Inno Aero Roof Rack for Naked Roofs - Black - Aluminum - Qty 2
Item # IN37PR
Our Price: $485.96
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
- All Info
- Reviews (120)
- Q & A (0)
- Videos (23)
- Photos
Inno Roof Rack - IN37PR
- Aero Bars
- Crossbars
- 51 Inch Bar Space
- Inno
- Black
- Overhang
- 2 Bars
Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.
Features:
Inno Aero Aluminum Load Bars - 51" Long - Black - Qty 2:- Low-profile crossbars let you build a roof rack for your vehicle
- Elliptical shape helps to create an aerodynamic system with no need for a fairing
- Integrated T-slots make it easy to slide channel-mounted carriers and accessories onto the bars
- Clamp-on accessories conveniently wrap around bars
- Flexible rubber strips keep out dirt and allow for simple mounting in T-slots
- Press down on strips and slide accessories into slots - no trimming required
- Plastic coating on strips allows T-bolts to slide easily along channel
- Bottom channels allow easy installation to Inno roof rack feet
- Simply clip the foot into the crossbar and slide it along the channel
- Lightweight aluminum construction is durable and rustproof
- Internal extrusions provide exceptional bar strength
- Glass-blasted powder coat finish resists corrosion, scuffs, and scratches
- Matte black color
Inno Custom Fit for XS200, XS250, and INSU-K5 Roof Rack Feet:
- Custom-fit clamps and pads let you install Inno roof rack feet on your vehicle with a naked roof
- Clamps are designed specifically to fit the curves of your doorjambs
- Mount to roof rack feet with bolts
- Molded pads are custom designed to fit the contours of your roof
- Protect your roof surface from scratches and abrasions
- Press onto the bottoms of your roof rack feet
Inno Through Feet for Aero Crossbars - Naked Roofs - Qty 4:
- 4 Feet let you mount Inno Aero crossbars on your vehicle's naked roof
- Through design helps create an extended-length roof rack that maximizes carrying capacity
- Torque tool included to secure feet to your roof
- Easy, slide-on installation to channels in bottoms of crossbars
- Locking covers secure system to your roof
- Also secure T-slot-mounted accessories to your crossbars
- 2 Keys included
- Durable, weather-resistant AES plastic construction
K859 Inno Fit Kit Hooks for Flush, Through, and INSU-K5 Stays
XB130 Inno Aero Aluminum Load Bar - Black - 51" Long - Qty 1
XS250 Inno Aero Bar Through Stays for Bare Roofs - Qty 4
Video of Inno Aero Roof Rack for Naked Roofs - Black - Aluminum - Qty 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Inno Aero Crossbars Review - 2020 Chevrolet Equinox
Hi, everyone. It's Evangeline here at etrailer. And today, we'll be taking a look at our Inno Roof Rack system with the 54 inch long crossbars, the Through Feet for naked roof, and the Custom Fit Kit for your 2020 Chevrolet Equinox. If you wanna carry cool items like kayaks, or surfboards, paddle boards, or if you wanna carry a roof-mounted bike rack, or have extra cargo options with a roof box or a roof basket, what you first need is an aftermarket roof rack, just like this. So, this is designed to create that roof rack system, even though you have a naked roof on your Chevrolet Equinox. So we'll talk about how it does that, as well as how to install it, right here in this video.
So the crossbars we have here, are the 54 inch long crossbars. So there's different options for you, depending on what you're carrying. If you want the longer kit, that's gonna be this. If you want something that's more low profile, feels more flush, that's gonna be the 51 inch long crossbar kit. I prefer this length, because it gives you more overhang.
So measuring from the end of the tower to right before the end cap, we have 2 1/2 inches of overhang. So for some accessories, you're able to clamp them around the edge, and that makes it easier to reach whatever you have up on there. Now with a naked roof rack, though, you are limited when it comes to the crossbar spread. Now that's because this is custom fit, so it has hooks that fit around the contours of your vehicle. So, you wanna make sure they're in the perfect spot.
So measuring from crossbar spread, which is center to center it would sit at two feet and a half inch, so 24 1/2 inches apart. So, if you have accessories that have your clamps in a specific spot, just double check the appropriate crossbar spread to see if it fits with your roof rack. Next is gonna be the height added to the top of your roof. So, measuring from the top of the roof to the top of the crossbar, we have it at 4 3/4 inches, or about that measurement. And that's gonna be where your cargo sits.
So let's say you're carrying skis and snowboards, you're gonna have those sitting up on there, plus on top of your accessories. If you have extra large bindings, you wanna make sure you have enough clearance between your cargo and the top of the roof, so it doesn't hit your vehicle. This does have a weight capacity of 140 pounds. So, if you're carrying around your different cargo, make sure to add up the weight of the cargo and the weight of your accessory, and make sure that doesn't exceed 40 pounds. Another thing with this is that this is made of aluminum. So, that means your roof rack system itself is going to be lightweight, although your towers will probably be the heaviest part of the system. These are gonna be the Inno Aero bars, and I pretty much like how our more modern bars are designed to be aerodynamic like this. If you had the traditional round or square cross bars and you went down the highway, you would remember hearing all that wind drag and wind noise. This helps reduce that wind drag and wind noise. Plus, it has a T-track system. So once you take the end caps off, or if you don't have enough clearance for underneath for your clamps, you just slide your T-track accessories into it, you don't have to do any cutting or fitting around the accessory, tighten it down. That way you can utilize the entire 54 inch long crossbar, and you're not limited to where the clamps can fit around. So, this system utilizes the Through Feet towers, that allow you to have those crossbars that have overhang. One thing I really like about these towers, is how they have integrated locks. So, some other brands require you to add lock cores, to get everything in place and secure. This one has two keys included and four lock cores, so one for each tower. That way, with that end cap locked in place, people don't have access to the hardware to take off your roof rack. Now, this does not lock your crossbar itself, though. So if you want to lock your accessories, like the T-track accessories that are mounted onto your crossbars, you may wanna consider cable locks, locking straps, or accessories that have their own locks. So, this has a custom-fit kit. That's why it's very important to use our fit guide here at etrailer.com on our website, to make sure you get the right fit for your vehicle. So for example, we have these pads that fit around the contours of our roof. Then we also have these hooks that fit perfectly into our doors. So with everything lined up, if you follow all the measurements correctly, you can install it and then even slam your door on your roof rack without any worries. So this kit is gonna include everything you need to install it, but there's some other things that I use just to make it a little bit easier for me. One of them is gonna be the Moki doorstep. This clips right into the side of your door, gives you that extra height helpful for strapping things down. And speaking of straps, we also have the etrailer cam buckle straps. You can pick up a pair here etrailer, if you have other cargo and accessories to make it easier to strap things down and secure it. Now, the process itself may be a little bit involved, so let's take a look at that. The install process will look kinda confusing at first, and that's just how it is with naked roof racks. But that's what this video is for. Honestly, this is gonna be a very easy to do process, as long as you follow the instructions properly, and get your measurements right. So the first thing we're gonna do, is figure out why are there different numbers for the pads, as well as the hooks. And then we can figure out what our front crossbar is gonna look like, and our rear crossbar is gonna look like. I already installed the front crossbar, let's install the rear one together. So, underneath the foot pads is gonna be a number. So this is 423, and that's gonna fit right onto your towers. And you're gonna wanna make sure it faces the right way. So to make that easier, we are going to install the towers, and notice how this has tabs on top, as well as a bolt. That's gonna line up with our plate. So the plate fits right into this opening here. So you're gonna slide that all the way out to the edge of your crossbar, right over there. Then you're gonna fit the plate into that tray. So just follow or line up those tabs and those openings, and then slide it back through. Now fit your crossbar over the plate. So remember, that's going to line up with that bolt, and then use your included tool. This is gonna be an Allen key, included with your kit, to slightly tighten down that bolt onto the plate. So we're gonna put the pad onto the tower now, and if you're not sure which way it should face, there are little bolts or screws there, just line that up with the holes on the pad. It should pop right through. Then you're gonna measure for where these towers should go. So you just press on that lever on the inside, and then you push the tower through, line it up with the measurements given in your instructions, and make sure it's the same on both sides. Just double check that before you tighten it down with the included tool. Once you have those towers secured to the corrected measurements, let's go check it out on top of our vehicle. I don't put the hooks on just yet. We want this at 500 millimeters away from our center stave, or center portion of our door, so let's just get it roughly up there. So once you have everything lined up, you've double checked that your measurements are good, and you'll also see that you did this right if you can see how this pad is perfectly flushed against the ridges of our roof. So now, our next step is just to line up the hook. We have the metal washer, the plastic washer, and then the bolt. Just slightly throw that on by hand before you tighten it down. Remember when tightening down, try to tighten it down like 75% on one side, then you go to the other side, just go back and forth so you don't over tighten it and skew it. You're gonna use an Inno torque tool. So this one is set to three newton meters, so you wanna use this so you don't over tighten down your roof rack. So, you wanna keep tightening it until you hear it click, and then make sure it clicks twice. Kinda like a gap cap. There we go, that was a click. Once you've tightened down everything, and just double checked that all four towers are good and that all the pads are flush on the ridges of your roof, your final step is to put the end caps on. There's two different end caps. One is gonna be the tower, so that just kinda clips into that hinge. You have it in the unlocked position, turn it to the locked position to secure that end cap. Then you have the nice end caps for the cross bars. Those just pop right in. Do all four tower end caps, all four crossbar end caps. Once everything's in place, that's it, you ready to load this up and hit the road. And this right here was a look at our Inno Roof Rack system with the 54 inch long crossbars, the Through Feet for naked roofs, and the Custom Fit Kit, for your 2020 Chevrolet Equinox..
Customer Reviews
Inno Aero Roof Rack for Naked Roofs - Black - Aluminum - Qty 2 - IN37PR
Average Customer Rating: 4.8 out of 5 stars (120 Customer Reviews)
Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.by: William12/25/2020
Very nice quality, made in Japan. Easy to install using the Inno XS150 base stays. The 51" was a nice size for my 2015 Touareg. Many of the manufacturers recomment wider (53-54"), but I like the narrower profile. Unfortunately, the Aero design still creates a slight bit of wind noise at highway speeds, and it gets worse if the sunroof is raised (vent). I like the soft rubber T-channel material which allows the accessories to mount without cutting the material. I also like the slightly arched shape.
by: Michael Rosario11/08/2023
VolkswagenGolf
2016 GOLF R MK7
Love it! Never installed one of these before. 30mins to put together. Another 30-45mins to install on the car. Once you get the concept for once of the bars, the second one goes by quick. It’s just understanding how it works/how it’s suppose to be installed at first.
by: Brian11/13/2023
I just received and instilled my rack system. Time will tell, but my initial reaction is that of disappointment with the quality of the system, considering what I spent. The cross bars seem to be plastic, and the end caps on the cross bars seem to be plastic and covered with a faux metal chrome. I am curious to see how well this system holds up to the hot Florida sun. The positive is that I like the general shape of the aero crossbars, and they are relatively quiet when I am driving.
by: Kono04/30/2024
Sleek rack thanks to the etrailer consu ltants
by: ft05/21/2024
Waste of money. Most annoying couple hours spent in a long time. Extremely disappointed. Does not fit well. Not exactly a cheap option, but a cheap option in terms of fit and engineering. The instructions online and in the kits do not agree. But there is no helping the design. Plus there are no universal set of instructions--they are all individual items for the fit kit, the bars, etc. But a reasonably inclined person can figure it out so no big deal, but the engineering design is garbage--requires precise measurement yet the design is such that exact measurement is impossible due to the design.
Additionally, the parts are low quality Either low density plastic or easily stripped bolts. Even when as precise as possible, I wouldn't trust it with my kayak. What a mistake. Do yourself a favor and get a Yakima trailer or similar. It isn't that much more money in the scheme of things and then it isn't tied to your car. Can add a hitch to most vehicles anyway.
by: RJK in Delaware08/26/2023
Acura MDX
Racks were perfect for my Acura MDX. They fit like a glove and I have used them several times.
by: John A.04/26/2023
Has worked great for transporting my fishing Kayak as well as small loads of lumber. It has worked fine for about a dozen and a half boards at a time or a couple of sheets of plywood. Just make sure that you have a good way to strap them down as well as maybe a rubber mat to help hold everything in place. The noise from it on the high way can be a lot but certainly not as bad as some that I have heard. I figure that anything on the outside of a vehicle like that will produce some noise.
by: Preston Ghim06/23/2023
2016 Subaru Outback Wagon
worked as expected, I used them to carry my hobie outback kayak (about 100lbs) on my Honda Civic 2016 Coupe (2 doors). They worked with no problem so far (1 year) even under high speed like 70mph.
by: Apple07/05/2021
I upgraded to these Aero Crossbars hoping it would mean a quieter drive with less wind noise. I am so glad I did. There is not noise at all with these bars. I use them with my roof cargo carrier and I don't even notice it is there. These bars are even strong enough to haul my canoe. I am very pleased with them.
by: Peter 10/03/2021
These fit the car along with the other Inno items perfectly. They are very secure when combined with the other Inno products. No worries of the rack system coming off. Using them to transport kayaks using kayak holders.
by: Debbie11/12/2018
2017 Lincoln MKX
We recently purchased 2 kayaks & Thule roof racks from our local outdoor store.
After waiting 2 weeks for our roof racks and J bars to come in we found that the Thule racks did not fit our 2017 Lincoln MKX and they didn't make any racks that would. The vehicle does not have roof racks and has a moon roof.
After a couple of days searching the internet we discovered etrailer.com. We found the Inno roof racks, but still was not sure they would work. We spoke to a repesenative and he assured us that the racks we chose would fit and the Thule J bars we did return would also work. As you can see by the photos 2 days later we were happy Kayakers.
by: Charles01/20/2021
Great Fit for my 2017 Jeep Patriot. Easy install and looks great!
by: Bill10/22/2020
Purchased with the, "Inno Through Feet for Aero Crossbars," for our 2017 Sienna. Pretty simple to install, maybe 20minutes after reading instructions. Seems solid.
by: Nathan 11/06/2021
I’ve had the system in place for over a year now and haul dual kayaks often! I love it! The only thing I wish I could change is the wind noise that’s comes with it. But I’m sure with any rook rack system you get that.
by: Tom09/14/2023
Worked fine after I had rails installed on my BMW X3. Said it would work without them but I tried and couldn’t get them to attach.
by: Matthew05/22/2023
This kit does not fit well. All measurements have been double and triple checked down to the millimeter. The lock on the covers interfere with the hooks. You have to apply so much pressure to get it to close that it makes the rack come loose. Not very satisfied
by: Mark05/15/2022
2014 Ford Flex
I bought these as part of a kit with 60" Aero bars and the appropriate kit for my 14 Flex. I spent probably an hour and a half double checking my measurements and getting them torqued down properly. I spaced the bars on top of the car just a little wider than proscribed because I was planning on carrying 4x8 plywood, and it looked better to my eye. One thing to watch for: The instructions for the car-specific kit (in my case INK263) show the foot spacing measurements for a square bar, and the measuring point for these feet and Aero bars is different. That measurement point is indicated in the instructions for the feet, not the kit. Same numbers, just different reference point. Otherwise, they look good and are rock solid.
by: Gregory 10/13/2023
Really nice!
by: Michael06/29/2020
Installation was a little tricky but once the "feet" were attached to the roof and the bars properly spaced, everything wrapped up very well.
There is no noticeable wind noise with these installed.
by: Craig01/19/2023
Dodge Durango
I did a lot of searching before selecting this rack for my Durango RT (no factory roof rails). It is easy to reinstall once the initial process is followed, I marked my doorjambs with a sharpie and it is easy to set up. Great product!
by: Antonio 11/20/2019
Product is great. Fits perfectly with some minor measurement adjustments. Can be assembled by one person, but helps to have two. Bought the complete roof kit and well as the Inno 80 basket for a Mazda CX3, took about two hours to assemble everything.
by: Brian 02/07/2023
Excellent system. Even better when you consider the price. Thule and Yakima may have the name but Inno has the better product.
by: Christopher10/09/2022
Great racks. High quality parts. Fit perfectly. Went together easily.
by: Peter 10/03/2021
Pontiac Trans Sport Van
These are made perfectly for your vehicle. They are very secure when combined with the other Inno products. No worries of the rack system coming off. Using them to transport kayaks using kayak holders.
25
855
Show More Reviews
See what our Experts say about this Inno Roof Rack
- Roof Rack Systems for 2004 Volvo XC90 with Factory Roof Side RailsThe Thule crossbar part 853-2341-07 is a special 47-1/4-inch square-style roof rack crossbar intended for their specialty rack TH440. It fits on the foot assembly # 753-3603. The square bar roof racks from Thule that are made for your 2004 Volvo XC90 are much longer at 58-inches. These bars will not work on the car. I did call Thule to confirm and they advised there is no way to retro-fit your existing bars to the Volvo. Good thought though. On the linked page you can see all roof rack...
view full answer... - Roof Rack and Kayak Carrier for 2018 Ram 1500 Crew CabFirst thing you'll need to install a roof rack on your 2018 Ram 1500 crew cab like the Inno part numbers # INXB130-2, # INXS200, and # INK653 which is a confirmed fit so that you can mount a kayak carrier like the Thule Hull-A-Port XT part # TH849000 which would work great to carry a 12 foot kayak like you mentioned.
view full answer... - Erickson Big Bed Load Extender and Roof Rack for a 2004 Toytoa TacomaAs long as you have a 2 inch hitch installed on your 2004 Toyota Tacoma the Erickson Load Extender # EM07600-07601 would work well. For a roof rack you would then need the following: Inno Aero Crossbars - Aluminum - Black - 51" Long - Qty 2 # INXB130-2 Inno Through Feet for Aero Crossbars - Naked Roofs - Qty 4 # INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet # INK143
view full answer... - Inno Roof Rack Recommendation for 2016 Honda HRV LXAll of our 2016 Honda HRX roof rack options would fit your LX model. The INNO rack part numbers # INB127, # INSUT, and # INK878 would be a great rack for your naked roof. If you happened to have raised rails you instead would want the part numbers # INXB130-2, # INXS450, and # INTR159.
view full answer... - Roof Rack Recommendation for 2004 Chevrolet Malibu for Use with Snowboard CarrierFor your 2004 Chevrolet Malibu 4-door with a bare roof we offer several options in aftermarket roof racks. You can see all products by clicking on the linked page. You have options in both cost-effective square bar racks like the SportRack # SR1002 (made by Thule) and in more advanced ultra-quiet aerodynamic racks like the Inno Aero Bar Rack made up of parts # INXB130-2, # INXS250 and # INK521. You can use the filters on the roof rack page to select the bar type, features and colors you...
view full answer... - How to Adapt Old Thule 724 Ski Carrier for Use on Aero Crossbars with T-Slot ChannelsIn order to mount your older Thule Ski Carrier model 724 on Inno Aero crossbars like the # INXB130-2 you'll need to use the Thule XADAPT2 AeroBlade and Xsporter Load Bar Adapter for Roof-Mounted Carriers # Xadapt2. The XAdapt2 is designed to convert older Thule carriers for use with aero style bars with T-slot mounting channels; the XAdapt 2 t-slot hardware will fit in the Inno Aero bars t-slots.
view full answer... - Bike Rack Solution for 2017 Honda Civic SI with SpoilerI wish we had a trunk rack that fit your vehicle but we don't have any due to the spoiler. Only option might be a roof rack like the Inno Aero Roof Rack # INXB130-2, # INXS250, and # INK683 and then you could use a roof rack like the Malone Pilot part # MPG2103.
view full answer... - What Roof Rack Do I Need for Transporting a Mountain Bike on a 2019 Honda Civic Si Coupe?For transporting your mountain bike on your 2019 Honda Civic Si Coupe with a bare roof, you will need a roof rack system. For a compatible system for your vehicle, I recommend the following parts: - Inno Aero Crossbars - Aluminum - Black - 51" Long - Qty 2 # INXB130-2 - Inno Through Feet for Aero Crossbars - Naked Roofs - Qty 4 # INXS250 - Custom Fit Kit for Inno XS200, XS250, and INSUT Roof Rack Feet # INK683 For a bike rack for your vehicle, I recommend the Inno Tire Hold II Roof Bike...
view full answer... - Best Roof Racks for 2015 Lexus RX 350 with Panoramic SunroofWe have options in aftermarket roof racks that will fit well on your 2015 Lexus RX 350 with panoramic sunroof. The type of rack you need depends on how the roof is configured, either with raised factory-installed roof side rails that run front-to-back or with a bare roof without any fixtures. On the linked page just click on your roof type to then see roof racks that will fit. If you have raised rails among the nicer rack choices is the Yakima Timberline/Jetstream system made of parts...
view full answer... - Inno Aero Crossbar Roof Rack that Fits 1999 Toyota TacomaInno does offer their crossbars individually like what fits your 1999 Toyota Tacoma with the part # INXB130 (instead of the pair # INXB130-2) but the rest of the components are sold in a quantity of 4 like with the feet # INXS250 and the fit kit part # INK143.
view full answer... - How Do I Carry Bikes, Kayaks and a Generator When Towing a Travel Trailer? For carrying the Kayak I recommend installing roof rails on your 2007 Lexus GX 470. With the rails you will be able to mount the Malone DownLoader Kayak Carrier # MPG114MD to the rails and will be able to carry 2 kayaks on your roof. If your Lexus already has the factory side rails that run front to back, the Inno Aero Crossbars # INXB130-2 and Inno Through Feet for Aero Crossbars # INXS150 will be what you need for the kayak carrier. With no factory rails you will need the Rhino-Rack...
view full answer... - Can 2018 Toyota Sienna Sunroof Be Opened with Roof Rack InstalledWe generally side with the manufacturers when it comes to opening the sunroof with a roof rack installed; do so at your own risk. With the small amount of clearance you have on your 2018 Toyota Sienna I don't see you being able to safely open up that rear sunroof with the Malone AirFlow2 Roof Rack # MAL84AR, but I may have an alternative solution for you from Inno with these parts: - 51" Inno Aero Crossbars # INXB130-2 - Inno Through Feet # INXS150 This roof rack uses straps to secure...
view full answer...
- Recommended Roof Rack to Carry Bikes On 2017 Honda Civic Si CoupeThe roof rack options we have available for a 2017 Honda Civic Si Coupe are from Inno not Rhino-Rack, the Inno Aero Crossbar part # INXB130-2,part # INXS250, and part # INK683 is what I recommend. This will then allow you to use pretty much any roof mount bike rack like the Thule ProRide XT Roof Bike Rack part # TH598004. I have attached a full list of options below.
view full answer... - Recommendation for a Roof Rack and Kayak Carrier with Slide Out Roller for a 2002 Isuzu AxiomYou will need the following items to install cross bars on the naked roof of your 2002 Isuzu Axiom: Crossbars # INXB130-2 Feet # INXS250 Fit Kit # INK117 Once you have the cross bars correctly installed you will be able to use the Malone Channel Loader Kayak Load Assist, item # MAL48FR, along with another set of cross bars. You can then use any of the Yakima Kayak carriers including the Kayak Carrier, item # Y04082 to secure your kayaks on the roof of your vehicle.
view full answer... - Recommendations for Carrying Bikes with a 2019 Mini CooperFor your 2019 Mini Cooper we have a couple different options for bike carriers. We have roof mounted rack options and trunk mounted options. Most people prefer the trunk mounted option for ease of loading. I recommend the Yakima FullBack 2 Bike Rack # Y02634 or the 3 bike # Y02633. This carrier is very well made and comes with the locks to secure your rack and secure your bikes. If you have the optional wing type spoiler, the straps can be routed under the wing not over it. If you...
view full answer... - Crossbar Setup that Can Be Used on Both a 2010 Hyundai Sontana & a 2017 Ford EscapeUnfortunately there is not a fit kit that will allow your Rhino Rack Aero bars using the 2500 series legs with both your Hyundai Sonata and your Ford Escape. Rhino-Rack doesn't actually make any crossbars for the Hyundai Sonata, so you'd need to use a different set of bars. You could instead use the Inno Aero Crossbars # INXB130-2, with the Inno Through Feet for Aero Crossbars # INXS250, the fit kit # INK537 for the Sonata, and # INK628 for the Escape. These bars are Aero bars like your...
view full answer... - Cargo Boxes Compatible With 44 inch Crossbar Spread On A 2021 Toyota Tacoma With OEM Roof Rack?Be sure to measure from the Center of the front bar to the center of the rear bar to get an accurate crossbar spread. I just want to make sure that you have the right measurement because there isn't a box that is designed to fit that long of a spread. The closest thing i have is a 42 inch crossbar spread with the Yakima SkyBox 21 # Y07337 and that won't fit. Your only option would be to stow the factory roof rack away and get the Inno Through Feet # INXS150 and the Aero Crossbars # INXB130-2....
view full answer... - Roof Rack Recommendation For 2004 VW Passat w/ Bare RoofWe sure do! I recommend going with the Inno Aero roof rack system for your 2004 Volkswagen Passat Sedan because it's cost-effective but also has a quality build. Here are the parts you need for this setup: - 51" Aero Crossbars # INXB130-2 - Through Feet # INXS250 - Fit Kit # INK533
view full answer... - Roof Rack and Kayak Carrier Recommendation for Transporting 2 Kayaks on a 2011 Kia SorentoFor your 2011 Kia Sorrento with the panoramic Vista roof with raised rails, I recommend using a through-foot aero bar system for maximizing the available crossbar space. For that rack, I recommend the following: - Inno Aero Crossbars - Aluminum - Black - 51" Long # INXB130-2 - Inno Through Feet # INXS150 With this extremely aerodynamic crossbar system, you ultimately receive a quieter ride and increased fuel efficiency. With the through feet, you get the overhang on both sides for more...
view full answer... - Recommended Roof Rack For 2017 Ford Explorer That Will Accommodate A Roof Top TentI have a solution for you, but there are not any roof racks for your 2017 Ford Explorer that are rated for 190lbs when vehicle is in motion. I will give you a few roof rack recommendations so you are aware of your options. If your 2017 Ford Explorer has factory raised rails running front to back then you will want to go with Inno Aero Crossbars - Aluminum - Black - 51" Long # INXB130-2 along with the necessary Feet # INXS350 and Fit Kit # IN28FR. This has the highest weight capacity available...
view full answer... - Longer Crossbar Roof Rack Recommendation for 2004 Toyota MatrixThe underside of the Thule Evo Wingbars like the 43 inch long part # TH711100 has a channel used for attaching to a roof rack foot but it does not go all the way down the length of the bar. What this means is that you won't always be able to install a longer bar than what Thule recommends as you may run out of channel length. I attached a picture that shows what the underside of the bar looks like. Best option would be to go with a longer bar setup that has been confirmed as a fit like...
view full answer...
- Roof Rack For 2008 Honda CR-V For Thule HullavatorYou can use the Thule Hullavator, but it will not fit the factory roof rack of your 2008 Honda CR-V. So if you have the factory rack you will need to replace it with a different rack (this will also be what you need to do if you do not have a roof rack at all) from Inno. Here is exactly what you'll need: - Inno Aero Crossbars # INXB130-2 - Inno Through Feet for Aero Crossbars # INXS350 - Custom Fit Kit # INTR121 - Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs # TH898 You...
view full answer... - 2021 Toyota RAV4 Roof Rack and SUP Carrier Recommendation with Load AssistI have the perfect solution for a lift assist so you can get your SUP on top of your 2021 Toyota RAV4. The cradles on the Thule Hullavator Pro # TH898 won't fit correctly with a SUP so for your application I recommend going with the Yakima ShowDown # Y04081 instead. The ShowDown will help with up to 30-45% of the weight of your SUP and it adjusts down at the side of the vehicle so it's easier to load your SUP. For a roof rack we have a few options depending on if you have the flush rails...
view full answer... - Cargo box and Roof Rack Recommendation For 2019 Nissan RogueCargo Boxes are not technically vehicle specific, as long as you have a roof rack on the vehicle you can use a cargo box that is compatible with the bars that you have. Measure from the center of the rear cross bar to the center of the front cross bar for the cross bar spread. You also want to measure from the center of the front cross bear to the point where the roof and hatch meet. I recommend to use a box with a more versatile fit like Malone Cargo16 Rooftop Cargo Box part # MPG902...
view full answer...
- Roof Rack Recommendation for 2009 Scion xB for Carrying Roof BoxFor your 2009 Scion xB the Inno Aero Bar roof rack part numbers # INXB153-2, # INXS250, and # INK300 would be a great solution. The aero bars are quieter than square bar roof racks and the minimize fuel mileage loss. The Sears X-Cargo Box that you have would work well with this kit.
view full answer... - Options for Carrying More than 2 Bikes with a 2012 Volkswagen Golf with a Class I HitchYou are correct, anytime you are using a Class I hitch you should never put more than 2 bikes on a bike rack on that hitch. Even if the rack you have is a quality rack that can carry 3 or 4 bikes. The issue is not the bike rack it is the hitch/vehicle. It just does not have the capacity to carry the additional weight, plus the increased leverage of having the weight further out away from the hitch. In most cases it is not the hitch that will bend when overloaded, it is actually where...
view full answer... - Which Inno Rack Do You Recommend for a 2018 Hyundai Tucson?If you used the etrailer.com fit guide to find an Inno roof rack for your 2018 Hyundai Tuscon with a bare roof, all of those crossbar lengths will work for your vehicle. The racks that we have confirmed on our fit guide are confirmed to securely fit onto your vehicle properly. For a recommendation of an Inno roof rack, I recommend the following parts: - Inno Aero Crossbars - Aluminum - Black - 51" Long and 54" Long - Qty 2 # INXB130-138 - Inno Through Feet for Aero Crossbars - Naked...
view full answer... - Recommended Roof Rack and Kayak Carrying Option for 2020 Mazda CX-5Inno offers a couple different options that would work well with your CX-5. Inno might not have the brand-name recognition of Thule or Yakima, but they make an excellent product that's usually less expensive than products from the more well-known companies. For a rack that uses more aerodynamic oval profiled crossbars, you can assemble a roof rack out of the following parts: Black Aero-style crossbars, part # INXB138-145 Roof Rack Feet, part # INXS250 Vehicle Specific Clamp Kit, part...
view full answer... - Roof Rack Space Options For A 2019 Nissan RogueYou have the right foot pack and the Thule ProBar Crossbars - Aluminum - 69" Long - Qty 2 part # TH713600 will work on them and have overhang over each side. A key consideration here besides crossbar space is that the 2019 Nissan Rogue has a service load capacity of 165lbs for the roof so the combination of your roof rack and 4 kayaks/2 kayaks & Rocketbox combination total weight would need to be under that amount to safely transport. As long as the crossbars you use aren't wider than...
view full answer... - Availability of a Roof Rack to Fit a 2012 Nissan CubeWe carry several brands of roof rack that will work well on your 2012 Nissan Cube. The racks vary from a base line model to a top of the line roof rack system. Our base line model that is confirmed to fit your vehicle is the Inno Square Bar Roof Rack System, # INB147 Square Crossbars, # INSUT Feet for Inno Square Crossbars, and # INK370 Custom Fit Kit. The Inno square bar rack is constructed with hardened steel to provide strong bar support. The bars dimensions are 58 inches long x 7/8...
view full answer... - Inno Roof Rack and Yakima Kayak Carrier Fitment on a 2010 Honda Accord CrosstourThanks for reaching out to verify, Frank! Yes, those parts (listed below) will fit great together and on your 2010 Honda Accord Crosstour with the naked roof. Inno Roof Rack - Aero Crossbars # INXB130-138 - Through Feet # INXS250 - Fit Kit # INK587 The Yakima Kayak Roof Rack w/ Tie-Downs # Y04083-04082 is designed to clamp around this very style of crossbar to everything will fit very neatly together!
view full answer... - 2012 Chevy Volt Roof Rack Recommendation Similar to Thule AerobladeThule currently does not have any roof rack fits for your 2012 Chevy Volt so the best option we have would be to go with a new rack that is most similar with the Inno aero bar roof rack part numbers # INXB130-138, # INXS250, and # INK624 and you'd be set.
view full answer... - Roof Rack Recommendation for 2016 Kia Soul and 2014 Honda CrosstourIf possible it's a better option to go with a roof rack that attaches to fixed mounting points on the roof of the vehicle than using door clamps. This will give you a quieter and less likely to damage vehicle paint solution. For that the best option is the Rhino Rack Roof Rack part numbers # RRVA137B-2, # RRRLKVA, and # DK404. Thule doesn't have any racks that fit your 2014 Crosstour so the best option for that would be the Inno Aero rack part numbers # INXB123-130, # INXS250, and # INK587....
view full answer... - Erickson Big Bed Load Extender and Roof Rack for a 2004 Toytoa TacomaAs long as you have a 2 inch hitch installed on your 2004 Toyota Tacoma the Erickson Load Extender # EM07600-07601 would work well. For a roof rack you would then need the following: Inno Aero Crossbars - Aluminum - Black - 51" Long - Qty 2 # INXB130-2 Inno Through Feet for Aero Crossbars - Naked Roofs - Qty 4 # INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet # INK143
view full answer... - How to Carry Spare Tire on Roof of 2014 Mazda CX-5Typically we only see front mount hitch receivers for bigger trucks or vehicles that are known for going off-road like a Jeep. To carry your spare tire in an alternate location on your 2014 Mazda CX-5 we will need to look to the roof. I recommend using the Yakima OffGrid # Y07138 and the Spare Tire Carrier # Y07076 to accomplish this. The OffGrid has a really sleek look and it's really easy to install. The crossbars on top can double as roof rack bars for a bike or kayak carrier if you...
view full answer... - Best Roof Rack Option For 2020 Nissan Rogue With Naked RoofThe best roof rack option for the 2020 Nissan Rogue with a naked roof is Inno Aero Cross bars # INXB138-2 with Inno feet part # INXS250 and custom fit kit part # INK466. The Inno bars are low profile aerodynamic bars that are designed to cut down on the wind noise that you may experience with other brands available. The built in t-slot makes it easier to mount accessories like bike racks and water sport carriers. Other brands do require cutting the rubber strip in the t-slot to make room...
view full answer... - Recommendation For A Roof Rack System For A 2016 Fiat 500X With SunroofIf your 2016 Fiat 500X has a naked roof, I recommend going with an Inno solution which includes: Inno Aero Crossbars (Item # INXB130-138), Inno Through Feet (Item # INXS250), and the Custom Fit Kit (Item # INK482). This Inno Roof Rack Kit will have a crossbar spread of 26 inches and a maximum capacity of 100-lbs. It comes with locking covers for increased security. If your 2016 Fiat 500X has flush mounted rails, I recommend going with a Thule solution which includes: WingBars (Item...
view full answer... - Roof Rack Recommendation for 2004 Chevrolet Malibu for Use with Snowboard CarrierFor your 2004 Chevrolet Malibu 4-door with a bare roof we offer several options in aftermarket roof racks. You can see all products by clicking on the linked page. You have options in both cost-effective square bar racks like the SportRack # SR1002 (made by Thule) and in more advanced ultra-quiet aerodynamic racks like the Inno Aero Bar Rack made up of parts # INXB130-2, # INXS250 and # INK521. You can use the filters on the roof rack page to select the bar type, features and colors you...
view full answer... - Roof Rack Option for 2010 Pontiac VibeSo it sounds like you are looking for a roof rack for your 2010 Pontiac Vibe where part of it is attached to the fixed mounting points and the other is a clip-on option. While we do have a nice rack option, there isn't a good option for that because of the types of roof racks available for this vehicle. The best available rack option is a from Inno and it uses bars that go past the rack's feet, and uses a fit kit to clamp on, which is made up of the following parts: - Inno Aero Crossbars...
view full answer... - Roof Rack Fit on a 2014 CamryThe Rola 59733, is not a confirmed fit for your 2014 Toyota Camry. The good news is, there are a number of options available to you, and I recommend the Inno Crossbars # INXB138-2, Feet # INXS250, and Fit Kit # INK872.
view full answer... - Recommended Roof Rack And Paddleboard Carrier For 2015 Lexus NX 300h With Naked RoofAll three of the Inno roof racks will work well on your 2015 Lexus. The difference between the roof racks are the crossbars and feet. Our least expensive roof rack features square crossbars, while the other two roof racks have aerodynamic bars. All three roof racks have the same weight capacity at 140 lbs. Since aerodynamic crossbars will mean less wind noise and drag I recommend the NX 300h roof rack. To order this roof rack you will need part # INXB138-145, part # INXS250, and part...
view full answer... - Bike Rack Solution for 2017 Honda Civic SI with SpoilerI wish we had a trunk rack that fit your vehicle but we don't have any due to the spoiler. Only option might be a roof rack like the Inno Aero Roof Rack # INXB130-2, # INXS250, and # INK683 and then you could use a roof rack like the Malone Pilot part # MPG2103.
view full answer... - What Roof Rack Do I Need for Transporting a Mountain Bike on a 2019 Honda Civic Si Coupe?For transporting your mountain bike on your 2019 Honda Civic Si Coupe with a bare roof, you will need a roof rack system. For a compatible system for your vehicle, I recommend the following parts: - Inno Aero Crossbars - Aluminum - Black - 51" Long - Qty 2 # INXB130-2 - Inno Through Feet for Aero Crossbars - Naked Roofs - Qty 4 # INXS250 - Custom Fit Kit for Inno XS200, XS250, and INSUT Roof Rack Feet # INK683 For a bike rack for your vehicle, I recommend the Inno Tire Hold II Roof Bike...
view full answer... - Best Roof Racks for 2015 Lexus RX 350 with Panoramic SunroofWe have options in aftermarket roof racks that will fit well on your 2015 Lexus RX 350 with panoramic sunroof. The type of rack you need depends on how the roof is configured, either with raised factory-installed roof side rails that run front-to-back or with a bare roof without any fixtures. On the linked page just click on your roof type to then see roof racks that will fit. If you have raised rails among the nicer rack choices is the Yakima Timberline/Jetstream system made of parts...
view full answer... - Recommended Roof Rack For 2018 Chevy Traverse With Naked RoofThanks so much for the photo, and it shows your 2018 Chevy Traverse has a naked/bare roof. And the roof rack that fits actually uses clips that grasp onto the door jamb, so they don't actually fit into a channel. The best roof rack for your '18 Traverse is one that installs that way, from Inno: - Inno Aero Crossbars # INXB153-2 - Inno Through Feet for Aero Crossbars # INXS250 - Fit Kit # IN63FR This is the best roof rack for your Traverse with a naked roof because it is the quietest,...
view full answer...
- Recommended Roof Rack For A 2012 Honda Crosstour When installing a roof rack on your 2012 Honda Crosstour I recommend the following parts to make the complete rail kit: Inno Aero Crossbars - Aluminum - Black # INXB123-130 Inno Through Feet for Aero Crossbars # INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet # INK587 The three items mentioned above will give you a complete roof rack system for your 2012 Honda Crosstour. The rack has a weight capacity up to 165 pounds. The bars have a glass-blasted powder coat...
view full answer... - Which Roof Rack Will Fit My 2012 Honda Civic Si?Yes, under the 2012 Honda Civic in the vehicle fit guide you can click on roof racks and enter in the option for "coupe". I recommend looking into an aero crossbar setup which will be low-profile, quiet, and have less vibration compared to other designs. I would also look at one that has the top channel/track which allows for various accessories to be easily installed or removed. An economical setup that has the top channel for accessories is the Inno Aero Crossbars - Aluminum - Black...
view full answer... - 2017 Ford Escape Roof Rack Recommendation for Use with Thule Pro Ride Roof RackYour Thule Pro Ride bike rack part # TH598004 is designed to basically fit all crossbar shapes so then for a roof rack for your 2017 Ford Edge the roof rack with the longest crossbars which will make carrying all three of the bikes as easy as possible the Inno rack part numbers # INXB145-2, # INXS250, and # INK676 would be your best option as this is an aero bar rack with 57 inch long crossbars.
view full answer... - Is There a 2 Hitch for Bikes on a 2019 Volkswagen Golf SThe only confirmed trailer hitch options for a 2019 Volkswagen Golf S are class 1, 1-1/4" like the Curt Trailer Hitch Receiver # C11412. This will allow you to carry up to two bikes using a rack like the Thule Camber Bike Rack for 2 Bikes part # TH9058. Unfortunately, we don't have any options that allow you to carry more bikes on the rear. The only option we have for you to carry more bikes is on the roof with a roof rack like the Inno Square Crossbar System composed of part # INB127,...
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Edited by:
Daron K
Updated by:
Alex H
Written by:
Ashley K
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.