacity needed for tents which would use a static capacity instead and would be much higher. This is a creative solution to give you the additional spread you'd need for your tent too!
view full answer... - Best Roof Rack for a 2015 Mazda 3 5-door with Fixed Mounting PointsFor the 2015 Mazda 3, you'll only have access to either Yakima or Rhino Rack roof bars. Both are great companies and there's a few differences that are important to note about the two companies. Rhino Rack doesn't produce as many accessories, but is a smaller than average bar and fits more mounting hardware in both its C-Channel and around the bar. Additionally, its locking system is two part, one for the foot pack and one for the c-channel accessories as a separate part. Finally, Rhino...
view full answer... - Parts To Use Existing Yakima Aero bars With RetraxONE For Toyota TacomaIt is possible to use your Yakima Aero bars on the RetraxONE part # RTT-60851 for the 2017 Toyota Tacoma. You need 2 sets of landing pads part # Y00221 to slide into the tracks of the Retrax system. You need one set (quantity of 4) of Yakima Skyline Towers part # Y53TR to attach to the landing pads. Then the Aero bars mount to the towers.
view full answer... - Roof Rack Recommendation for Rhino Rack Sunseeker II Awning on 2017 Ram ProMaster CitySince the Sunseeker II Awning Item # RR32105 only fits Rhino-Rack Heavy-Duty, Aero and Sportz crossbars; Thule and Inno square crossbars; Yakima round crossbars we have a solution, but it's not the Rola rack you mentioned. You'd want the Yakima Round Bar Rack part numbers # Y00408, # Y53TR, # Y03536, and # Y00233 which would fit and work well on your vehicle and with the Sunseeker. You will also need the adapter part # RR32105 too with the round bars.
view full answer... - How to Install Rhino-Rack Pioneer Platform Rack on a 2003 Hummer H2To install a platform rack on your 2003 Hummer H2 we first need a roof rack and for that I recommend the Yakima JetStream system that includes the following parts: - 60" JetStream Crossbars # Y00426 - SkyLine Towers # Y53TR - Landing Pad 4 # Y00224 This installs directly to the fixed mounting points on your Hummer which then allows you to use the Rhino-Rack Pioneer Platform Tray # RR82TB along with 2 of the Mounting Kit # RR43105 to get it installed. The Pioneer Platform # RR85ZW...
view full answer... - Recommended Roof Rack for 2024 Toyota RAV4For an extremely quiet roof rack that fits your 2024 Toyota RAV4 with flush mounted rails I recommend the Yakima JetStream roof rack. You will need the following: -Yakima JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 -SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems # Y53TR -Landing Pad 23 for Yakima SkyLine and Control Towers # Y98FR The JetStream bars use an asymmetrical design along with WindRidges to reduce drag, noise, and...
view full answer... - Recommend Roof Rack for a Bike and Kayak on a 2018 Honda CR-VIn order to add a roof rack to your 2018 Honda CR-V I recommend using the Yakima Roof Rack made of parts # Y01156, # Y53TR, # Y03541 and # Y00245. This system has heavy duty yet lightweight aluminum cross bars that are durable and rustproof. This option will also be far more cost effective than an OEM roof rack as I am sure you will come to find out. If you need a kayak carrier then I recommend the Rhino-Rack Nautic Roof Kayak Carrier part # RR570. It is side-loading and it comes with...
view full answer... - Length of Yakima Crossbars Needed to Load 2 Thule Hullavators # TH898 on a 2019 Honda PilotWhile we do technically have an option for mounting 2 Hullavators # TH898 onto your 2019 Honda Pilot with the Yakima SkyLine Towers # Y53TR and Landing Pad 19 # Y00245 on your flush rails, you would need at least 72" inches of usable crossbar space for the required 4-8 inches of length past the feet. This is because one Hullavator measures 36" long. The 70" JetStream crossbars # Y00427 does not provide enough length. With that being said, the only Yakima option we carry that has that length...
view full answer... - Can Thule Hullavator Install on Yakima CrossbarsThe Thule Hullavator Pro # TH898 can fit round bars by grabbing around the crossbar and can fit aero shaped bars if the bars have a channel on top of them. Which the Yakima aero shaped bars don't have top channels so to go the Yakima route will require round bars which includes the part numbers # Y00408, # Y53TR, # Y03536, and # Y00241 and you'd be set.
view full answer... - Is There A Trailer Hitch For 2023 Kia Soul GT Line With Center ExhaustIf you need to carry cargo with your Kia Soul, I do have a few potential solutions for you. I will tell you there is not a trailer hitch available anywhere that will fit the center exhaust model at this time (August 2023). The receiver would go exactly where the exhaust sits and there is no way to work around that. If your goal was to carry a few bikes we could set you up with a trunk mount bike rack like the Malone hanger # MPG2139. This can carry 3 bikes weighing up to 33 lbs apiece...
view full answer... - Recommended Roof Rack for Hullavator and Kayak Carrier on 2019 Honda PilotThank you for all of the information! While you are able to use the Hullavator # TH898 with your setup as far as weight goes, this kayak carrier does require the crossbars to stick out 4" - 8" out past the roof rack feet. Since the Thule SquareBars have a limited amount of space under them for the feet you can only use the 53" Bars # TH712400 but this wouldn't give you the required spacing for the Hullavator. I recommend using the Yakima 60" JetStream Crossbar # Y00426 instead with the...
view full answer... - Is There a Platform Rack For a 2019 Ford Expedition That Mounts To Side RailsIf you want to use a platform rack and mount it directly to the side rails on a 2019 Ford Expedition (Includes Max) then I do have an option for this in the Yakima LockNLoad Platform Roof Tray Kit part # Y05045, part # Y05042-2, and part # Y33TR. The Yakima LockNLoad has integrated channels which allows you to use channel mounted accessories and it uses horizontal cross sections which allows you to use accessories that clamp on as well like a rooftop tent.
view full answer... - Can Yakima LockNLoad Platform For 2017 Toyota Highlander XLE be Used with Roof TentThe Yakima LockNLoad Platform part # Y05045, # Y53TR, # Y05042-2, and # Y00242 would work great for your tent setup. This will give you a 165 lb dynamic weight capacity which is the standard capacity needed for tents which would use a static capacity instead and would be much higher. This is a creative solution to give you the additional spread you'd need for your tent too!
view full answer... - Can I Size Down From A LockNLoad Platform B To A LockNLoad Platform KYou should be able to use the Yakima LockNLoad Platform Roof Tray - Aluminum - 55" Long x 49" Wide, part # Y05044, on your vehicle. If your crossbars are at least 27" apart and less than 33" apart, you should not have any problems mounting the platform to your vehicle. Do keep in mind that you will need an adapter to mount this platform directly to your towers. The LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers - Qty 4, part # Y05042-2, will attach directly to your Yakima...
view full answer...
- Correct Yakima LockNLoad Platform Roof Tray for a 2012 Toyota 4RunnerIn order to use the Yakima LockNLoad Platform Roof Tray part # Y05045 which is the recommended size on a 2012 Toyota 4Runner you will need the LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers part # Y05042-2 and the TimberLine Towers for Yakima Crossbars part # Y33TR.
view full answer... - 2021 Jeep Grand Cherokee Trailhawk Platform Style Roof RackThere may be slight differences between the 2020 and 2021 Grand Cherokee, but not much. If you're wanting to get a platform on your 2021 Jeep Grand Cherokee I do have one that is confirmed to fit. All You need is to get the Yakima LockNLoad Platform # Y05044, SkyLine Towers # Y53TR, SL Adapter # Y05042-2 and these Landing Pad 18 # Y00244. This is just like the rhino rack platform. It will install similar to the rack that I put on this 2019 Cherokee so check that out!
view full answer... - Roof Platform Rack Options for a 2014 Jeep Grand CherokeeWe have a few different options for adding a platform rack to your 2014 Jeep Grand Cherokee and it all depends on how you'd like to install it. If you'd like to install the platform rack directly to the flush rails (you'll need to remove your OEM crossbars) then we have the following: Yakima LockNLoad - Parts # Y05044, # Y53TR, # Y05042-2, and # Y00244 Rhino-Rack Pioneer - # RR74AB If you'd like to install a platform rack to your OEM crossbar system then we have the following: Yakima...
view full answer... - Correct Yakima LockNLoad Platform Roof Tray For a 2016 Honda CR-V with Flush Side RailsIn order to use the Yakima LockNLoad Platform Roof Tray on a 2016 Honda CR-V with flush side rails you will need to use the following; part # Y05044, part # Y53TR, part # Y05042-2, and part # Y00245. This will be a direct mount option which mounts to factory fixed points . The tray also mounts directly to the mounting feet so there is no need for additional crossbars and adapters.
view full answer... - Platform Tray that Fits Roof of 2018 Chevy TahoeFor your 2018 Chevy Tahoe we have the Yakima platform tray kit part # Y05045, # Y00148, # Y05042-2, and # Y00243 as a confirmed fit.
view full answer... - Will the Rhino-Rack Pioneer Platform # JB0892 Fit on My 2014 Jeep Grand Cherokee with Flush Rails?I have a solution for you. As far as mounting a Pioneer platform 72" x 56" and Backbone like the # JB0892 on your black and chrome raised rails of your 2014 Jeep Grand Cherokee, I confirmed with Rhino-Rack that they do not have an engineered fit of that size of platform for your roof. Also, we do not carry a Backbone that is guaranteed to fit your roof. Regrettably, your rails will not work with the RCL Legs for Rhino-Rack Crossbars and Pioneer Platforms # RRRCL6 either. With that being...
view full answer... - Roof Platform Tray that Fits 2015 Chevy TahoeI have a way to install a roof platform tray similar to a Rhino Rack Pioneer Platform but Rhino Rack does not have a fit for your 2015 Chevy Tahoe. Instead you'd need to go with a Yakima LockNLoad with the part # Y05045, # Y53TR, # Y05042-2, # Y00243 which gives you a 60 inch by 54 inch platform confirmed as a fit.
view full answer... - Parts Needed to Install Yakima LockNLoad Platform B on 2013 Ford F-150 SuperCrewTo install the Yakima LockNLoad platform # Y05045 on the roof of a vehicle you'll need the SL adapters # Y05042-2, the towers # Y28TR, and the base clips part # Y06168 and you'd have everything needed to install on your 2013 Ford F-150.
view full answer... - Recommended Platform Rack System without Crossbars for 2019 Toyota Highlander XLEFor a low profile platform style rack similar to a Rhino Rack Backbone System, the only available option is the Yakima Roof Rack and Platform System that uses parts # Y05045, # Y53TR, # Y05042-2, # Y00242. This kit combines the Yakima Lock N Load Platform # Y05045 and Yakima Skyline towers # Y53TR to give you the platform without a crossbar for the low profile setup you're looking for. The additional parts are for the footpack and adapters to allow you to mount the towers to your 2019...
view full answer... - Platform Tray/Roof Rack that Fits 2018 Jeep Grand Cherokee TrailhawkFor your 2018 Jeep Grand Cherokee we don't have a Rhino Rack Pioneer platform that fits your roof rails directly but we have the very similar Yakima LockNLoad Platform Tray setup part numbers # Y05044, # Y53TR, # Y05042-2, and # Y00244 which does fit your rail setup directly. This tray is 55 inch by 49 inch. We can't recommend opening your roof with this installed though as it might interfere but also it's going to cause quite a bit of wind noise.
view full answer... - Can You Use a Larger Yakima LockNLoad Platform Roof Tray on a 2023 Ford Expedition Than the 60"x54"You are correct that the 2023 Ford Expedition Platform Roof Rack by Yakima will fit the raised side rails on your Expedition. The 2023 Ford Expedition Platform Roof Rack by Yakima consist of: - Yakima LockNLoad Platform Roof Tray # Y05045 - TimberLine Towers for Yakima Crossbars # Y33TR - LockNLoad SL Adapter for Yakima # Y05042-2 I have an alternate option, but you would not be able to use the Yakima LockNLoad Platform Roof Tray # Y05048 (84" Long x 54" Wide) on your 2023 Ford Expedition....
view full answer... - What is Height of LockNLoad Platform Rack for LEER Camper Topper on a 2020 Nissan FrontierTo install the LockNLoad on your 2020 Nissan Frontier 5' Bed LEER camper topper you need the following parts: - 55" Long x 49" Wide Yakima LockNLoad Platform Roof Tray # Y05044 - TrackTowers # Y52AV - LockNLoad SL Adapter # Y05042-2 The TrackTowers sit about 2" tall and the LockNLoad is around 4" tall so you'll be adding about 6" to the height of your LEER topper which is pretty standard for a track mount platform. For something a little shorter you can use the Rhino-Rack Pioneer Platform...
view full answer... - Recommended Platform Rack for a 2021 Subaru Ascent I did a little digging around and it looks like the roof on your 2021 Suabru Ascent is around 63 inches, making the Yakima LockNLoad Platform Roof Tray # Y05045 with the TimberLine Towers for Yakima Crossbars # Y33TR, and the LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers # Y05042-2 near perfect. This platform rack measures 60" long, 54" wide, and will be a perfect addition to your Subaru for all your camping and luggage needs. This rack also has top channels so you can...
view full answer... - Yakima LockNLoad that Fits 2023 Toyota RAV4Yakima actually has a LockNLoad that fits your 2023 Toyota RAV4 with the part numbers # Y05044, # Y33TR, # Y05042-2 but the Yakima platform can't fit the Backbone system.
view full answer... - Platform Rack for 2021 Honda Pilot With Flush-Mounted RailsThere is one option for a platform rack that will fit your 2021 Honda Pilot with flush-mounted rails, and give you the off-road look and capability you want. And it will not interfere with your sunroof either, so long as the sunroof retracts into your roof as opposed to jutting upwards. The rack that fits your '21 Pilot is from Yakima and is made up of the following: - Yakima LockNLoad Platform Roof Tray # Y05045 - SkyLine Towers # Y53TR - LockNLoad SL Adapter # Y05042-2 - Landing Pad...
view full answer... - What is the Recommended LockNLoack Platform for My 2022 Subaru Outback Wilderness?For your 2022 Subaru Outback Wilderness, Yakima recommends the Yakima LockNLoad Platform Roof Tray - Aluminum - 60" Long x 54" Wide # Y05045. Since your vehicle has raised factory rails, you will need to purchase the TimberLine Towers # Y33TR along with the LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers # Y05042-2 to attach directly to the rails.
view full answer... - Lowest Profile Roof Tray that Fits 2023 Subaru Ascent with Raised RailsYakima has a platform tray that fits the raised side rails of your 2023 Subaru Ascent with the Yakima LockNLoad # Y05045,# Y33TR, # Y05042-2 which will by far be your lowest profile option since a set of crossbars isn't required and it's a platform and not a basket so it is not very tall at all. The tray is 60" Long x 54" Wide.
view full answer... - Will Platform Rack Fit Raised Side Rails of 2017 Toyota Land CruiserThe Yakima LockNLoad Platform Roof Tray # Y05045 is actually designed to do exactly what you are wanting, which is mount directly to the raised side rails of your 2017 Toyota Land Cruiser without crossbars. To do so you'll also need the TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails # Y33TR and LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers # Y05042-2.
view full answer... - Rhino-Rack Pioneer Platform Rack for 2019 Ford Expedition with Factory Rails and No CrossbarsI actually had the chance to work with a 2019 Ford Expedition. While in the shop, I tested the RhinoRack roof racks we had shown to be compatible with the factory installed rails and to my surprise, the SX Series Legs # RRSX100 were not a fit. When trying to install them, I could tell they were not tall enough to catch on the rather large and triangular shape of the Expedition rails. The only style of legs or towers that will work is the kind that wraps around the entire bar, like the...
view full answer...
- Will Rhino-Rack Pioneer Platform Rack Work On a 2020 Subaru OutbackI do have an option for you but the Rhino-Rack Pioneer Platform Rack cannot be used on a 2020 Subaru Outback per Rhino Rack. That said, we do have a very similar option for you in the Yakima LockNLoad Platform Rack part # Y05044-39. That said, this will need to be mounted using the below items as it won't fit the factory crossbars. The Rhino-Rack Pioneer and Yakima LockNLoad are both very similar. SkyLine Towers for Yakima Crossbars part # Y53TR Landing Pad 27 for Yakima SkyLine And Control...
view full answer... - Can Yakima LockNLoad be Installed on 2021 Toyota 4Runner OEM Roof RackGreat question! The OEM roof rack on your 2021 Toyota 4Runner looks nice but it sits too low to your roof for the Yakima LockNLoad # Y05045-39 mounting hardware to fit. Instead of purchasing a roof rack AND the LockNLoad what I recommend doing is picking up the parts to mount the LockNLoad directly to the raised rails on your 4Runner: 60" Long x 54" Wide LockNLoad # Y05045 SL Adapter # Y05042-2 TimberLine Towers # Y33TR We don't have any brackets designed to fit with the ARB awnings...
view full answer... - The Kuat Grip Ski and Snowboard Carrier for a 2020 Chevrolet SuburbanThe Kuat Grip Ski and Snowboard Carrier, # GRR6B is a slide-out style carrier that will fit arrow bars, round bars, square bars, and most factory roof racks. If you have a cross-bar with T-channel option and prefer that type mount, use the T-Channel Mount Kit for Kuat Grip Ski and Snowboard Carrier, # GRDMK. If you do not already have crossbars on your 2020 Chevy, I recommend the Yakima JetStream Crossbars, # Y00426 mounted with the SkyLine Towers, # Y00148 and Landing Pad, # Y00243. Please...
view full answer... - Platform Tray that Fits Roof of 2018 Chevy TahoeFor your 2018 Chevy Tahoe we have the Yakima platform tray kit part # Y05045, # Y00148, # Y05042-2, and # Y00243 as a confirmed fit.
view full answer... - Roof Platform Tray that Fits 2015 Chevy TahoeI have a way to install a roof platform tray similar to a Rhino Rack Pioneer Platform but Rhino Rack does not have a fit for your 2015 Chevy Tahoe. Instead you'd need to go with a Yakima LockNLoad with the part # Y05045, # Y53TR, # Y05042-2, # Y00243 which gives you a 60 inch by 54 inch platform confirmed as a fit.
view full answer... - Recommended Roof Rack for Drywall and Lumber on 2019 Chevy TahoeFor your 2019 Tahoe, I recommend the Yakima system consisting of: Yakima HD Crossbars - Aluminum - Black - 60" Long # Y01157 SkyLine Towers # Y53TR HD Bar SL Adapters # Y03541 Landing Pad 17 # Y00243 I also recommend adding locks # Y07204 This system will give you strong crossbars with tie down points integrated as well as a load capacity of 165 lbs. It will work well for your drywall, plywood, and loads of lumber within that weight capacity.
view full answer... - Size Bolts in Yakima Landing Pad 17 KitWe aren't able to get the hardware of the Landing Pad 17 but the kit comes with 8 bolts that are M6x1x30 in size.
view full answer... - Easily Loading and Carrying 2 Kayaks on a 2017 GMC Denali XLA roof rack is required first and if you are looking to ease the loading, a lift assist would be important too. The Yukon XL roof weight limit is 150 pounds so that is important in selecting rails, loading 2 kayaks, and their carriers. Yakima makes a solid roof rack option with their 66" roof rack system including parts # Y00410, # Y53TR, # Y03536, # Y00243 A side loading kayak carrier such as the Thule Hullavator # TH898 would help you a great deal loading kayaks. The video below...
view full answer... - How Do I Mount The Surco Safari Rack # SP1101 To My 2015 Chevrolet TahoeYou will need to put a roof rack on your 2015 Chevrolet Tahoe first. I recommend the Yakima JetStream Crossbars # Y00426, the SkyLine Towers # Y53TR and the Landing Pad 17 # Y00243. Now that you have a roof rack to secure your Surco Safari Rack # SU87VR to those bars. You will need to use these Clamp On Adapters # SP1101 to secure your Safari Rack to the bars.
view full answer... - Roof Rack with 60-Inch Crossbars for 2017 Chevy Suburban with Flush Roof Side RailsThe Rola Sport REX Series Roof Rack 59685 is a confirmed fit for your 2017 Chevrolet Suburban but this rack comes as a complete kit and no other lengths of bars are available. If you prefer a longer roof rack crossbar in the 60-inch size we do have options that are displayed on the linked page. Like the Rola rack, all of these Thule and Yakima options feature aero-style crossbars that are quieter than other bar types. The most cost-effective choice is the Yakima Core Bar/Skyline rack...
view full answer... - Crossbars And Cargo Box For 2017 GMC YukonThe Thule Motion XT # TH629706 will fit on your roof. If you have side rails but no crossbars you'll want to get the Jetstream crossbars # Y00426 Skyline Towers # Y53TR and Landing Pad Kit # Y00243. The sooner you order the sooner they will arrive!
view full answer... - Recommended Weight Distribution System for 2019 Chevy TahoeI recommend the Equal-i-zer Weight Distribution w/ 4-Point Sway Control # EQ37061ET for your travel trailer. This system has integrated 4-point sway control and uses clamp-on brackets so there is no need to drill into the trailer frame. The tongue weight capacity for this system is 200-600 lbs so your 430 lbs tongue weight falls nicely in the middle. All of the available roof racks have fixed mounting. If that works for you, there are options with longer bars. I recommend the Yakima Roof...
view full answer... - Recommended Yakima Roof Rack to Fit 2016 GMC YukonThe best Yakima Roof Rack for your 2016 GMC Yukon consists of: 60 inch JetStream Crossbars # Y00426 (black) SkyLine Towers # Y53TR Landing Pad # Y00243 This is Yakima's quietest, most aerodynamic roof rack. It uses built-in WindRidges to contorl air flow over the bars to reduce wind noise and vibration. The bars are strong, durable, and will support up to 165 pounds. I've attached a video review for you to take a look at.
view full answer... - Can I Carry A Rooftop Tent On My 2017 Chevy SuburbanThe good news is that Yakima sells rooftop tents, so their fit guide will always indicate whether their rooftop tents are compatible with their roof rack. This is a good indicator of whether other companies aftermarket roof racks will support the weight of a rooftop tent. Your 2017 Chevy Suburban can carry a rooftop tent. Before rooftop tents we had to keep track of one weight limit. This weight limit is primarily based upon the strength of the vehicle's roof. That weight limit is the...
view full answer... - Parts Needed to Install Round Yakima Bars on a 2015 Chevy SuburbanI have a solution for you, but since your 2015 Chevy Suburban has flush rails and not raised rails the RailGrabs that you have would not work. You would need to start over with the following Yakima roof rack components but would be able to use your roundbars like part # Y00409. SkyLine Towers for Yakima Crossbars # Y53TR RoundBar SL Adapter # Y03536 Landing Pad 17 # Y00243
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Edited by:
Daron K
Written by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.