bing tracking image
  1. Roof Rack
  2. Scion
  3. xB
  4. 2008
  5. Rhino Rack
FITS 2008 Scion xB
Rhino-Rack Heavy Duty Roof Rack - Naked Roof - Silver - Qty 2

Rhino-Rack Heavy Duty Roof Rack - Naked Roof - Silver - Qty 2

Item # RR36JP
Our Price: $496.57
Roof Rack
Confirmed to Fit
2008 Scion xB

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
The best technical support and full roof rack installation instructions. Great price xB roof rack and expert service. Scion xB, 2008 roof rack by Rhino Rack are available from etrailer.com. For expert service call 1-800-940-8924 to order your Rhino-Rack Heavy Duty Roof Rack - Naked Roof - Silver - Qty 2 part number RR36JP, or order online at etrailer.com.
  • All Info
  • Reviews (98)
  • Q & A (0)
  • Videos (3)
  • Photos

Rhino Rack Roof Rack - RR36JP

  • Square Bars
  • Crossbars
  • 54 Inch Bar Space
  • Rhino Rack
  • 2 Bars
  • Silver
  • Overhang

These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack. The square bars include built-in C-channels for mounting Rhino-Rack heavy-duty, contractor-grade accessories.


Features:

Rhino-Rack HD Crossbars - Silver - 54" Long - Qty 2:
  • Heavy-Duty square crossbars let you build a roof rack system from scratch
  • Built-in C-channel on top of each bar is designed for mounting Rhino-Rack Heavy-Duty accessories and carriers
    • Rubber strip in the channel helps to cushion load and provide slip resistance
  • Built-in channel on bottom of each bar for mounting to Rhino-Rack Heavy-Duty roof rack legs
  • Lightweight, extruded, structural-grade aluminum construction for strength and durability
  • Silver color

DK Fit Kit for Rhino-Rack 2500 Legs - Heavy Duty:
  • Padded, metal clamps provide secure grip on your door jambs
    • Bolt onto leg assemblies and tighten for secure fit
    • Protect door jambs from scratches and abrasions
    • Powder coated for durability and rust resistance
  • Molded-rubber pads are custom designed to fit the contours of your roof
    • Clip onto the bottoms of your roof rack legs
    • Protect your roof from scratches and abrasions

Rhino-Rack 2500 Legs - Qty 4:
  • Legs help to mount Rhino-Rack crossbars to your vehicle's naked roof or fixed mounting points
  • Leg bases pivot to ensure the crossbars are level on your roof
  • Locks secure system to your roof
  • UV-stabilized, glass-reinforced nylon is durable and weather resistant
  • Allen key included to ensure legs are securely mounted to your roof


DK152 Custom DK Fit Kit for Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof

RB1375S Rhino-Rack Heavy-Duty Roof Rack Crossbar - Silver - 54" Long - Qty 1

RLKHD Rhino Rack 2500 Series Leg Kit for HD Cross Bars - Qty 4



Video of Rhino-Rack Heavy Duty Roof Rack - Naked Roof - Silver - Qty 2

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Rhino Rack Roof Rack Review - 2012 Scion xB

Today on our 2012 Scion xB, we're going to take a look at the Rhino-Rack Vortex Aero Crossbar roof rack. The crossbar number will be RRVA137B-2. The Series Legs will be RRRLKVA, and the clamps and pad will be DK152. Now, I already have the first one already on our vehicle. Going to show you how we install the second one. What we have up here, we have our crossbar, we have our Series Leg, then we have our clamp and pad here. We have our covers to cover up our Series Legs.

We have our end cap, plus we have our tool to lock the end cap, and the Rhino tool itself. Now I have one part already on, I'm going to show you how to put the other part on. Per instructions, I'm going to make a measurement of 11.5 cm, so I can center our leg. First I need to go ahead and put on our pad, and the pad, the arrow should be pointing out, and the arrows on here are also going to be pointing out. When I mean out, it'll be out going toward the back of your vehicle. I'm going to put this on like so, it pretty much clamps on. I'm going to go ahead and add this on, like I say, it slides into the little T-slot here.

Just going to make sure I have it straight, slide that on. Make my measurement to 11.5 cm. Then, I'm going to go ahead and tighten it up with our Rhino tool. That's tight. I'm going to add in our clamp. What we've got to do is take off this bolt here, slide this in there.

Go ahead and start to turn it. Now we're ready to put it on our vehicle, so I'm going to open up our doors. I'm going to pretty much put this on over to the other side, get this side over here. Now what I have to do is, between the two crossbars, our measurement is going to be seventy centimeters. I'm going to go ahead and make that measurement now. It'll be from the middle of here to the middle here.

I'm going to go to the other side and do the same. Now I can start tightening it up. We're just going to take our allen wrench, here, start to tighten this up. As this gets tight, the little blue handle here, if you can see, has a little curve in it. Once it starts getting tight, its actually going to turn almost straight like that. I'm going to start on this side, do a couple of turns, then I'm going to go on the other side. I don't want it to start pulling from one side, so I want to make sure each side gets evenly tightened up. Continue to tighten on this side here, we're going to make this nice and snug, go back over here. The one things about the Rhino roof rack, you'll also have all your accessories, you can find on our website, such as bike racks, ski and snowboard carriers, even kayak carriers also, and all other accessories. I'm pretty much just getting tight, so it's about that time for me to go ahead and stop. That's pretty tight, so I'm going to go ahead and put our end cap on. Our end cap, it already has a lock on it, so it's going to be good, we can leave it on our roof. We're going to put on our end cap here, like so. With the key we have, we're going to turn this. If you have any accessories loaded into the T slot itself, we can put it on there, lock it up, and you can leave it on your vehicle at all times. We're going to go ahead and close this up, go to the other side, continue to finish this one up. Put on the end cap, here, go ahead and lock that up. Take our cover, put that in, and now we're ready to go. That's going to complete our look at the Rhino-Rack Vortex Aero Crossbar roof rack on today's 2012 Scion xB.


Customer Reviews

Rhino-Rack Heavy Duty Roof Rack - Naked Roof - Silver - Qty 2 - RR36JP

Average Customer Rating:  4.5 out of 5 stars   (98 Customer Reviews)

These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack. The square bars include built-in C-channels for mounting Rhino-Rack heavy-duty, contractor-grade accessories.

by:

These are the perfect racks for a low profile mounting of solar panels on my Sprinter van.



by:

This works great. Very strong and reliable. Holds my ladders with ease. I’ve had it loaded down and done 80mph on the highway no problem.



by:

Very good product the installation instructions are spot on very easy to install it's a two person job though. .I really love the way this looks on my scion xb



by:

The rack fit well and was easy to install. Seems to be made well. The problem is the amount of road noise. I never even put the basket on. It was so loud, it roared. I repositioned it several times but the noise was way too much and I finally just removed it. I spent a lot of money for the rack and the basket and now they are in storage. I wish it would have worked out better because I thought it looked really good.



by:

Ordered a Rhino Rack for my 2014 GMC Sierra 2500HD Denali. Rack arrived in very good shape and all items were there. Installing at this time and see no problems ahead.



by:
Nissan Versa

This rack works perfectly on my Nissan Versa for carrying my two Perception Sound 9'6" kayaks. The Rhino-Racks look good to me. The kayaks can rest directly on the rubber pads on the rails, unlike the Yakama racks I had in the past that had bare pipe rails. Also, I expect I can buy parts to adapt this product to a different car without having to buy new towers. I am sorry there are not hooks or loops to attach bungees when carrying lumber. They are noisy in the wind, but less so when carrying the kayaks.



by:

Great product. I put the removable racks and brackets on my car as soon as I received them in the mail and have not removed them since. They are used everyday to hold my Yakima rooftop box.



by:

I love the racks, instructions were understandable, one of my end caps came in bad, it can wiggle off after locking but I emailed etrailer and they arranged a replacement quick with rhino rack, pretty nice of them, comes with rhino rack decal and just have to decide where to put it, out my bike up and took it for a test drive and it was very nice, I love their package because it comes with locks and way cheaper than the competitors, very satisfied



by:
2007 Ram 2500

My Rhino-Rack Aero 2500 roof racks fit solidly on my 2007 Honda Civic EX. I was really impressed with the construction and strength of the rack system. Also the versatility of the 'legs' with a swivel pad allow them to fit any roof pitch perfectly. The clamps are so solid, nothing could knock these racks off. I added a paddleboard attachment and went surfing today. The black racks also look great with the black trim on my silver Honda. Great product at a much better price than Yakima or Thule.



by:
Mazda

Thanks to Etrailer, I am ready to do some serious summer exploring with my 2013 Mazda 3! Rhino Racks, Malone top box, and Kuat bike rack!



by:
Honda

I struggled to find a good cost effective roof rack for our Honda Hybrid, for hauling kayaks. etrailer by far had the easiest web site for ordering, with quick feedback on delivery. Instructions from Rhino were not the best, but had it complete in an hour. Fits great, and is secure! Thanks. Have ordered many products from etrailer, they are the first place to go for items. Great service!



by:
2009 Honda Civic

Fast shipping from strainer. Easy to install to my 2009 Honda Civic sedan. Very sturdy and high quality product! I have a Yakima high road installed and it’s perfect for this roof bar.



by:

Very impressed with this rack system so far! Was hesitant at first based on some reviews talking about wind noise, but with the windows up I can hear almost no difference. The noise isolating strips are inside the rack after removing the end cap, so be sure to give them a good shake before assuming they are missing (as per the instructions). Very sturdy and assembled easily.



by:

Good quality and locks are included. The plastic lock covers are flimsy but they will keep an honest person honest.



by:
2013 Toyota Corolla

The rack seems excellent… unfortunately the measuring strip dimensions in the directions were wrong for my 2013 Corolla. So by the time I went to put it on the car they were already cut so after making my own measurements the strips are all pieced together. And now I’m not confident my measurements are good… but I know the directions weren’t right because the clamps wouldn’t even reach the door jam.



by:

Thank you for the very speedy customer service! My roof rack is already here!



by:

I am stuck on part 7 of the setup. The instructions do not clearly state the measurement for cutting the bar strip pieces. It says to refer to the DK Specification sheet, but there's nothing clearly labeled as such within my package. Can you please tell me the exact measurements in cm needed to cut the bar strip pieces for the rhino rack 2500 series euro style roof rack on a 2009 toyota corolla.Thank you for the help.



by:

I got the roof rack mounted anyways. Better pics to come when it's all finished!



by:

Great product everything fit perfectly. With the heavy duty bars almost all the hardware for anything you put on the rack is too short



by:

The roof rack is great, just pretty pricy, by me standards.
My only problem with the whole experience was that the roof rack comes in there separate packages. In my order, one package was omitted, which created some confusion. I had to go back to the company and request that the 3rd package be sent.
Otherwise I'm happy with the purchase.
I responded to a previous request fro feedback, so I'm not sure why I'm being asked again, but . . .



by:
National

I was in a roof rack jam. There was a national shortage of the rack I needed for my car and our summer vacation was a week away. I went to etrailer.com when I couldnt find the roof rack anywhere else on the web. Another website actually suggested that they might have what I needed.

I spoke to Ashley E on the phone to make sure that I was picking the right parts. Ashley was very helpful and knowledgable. She helped me find the right roof rack and made sure that I received it in record time. I am a customer for life!!!



by:
2017 Ford F-150

This rack worked out great... I installed in on a 2017 Ford F-150. We drove 6 hrs through wind and rain with a SUP and Tandem Kayak on top. It really took a beating in a storm the whole way. One bracket was a little loose and shifted because of the wind on the Kayak, but it held together. Super happy with Rhino rack!



by:

This kit is easy to slap on and sturdy enough to balance my skis and snowboards. I recently used the Rhino Rack on a three hour drive to a ski resort and had no issues.



by:
2015 ScionxB

We just put up the rack on our Scion XB 2015. Super easy to install with instructions given from YouTube. We did a test drive through the town and on the freeway to see if there was any noise, nothing. So far so great. Package came in the time it said it would show up and just in time for our trip. I'd definitely buy through here again and another Rhino Rack if I needed I one.



by:

The rack was of good quality, solid and anchored well to the car. Putting it on was moderately difficult. The instructions were generalized for different types of cars and that is where the difficulty arose. There were certain quirks about my Corolla that required me to stop and think for several minutes about how something was supposed to be done. As they say, a picture is worth a thousand words. The pictures supplied were helpful but not complete. The thing that I really abhorred about the rack were the security screws. They were like a hex bolt with a strip of metal running down the middle (you will know what I mean if you buy the rack). One of the screws was not quite right and I stripped it trying to tighten it. Not sure why they made it that way but that is the one thing I would change about the kit, ditch that security screw. Overall I would recommend the rack and would buy another if the need arose.


25
2889
Show More Reviews

See what our Experts say about this Rhino Rack Roof Rack

  • Longer Crossbar Roof Rack that Fits 2022 Chevy Colorado
    The crossbars of the Rhino Rack and other roof racks that fit your 2022 Chevy Colorado don't have channels on the underside that run the full length of the bar. Since this is what the rack uses to attach to the feet of the rack it means you can't use longer bars as the feet won't attach. So the best option would be the 54 inch long Rhino Rack HD bar system part numbers # RB1375, # RRRLKHD, # DK330 which is the longest bar setup that fits your truck.
    view full answer...
  • Rhino-Rack Roof Rack Recommendation for a 1989 Mitsubishi Montero with a Naked Roof
    You are correct, the Rhino-Rack Roof Rack Legs that you need for your 1989 Mitsubishi Montero are part # RL280S4. These are the gutter mount feet and they are 11 inches tall. For crossbars, you can use their Heavy-Duty Crossbars, # RB1375B-2 for black or # RB1375 for silver. I have attached the installation instructions for you to check out.
    view full answer...
    Image 1 for
  • What Parts do I Need with My Rhino-Rack 54" HD Crossbars to Fit on My 2012 Ford Edge with Bare Roof?
    According to my research of your Rhino-Rack part number 1375, I think you are most likely referring to the Rhino-Rack Heavy Duty Crossbars -54" Long # RB1375B-2 (black) or # RB1375 (silver) which are confirmed to fit a bare-roof 2012 Ford Edge. If this is what you have, you need the Rhino-Rack 2500 Series Legs # RRRLKHD and the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK228. With both of these components, you will have a full roof rack system on your...
    view full answer...
  • Would Two Sets of Rhino Rack Heavy Duty Bars Double Roof Rack Capacity
    You would be doubling the weight capacity of the roof rack components of the setup but most likely you'd be limited by the roof capacity as the HD Rhino Rack roof rack components do have a capacity of 220 lbs. You'd need a set of tracks like the part # RTC16, four sets of the feet part # RLT500, and two sets of the 65 inch Rhino Rack bars part # RB1650B-2.
    view full answer...
  • Comparison of Rhino-Rack Heavy-Duty and Rhino-Rack Vortex Aero Roof Racks
    The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets # RRRCB-RSHB-RJHB as an example. That's the purpose of the name, and the advantage of the rack. This rack is made up of the following parts: Rhino-Rack Heavy-Duty Roof Rack Crossbars: # RB1375 Qty 2 Rhino-Rack Quick Mount Legs: # RRRLT600 Qty 4 Roof Rack Leg Spacer Blocks: # RRQMHD05-2 Qty...
    view full answer...
  • Roof Rack Mounted Fork Mount Bike Rack Recommendations for a 2016 Toyota Highlander
    A popular roof rack mounted bike rack, fork mount, that is very stable is the Rhino-Rack MountainTrail # RBC035. This carrier is also compatible with disc brakes, accommodates bike wheels up to 3" in diameter, and uses a 9mm skewer. I have linked a video review of this carrier for you. If your bike has a through-axle then I recommend the Yakima HighSpeed, # Y02115. It is designed to hold a bike with a 12-mm, 15-mm, or 20-mm thru-axle fork without an adapter. I have linked a video review...
    view full answer...
  • 2017 Hyundai Santa Fe Sport with Panoramic Sunroof and Flush Rails
    Rhino Rack does offer roof racks that fit the low profile flush rails you have on the roof of your 2017 Hyundai Santa Fe Sport with the part numbers # RRVA137B-2 and # RRSX032 but the HD bar kit you mentioned would only fit the versions of your vehicle without the flush rails. This is an aero bar style rack too which means you'd have minimal wind noise as well as better fuel mileage. The sunroof you have won't be an issue for sure when it's closed, but Rhino Rack recommends checking for...
    view full answer...
  • Roof Rack and 2-Kayak Carrier for 2016 Honda Accord Sport Sedan
    The Rhino-Rack ROC25 Series Heavy-Duty roof rack for your 2016 Honda Accord Sport Sedan that is made of parts # RB1375, # RRRLKHD and # DK359 is indeed a confirmed fit for your car. But note that this rack's unusual bar profile means reduced compatibility of accessory items like kayak carriers. You will have fewer kayak carrier choices with this rack. Instead I suggest their Vortex Aero rack # RR32SR which features quieter aerodynamic crossbars that will generate much less wind noise than...
    view full answer...
  • Will Rooftop Bike Carrier, # S64720, Fit on a 1998 Ford Expedition
    The Rooftop Bike Carrier, # S64720, will fit on Thule, Yakima, and most factory roof rack load bars that run side to side on the top of the vehicle. If you do not have a factory roof rack you can add a roof rack system to your 1998 Ford Expedition if it is an EL model and has side rails that run front to back. You can use the Rhino-Rack roof rack, # RRVA118S-2 and # RRSX100. If it is not an EL model and has factory tracks that run front to back, use # RB1375, and leg set # RLTP-2. With...
    view full answer...
  • Recommended Roof Rack For A 2012 GMC Sierra W/ Extended Cab On A Naked Roof
    I do have a roof rack option that will fit your 2012 GMC Sierra Extended Cab. Unfortunately, it will not be a Thule Rack because the fit kit has been discontinued. I do have a Rhino-Rack alternative that has a maximum weight capacity of 130 lbs with their heavy duty crossbar. This rack will consist of the following items: Rhino-Rack Heavy-Duty Roof Rack Crossbars - Silver - 54" Long - Qty 2, part # RB1375 Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars - Naked Roofs or Fixed Mounting...
    view full answer...
  • Weight Capacity and Comparison of Rhino Roof Racks for a 2011 Acura RDX
    I spoke with my contact for Rhino Rack and he said the weight capacity for all Rhino-Rack roof racks for your 2011 Acura RDX is 110 lbs. I think you were looking at the Rhino-Rack Heavy-Duty roof rack with the Heavy-Duty crossbars, # RB1375, the leg kit, # RRRLKHD, and Custom DK Clamps and Pads, # DK177. The Heavy-Duty crossbars will have a higher weight capacity, but once they are installed on a 2011 Acura RDX, the entire roof rack capacity drops to 110 lbs due to the limitations on the...
    view full answer...
  • Roof Rack, Canoe Carrier and Bike Carrier for 2007 Ford Edge w/ Panoramic Roof
    The Rhino Rack Heavy Duty Crossbar Roof Rack, which consists of the # RB1375 crossbars, the # RRRLKHD roof rack legs and the # DK228 clamp kit would be a fit for a 2007 Ford Edge. You'll want to be careful about opening the sunroof with the roof rack in place. The rack or accessories mounted on it might interfere with the operation of the sunroof. Although the crossbars themselves have a 140 lb weight capacity, you might be limited by the roof capacity of the vehicle if it's capacity...
    view full answer...
  • Roof Rack Recommendation for a 2007 Chevy Avalanche for Transporting Ladder
    For your 2004 Chevy Avalanche the Rhino Rack roof rack part numbers # RRVA137B-2, # RRRLKVA, and # DK227 has been confirmed as a fit and would work well. Your sunroof wouldn't be an issue either. I would recommend keeping it closed since it will be very loud transporting a ladder up there from the wind noise. However, I have a better solution for you in terms of a roof rack for securing a ladder. Instead I would recommend the Rhino Rack HD bar roof rack part numbers # RB1375, # RRRLKHD,...
    view full answer...
  • Recommended Heavy Duty Roof Rack for 2011 GMC Sierra 3500 Crew Cab with Naked Roof
    For your 2011 GMC Sierra 3500 Crew Cab with a naked roof, the Rhino-Rack Heavy-Duty Roof Rack referenced in your question is indeed confirmed to fit the roof of your truck. This system consists of # RB1375 for the two 54 inch Heavy-Duty Crossbars, # RRRLKHD for the 2500 Series Legs, and # DK227 for the Custom DK Fit Kit. This system will provide you with extremely durable aluminum crossbars with built-in C-channels for mounting Rhino-Rack, contractor-grade accessories. The bars themselves...
    view full answer...
  • Roof Rack / Crossbar Options For 2020 Ford Escape With Or Without Existing Rails
    I have a solution for you, however, my contact at Rhino-Rack confirmed that the Rhino-Rack Heavy-Duty Roof Rack Crossbar # RB1375 is not compatible with your 2020 Ford Escape. It looks like you have a naked/bare roof, in which case you will want to use Rhino-Rack # RR86TB. This kit comes with everything necessary for installation and is going to be your best option for your vehicle with the naked roof and no factory rails of any kind. This setup has a weight capacity of 165lbs and comes...
    view full answer...
  • Tonneau Cover and Rack Options for 2007 Honda Ridgeline
    The tonneau cover manufacturers do offer some covers for other trucks that have the T-slots in the side rails that can be used tor installing a ladder rack like the Yakima OverHaul HD, but unfortunately they don't offer anything like this for your 2007 Honda Ridgeline. If the 165 lb capacity of a standard roof rack would work for you, your best bet would be to go with a tonneau cover like the BAK BAKFlip F1 you'd looked at, part # BAK72601 and use a roof rack on the vehicle. I'd recommend...
    view full answer...
  • Rhino Rack Roof Rack Fit for 2013 Ford Escape
    To install the Rhino Rack Heavy Duty Crossbars on your 2013 Ford Escape you will want to use crossbars # RB1375, leg kit # RRRLKHD, and custom clamps and pads # DK375. If you are interested in the Rhino Rack Aero Crossbars, use # RRVA137B-2, # RRRLKVA, and # DK375. I have attached an installation video of the Rhino Rack aero crossbars on a 2013 Ford Escape for you.
    view full answer...
  • Roof Rack Recommendation for 2019 Hyundai Elantra and iKamper
    For a 2019 Hyundai Elantra with a naked roof, I suggest the Thule SquareBar Evo Crossbars, 53" Long, # TH712400. These will mount to a GT model with or without a glass roof using using the Evo clamp feet, # TH710501 and the fit kit, # TH145112. Or, if you have a sedan, use the Evo clamp feet, # TH710501 and the fit kit, # TH145069. These crossbars have a weight capacity of 220 lbs. The weight a roof rack can support is also limited by the roof capacity for the vehicle, this is outlined...
    view full answer...
  • Will Rhino Rack HD Roof Rack Fit 2012 Honda CR-V with Moon Roof
    The Rhino Rack HD Roof Rack part numbers # RB1375, # RRRLKHD, and # DK284 is a confirmed fit for your 2012 Honda CR-V. It will fit your vehicle with the moonroof, but if your moonroof angles up when opening it could potentially interfere with the bars. You should note that crossbars typically add quite a bit of wind noise. You won't end up wanting to have the moonroof open with the bars installed as it will be quite noisy.
    view full answer...
  • Can Low Rider Towers Fit on Truck Cap Tracks for 2007 Chevrolet Silverado
    Yakima's discontinued Low Rider towers hooked onto raised side rails and then clamped onto crossbars. If you already have these towers, they do not fit the Yakima 60" Tracks for Roof Racks # Y01135 as these are horizontal track systems and not raised side rails. If you're looking for tracks for your truck, I can recommend the Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 71" Long # RTC18 along with Track Mount RLTP Legs # RLTP and Rhino-Rack Heavy-Duty Roof Rack Crossbars -...
    view full answer...
  • Rhino-Rack 2500 Series Roof Rack for 2015 Ford Transit Connect Van
    On the Rhino-Rack system made for your 2015 Ford Transit Connect van, parts # RB1375, # RRRLKHD and # DK417, you will be able to place the 2500-series leg assemblies where you need them so long as they can grip properly on the curved edges of your naked roof. This rack system's heavy-duty crossbars feature a built-in C-channel on top of each bar designed for convenient mounting of Rhino-Rack Heavy-Duty accessories and carriers.
    view full answer...
  • Higher Weight Capacity Ladder Rack that Fits 2019 Ford F-250
    Since your plan is to install the Retrax PowerTrax Pro XR # RTT-80384 if you have a long bed or # RTT-80383 for if you have a short bed all you'd need to install a Yakima OverHaul HD part # Y01151-58 ladder rack which has a 500 lb capacity would be the adapter # Y01155 and that would be covered. Now if you do need more weight capacity the TracRac sliding ladder racks like the # TH43003XT-785 for short bed or # TH43003XT-000 for a long bed and these do have a weight capacity of 1,250 lbs....
    view full answer...
  • Roof Rack Recommendation for a 2015 Hyundai Santa Fe Sport with Naked Roof
    The factory side rails on vehicles usually can't be installed on models that did not originally come with them but that would be a question best handled by a Hyundai dealer who will then probably steer you towards an aftermarket roof rack. So we can cut out the middle man and go right to an aftermarket roof rack. The addition of the clamps on a roof rack does not add any extra wind noise compare to models that don't have a clamp style roof rack. In fact, it is entirely possible, even likely,...
    view full answer...
  • Roof Rack, Bike Rack, and Trailer Hitch Recommendations for a 2015 Ford Transit Connect
    You can add a roof rack to your 2015 Ford Transit Connect. If your van does not have the factory side rails then I recommend a Rhino-Rack roof rack using the following parts: Vortex bars # RRVA137B-2 Feet # RRRLKVA Fit kit # DK417 If you prefer the heavy duty rectangular bars then you would need bars # RB1375, legs # RRRLKHD, and fit kit # DK417. For any roof rack check the vehicle owner's manual or with Ford to determine the capacity of the van roof and go by whichever is lower. For...
    view full answer...
  • 2023 GMC Sierra 1500 Parts for Rhino-Rack HD Roof Rack System
    In order to install Rhino-Rack HD bars on your 2023 GMC Sierra 1500 you'll need the following parts: - 59" HD Crossbars # RB1500B-2 - 2500 Series Legs for HD Bars # RRRLKHD - DK Fit Kit # DK427 I'm not 100% sure what multi-purpose holders you're referring to but if you send me some photos of the parts you have I'd be more than happy to help you minimize the amount of parts you're needing to purchase so you can have a roof rack on top of your truck!
    view full answer...
  • Longer Crossbar Roof Rack that Fits 2022 Chevy Colorado
    The crossbars of the Rhino Rack and other roof racks that fit your 2022 Chevy Colorado don't have channels on the underside that run the full length of the bar. Since this is what the rack uses to attach to the feet of the rack it means you can't use longer bars as the feet won't attach. So the best option would be the 54 inch long Rhino Rack HD bar system part numbers # RB1375, # RRRLKHD, # DK330 which is the longest bar setup that fits your truck.
    view full answer...
  • Recommended No-Drill Roof Rack System To Attach A Rhino Rack Pioneer Platform On 2017 Ram 1500
    To attach the Rhino-Rack Pioneer Platform Roof Tray - Aluminum - 60" Long x 56" Wide # RR42113BF to your 2017 Ram 1500 Crew Cab without drilling you'll need to first install the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 59" Long - Qty 2 # RB1500B-2, Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars - Naked Roofs or Fixed Mounting Points - Qty 4 # RRRLKHD, and the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK043. This system will clamp onto...
    view full answer...
  • Roof Rack and Canoe Carrier Recommendation for a 2008 Chevy Silverado
    A Rhino Rack Roof Rack that includes the part # RRRLKHD would do an excellent job for carrying a 15 foot canoe on your 2008 Chevy Silverado. The rest of the parts needed to complete the roof rack would be the part # RB1375B-2 and # DK227. This is one of the strongest racks we offer so it would definitely take a lot of abuse. It would be great for carrying your canoe. For securing a canoe upside down on the crossbars I would recommend the Ratchet Grab part # RRRRG. I spoke to my contact...
    view full answer...
  • Availability of Rhino Rack Roof Rack JB0308 for 2022 Ford F-250
    So I found online what Rhino Rack sells as their JB0308 and it's actually a combination of parts that we do sell as part # RRRLKHD, # RB1500B (quantity 2), and fit kit # DK498.
    view full answer...
  • How Was Rhino Rack Roof Rack Spread for 2014 Chevy Silverado 1500 Decided
    Roof rack companies like Rhino Rack pick the required spread for their roof racks like the # RB1500, # RRRLKHD, and # DK377 based on where the roof is reinforced the best. We have to recommend you always go with the required spread, otherwise you could potentially damage the roof of your vehicle or the rack may not secure properly. Even though the spread is narrower than you'd like (most racks are right at this same spread) you can still use a canoe carrier like the Yakim KeelOver # Y04069...
    view full answer...
  • Rhino-Rack Pioneer Platform & Backbone Mounting System That Fits 2014 Ram 1500 Crew Cab
    We do have a Rhino-Rack Pioneer Platform and Backbone Mounting System that fits your 2014 Ram 1500 Crew Cab, though it is different than the part number you mentioned, and crossbars are not able to be mounted to it, as this is only for the Pioneer Platform. For your Ram, the platform and mounting that fit are the following: - Rhino-Rack Pioneer Platform Rack with Backbone Mounting System # JB0702 You can mount bars to the platform with the Rhino-Rack Accessory Bars for Pioneer Platform...
    view full answer...
  • Rhino-Rack Heavy-Duty or Vortex Crossbars for 2019 Ford Transit Connect
    The primary difference between the Rhino-Rack Heavy-Duty Crossbars and the Rhino-Rack Vortex Aero Crossbars has to do with what they are designed to carry and what accessories work well with them. The Heavy-Duty Crossbars feature built-in C-channels that are made specifically for Rhino-Rack Heavy-Duty accessories like the Hi-Lift Jack Mounting Brackets # RJHB. Because the bars are larger than most other systems they will not be compatible with a lot of accessories that aren't specifically...
    view full answer...
    Image 1 for
  • Recommended Heavy Duty Roof Rack for 2016 Ford F-150
    I may have a solution for you, however I don't recommend trimming the Rhino-Rack RT-Style Roof Rack Tracks like the 58 Inch # RRRTV148 that you referenced. These strips do feature pre-cut holes for the rivets so trimming any portion of the units will essentially change the way they are meant to attach. You would also need to make sure that the cuts are perfectly straight up and down so the end caps will fit properly. We do have shorter lengths available, such as the 36-1/4 inch # RRRTS540,...
    view full answer...
  • Does Rhino-Rack HD Roof Rack for 2020 Toyota Corolla Sedan Have Static Load Rating
    I checked with Rhino-Rack and they specifically mention they only have dynamic (moving) load ratings, and that is exactly what the 165 lb capacity is with the rack that fits your 2020 Toyota Corolla sedan. Rooftop tents generally only call for a rack to have a certain dynamic capacity so I recommend checking out your tent's manual to find out. As for the roof rack for your 2020 Toyota Corolla, here are the parts you need: - Rhino-Rack Heavy-Duty Roof Rack Crossbars # # RB1250B-2 (Black)...
    view full answer...
    Image 1 for
  • What Parts do I Need with My Rhino-Rack 54" HD Crossbars to Fit on My 2012 Ford Edge with Bare Roof?
    According to my research of your Rhino-Rack part number 1375, I think you are most likely referring to the Rhino-Rack Heavy Duty Crossbars -54" Long # RB1375B-2 (black) or # RB1375 (silver) which are confirmed to fit a bare-roof 2012 Ford Edge. If this is what you have, you need the Rhino-Rack 2500 Series Legs # RRRLKHD and the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK228. With both of these components, you will have a full roof rack system on your...
    view full answer...
  • Height Added to Vehicle with Rhino Rack Foot # RRRLKHD
    We've had a similar question to this in the past and we've found that the Rhino Rack HD roof racks that use the feet part # RRRLKHD and also part # RB1500B-2, # RRRLKHD add right at 4-1/2 inches of additional height that would mean the feet without the bar would be a little less than 3 inches in overall height.
    view full answer...
  • Will the Rhino-Rack Heavy-Duty Roof Rack Fit 2015 Ram 1500 Crew Cab with Sunroof
    Yes, the Rhino-Rack Heavy-Duty Roof Rack, which consists of parts # RB1500, # RRRLKHD, and # DK043, will fit your 2015 Ram 1500 crew cab with a sunroof. Placement of the crossbars is very specific and I have included an attachment which illustrates the measurements for your Ram, as well as the measurement process. With these measurements you will be able to determine exactly where the crossbars will sit in comparison to your sunroof.
    view full answer...
    Image 1 for
  • Height Added to 2016 GMC Sierra 1500 with Rhino Rack HD Roof Rack
    Rhino Rack HD roof racks like the one you referenced part # RB1500B-2, # RRRLKHD, # DK377 add about 4-1/2 inches to the roof of a vehicle according to our contacts at Rhino Rack. Rhino Rack also does not have any fit issues with the antenna of your 2016 GMC Sierra 1500 and this rack either.
    view full answer...
  • Rhino Rack Roof Rack Fits for 2015 Infiniti Q40
    Rhino Rack's online fitguide isn't always up to date. We know for certain that the Rhino Rack part # RR47SR that you referenced and the # RB1250B-2, # RRRLKHD, and # DK211 is a confirmed fit.
    view full answer...
  • Parts Needed to Move Rhino-Rack 2500 Series Roof Rack to 2014 Toyota Prius C
    A vehicle-specific portion of the Rhino-Rack roof racks for your 2014 Toyota Prius C is the Custom DK Clamps and Pad kit # DK351 that you referenced and this kit is used for a number of their 2500-series racks. You may also need a leg kit; which one will depend on the crossbars you have (the 2500 series includes several types). If you have the heavy-duty crossbar # RB1250 you will use leg kit # RRRLKHD; if you have Aero crossbars you'll instead use # RRRLKVA. The link provided will show...
    view full answer...
  • Ladder Rack Recommendation for Camper Shell on 2002 Toyota Tacoma
    We have just what you need. For a rack system that will attach to the camper shell you have installed on your 2002 Toyota Tacoma the TraRac CapRac part # TH29200XT is a confirmed fit and would work well. This is a fixed rack that attaches directly to the cap. See picture. I also attached an install video link for you to check out as well.
    view full answer...
    Image 1 for
  • Using Rhino Rack 50 Inch Crossbars on 2011 Honda Accord
    You can certainly use 50 inch load bars on your Accord. Rhino Rack offers a Heavy Duty rack system that uses 50 inch load bars. You can assemble a system by using the following parts: Heavy Duty 50 Inch Crossbars, part # RB1250B-2 Leg Kit, part # RRRLKHD Vehicle Specific Clamp Kit, part # DK184 The rack has a 110 lb capacity, which might be limited by the capacity of your Accord's roof if it is less.
    view full answer...
  • Roof Rack for 2014 Chevy Silverado 2500 that Could Have Tepui Tent Installed
    I looked up the Tepui Tents and they basically attach to roof rack crossbars like the Rhino Rack roof rack part numbers # RB1375B-2, # RRRLKHD, and # DK227 that you referenced. The only issue you may encounter is that this rack has a weight capacity of 130 lbs.
    view full answer...
  • Will the Heavy Duty Rhino-Rack Roof Rack Fit a 2015 Nissan NV 3500?
    I have a great alternative for your crossbar setup. Unfortunately, the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT is not confirmed to fit your 2015 Nissan NV 3500. However, we do carry a similar heavy duty bar setup by Rhino-Rack that does fit your 2015 Nissan NV 3500. For this setup, I recommend the following parts: - Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2 - Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD - Custom DK Fit Kit for 4 Rhino-Rack...
    view full answer...
    Image 1 for
  • Can I Carry Two Kayaks Side by Side on My Roof Rack?
    The roof rack you're asking about is a Rhino-Rack System with parts # RB1250, # RRRLKHD, # DK376 which has 50" long crossbars. As for if you can carry two kayaks lying down side by side, it's unlikely, but depends on your kayaks. Kayak widths can range from 22" to 30". If you have saddle-style kayak carriers like the Malone SaddleUp Pro # MPG110MD and your kayaks are less than 24" in width, then you can set them up side by side. If your kayaks are too wide though, you can get two J-style...
    view full answer...
  • Do I Have To Drill Afer Installing The Tracks On The Rhino Rack Roof Rack System # Y01-120-NT?
    The foot # RRRLKHD to crossbar # RB1375B-2 is adjustable along the bar with the kit you're looking at # Y01-120B-NT. The only drilling required is to install the tracks so if they are already installed no need to do any more drilling.
    view full answer...
    Image 1 for
  • Roof Rack and 2-Kayak Carrier for 2016 Honda Accord Sport Sedan
    The Rhino-Rack ROC25 Series Heavy-Duty roof rack for your 2016 Honda Accord Sport Sedan that is made of parts # RB1375, # RRRLKHD and # DK359 is indeed a confirmed fit for your car. But note that this rack's unusual bar profile means reduced compatibility of accessory items like kayak carriers. You will have fewer kayak carrier choices with this rack. Instead I suggest their Vortex Aero rack # RR32SR which features quieter aerodynamic crossbars that will generate much less wind noise than...
    view full answer...
  • Rhino Rack HD Roof Rack that Fits 2013 Ram 3500 Crew Cab
    Yes, the Rhino Rack HD rack fits directly to your 2013 Ram 3500 crew cab with the part numbers # RB1500, # RRRLKHD, and # DK043. This rack uses included clamps to secure by clamping to the door frame of the truck which is very secure and also easy to set up without permanent modification.
    view full answer...
  • Rhino-Rack Roof Rack Fit For 2007 Honda Civic Sedan
    Hey Luke, Sorry about the confusion, and we can 100% get your 2007 Honda Civic 4-door sedan set up with all the parts needed for a Rhino-Rack roof rack, including both crossbars. You would just need these parts: - Rhino-Rack Vortex Aero Crossbars # RRVA126B-2 - Rhino-Rack 2500 Series Legs # RRRLKVA - Custom DK Fit Kit # DK152 This will have all the parts needed and give you a rack with both crossbars so you can haul your gear.
    view full answer...
  • All Parts Needed to Add Roof Rack to 2013 Scion xB
    The part you mentioned is the fit kit for a Rhino-Rack roof rack on your 2013 Scion xB, and to complete the roof rack you'll need to add crossbars and the mounting feet, and the locks do come with it. Here is a list of the parts you'd need to add this rack to your Scion: - Rhino-Rack Vortex Aero Crossbars # RRVA137B-2 - Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars # RRRLKVA - Custom DK Fit Kit # DK152 I have added a photo which shows the rack on a Scion xB.
    view full answer...
    Image 1 for
  • How Do Roof Rack Accessories Attach To Rhino Rack 2500 Load Bars
    The Rhino-Rack 2500 Load Bars that you referenced do have t-slots for roof rack accessories to attach to. Check out the picture I attached to see the dimensions of the t-slots. You can also attach accessories around the load bars as well. The dimensions of the load bars are 3-1/2 inches wide and 1-1/2 inches tall. If your roof top accessories can install on load bars with those dimensions you would be good.
    view full answer...
    Image 1 for
  • Roof Rack and Canoe Carrier Recommendation for 2012 Toyota Corolla
    First you'll need a roof rack installed on your 2012 Toyota Corolla so that you can carry a canoe. For that we have the Rhino Rack part numbers # RRVA118B-2, # RRRLKVA, and # DK152 which is a confirmed fit and will be a great rack to mount a canoe carrier to like the Swagman Exo Aero part # S65145 would do a great job to carry the canoe. I attached a review video for this carrier for you to check out as well.
    view full answer...
  • Can You Use Square Thule Crossbars On An Inno Roof Rack Installed On 2008 Scion xB?
    You will want to stick with one brand throughout the entire roof rack kit; various brands of roof racks are not made to be compatible and interchangeable with each other. The most economical roof rack for your 2008 Scion xB is Inno Square Crossbars - Steel - Black - 58" Long - Qty 2 # INB147 with Feet # INSUT and Fit Kit # INK300. This has a weight capacity of 120lbs.
    view full answer...
  • Will SportRack Frontier Roof Rack # SR1002 Fit a 2010 Toyota Corolla
    SportRack semi-custom roof rack # SR1002 is listed as a fit for the 2010 Toyota Corolla. Since this is a semi-custom rack it will not have the best fit when compared to a custom fit rack. For a similar custom fit rack you can use a Rhino-Rack roof rack with Euro style crossbars using the following parts: Aero Crossbars, # RRVA118B-2 Feet # RRRLKVA Custom DK Clamps and Pads, # DK152 I have linked a video showing an installation of the Rhino-Rack roof rack on a 2012 Camry.
    view full answer...
  • Parts Needed to Attach Thule # TH7326 SnowPack Ski/Snowboard Carrier to 2007 Honda Civc 4DR
    You would first need a roof rack for the vehicle. The roof rack would provide the crossbars that are the attachment point for the # TH7326 ski/snowboard rack. To equip the 2007 Civic Sedan with a Thule roof rack, you'd need the following parts: Crossbars, part # TH712400 Roof Rack Feet, part # TH710501 Vehicle Specific Fit Kit, part # TH145190 You also might be interested in a fairing, part # TH82WV. Square crossbars can create some wind noise, and a fairing will help quiet that. Rhino...
    view full answer...
  • Rhino-Rack Vortex Aero Crossbar Compatibility with Thule and Yakima Roof Bike Carriers
    Yes, the T-Track hardware included on the Thule UpRide Roof Bike Rack # TH599000 will let you install it properly in the top channels of Rhino-Rack's Vortex roof crossbars. On your 2012 Scion xB you'll want to order and install Rhino-Rack parts # RRVA137B-2, # RRRLKVA and # DK152 to complete your roof rack. The Yakima FrontLoader # Y02103 and HighRoad # Y02114 bike carriers you referenced will also fit the roof rack but these will install by clamping around the bars. For the HighRoad you...
    view full answer...
  • Roof Rack, Bike Rack And Kayak Carrier Recommendations For 2008 Scion xB
    If your 2008 Scion xB has no rails or crossbars I recommend the Rhino-Rack Vortex roof rack system. This roof rack features the low profile aerodynamic aluminum crossbars with the rubberized Vortex strips in the channel that help disrupt the airflow for a quieter ride. To order this roof rack you will need part # RRVA137B-2, part # RRRLKVA, and part # DK152. If you prefer Black crossbars you can order part # RRVA137B-2. The bike rack I recommend for this roof rack is the SQR Quick-Release...
    view full answer...
    Image 1 for
  • Roof Rack and Cargo Box Recommendations for 2012 Toyota Corolla
    The Rhino Rack Vortex Aero crossbars you referenced that consists of the # RRVA118B-2 crossbars, the # RRRLKVA legs and # DK152 clamp kit would be an economical yet aerodynamic choice for you. If wind resistance is a concern, going with a cargo box would be the way to go. For the most part, a cargo bag takes the shape of whatever's packed in it, while the cargo box is pretty aerodynamic. Keep in mind that putting anything on the roof of your vehicle, no matter how aerodynamic, will increase...
    view full answer...
  • Roof Rack and Kayak Carrier Recommendation for a 2010 Toyota Corolla
    First you will need a roof rack for your 2010 Toyota Corolla 4 door. For that you would want the Rhino Rack part # RRVA118B-2, # RRRLKVA, and # DK152. Then for a kayak carrier for each kayak you would want the Rhino Rack carrier part # S512 which would work great for you kayaks and with the roof rack I recommended.
    view full answer...
  • Rhino Rack Roof Rack for 2015 Scion xB that Uses Fit Kit DK152
    The Rhino Rack roof rack that uses the fit kit part # DK152 for your 2015 Scion xB uses the part numbers # RRVA137B-2 and # RRRLKVA as well and you'd be set!
    view full answer...
  • Are Rhino-Rack Custom DK Clamps and Pads # DK152 a fit for a 2011 Honda Civic
    We do carry Rhino-Rack Road Warrior Rooftop Bike Carrier - Fork Mount # RBC036 I have included a link to a video review of part # RBC036. Rhino-Rack Custom DK Clamps and Pads Part # DK153 is a confirmed fit with the 2011 Honda Civic with 2 doors. Rhino-Rack Custom DK Clamps and Pads Part # DK152 is a confirmed fit with the 2011 Honda Civic with 4 doors. I have included a link to a video of the installation of # DK152 on a 2010 Honda Civic.
    view full answer...
  • Roof Rack System For A 2010 Honda Civic Sedan
    To be able to find the proper mounting kit for your rails that you currently have I would need to know what brand of rails that they're. I would also need to know the usable bar length and what type of rack it is. If you have no idea what the brand of rails you currently have we can set you up with a new roof rack system! The Rhino Rack Vortex Aero Bars come with the parts below to give you the full roof rack for your 2010 Honda Civic. The Rhino-Rack Vortex Aero Crossbars # RRVA126B-2 The...
    view full answer...
  • Roof Rack and Snowboard Carrier Recommendation for 2009 Honda Civic with Sunroof
    One option for an economical roof rack for your 2009 Honda Civic is the Rhino-Rack 2500 Series Roof Rack with Crossbars, # RRVA126B-2, # RRRLKVA, and # DK152. Installation is easy and the included locks secure the rack to your roof. In order to carry your snowboards I recommend going with the Rhino-Rack Ski and Snowboard Carrier, # RR576. This carrier will mount directly to the Euro Square Crossbars, and allow you to transport up to 4 snowboards. Please note that some roof top accessories...
    view full answer...
  • Roof Rack Recommendation for a 2007 Honda Civic 4 Door
    The Rhino Rack roof rack part numbers # RRVA126B-2, # RRRLKVA and # DK152 has been confirmed to fit your 2007 Honda Civic 4 door and would work well for you. The thing about roof racks is they create a decent amount of wind noise so when you open your sunroof it will be pretty noisy most likely but aside from that it shouldn't affect anything else. Finally, yes with these two part numbers you will have everything needed to complete a roof rack on your vehicle.
    view full answer...
  • Roof Rack Options for a 2017 GMC Yukon and 2010 Honda Civic
    I do have options for you but a custom fit roof rack for a 2017 GMC Yukon will not fit a 2010 Honda Civic. Instead, you will need to decide which vehicle you would prefer to have the roof rack on or purchase one for both vehicles. For your 2017 GMC Yukon, I recommend the Rhino-Rack Vortex Aero Crossbar System which is composed of part # RRVA150B-2, part # RRRCH4, and part # RRRCP43-BK. For your 2010 Honda Civic, I recommend using the Rhino-Rack Vortex Aero Crossbar System which is composed...
    view full answer...
  • Roof Rack & Kayak Carriers for 2011 Toyota Corolla
    No worries; we can help get your Corolla set up for transporting your two kayaks. I recommend an aluminum roof rack for both freedom from rust and light weight. The 12-lb Rhino-Rack Vortex Rack made of parts # RRVA118B-2, # RRRLKVA and # DK152 gives you both of these features as well as a lower cost than most others. The Vortex bars are 46-inches and will provide plenty of space for two J-style carriers like # E98878. These side-loading folding carriers feature padded bases to cushion...
    view full answer...
  • Recommended Roof Rack for 2012 Scion xB to Carry Thule Hullavator Pro Kayak Carrier
    The good news is that the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs - Side Loading # TH898 will fit on most aftermarket and factory roof racks, so there are some options available for your 2012 Scion xB. I recommend using the Rhino Rack for 2012 Scion xB that uses the Rhino Rack Vortex Aero bars # RRVA137B-2, the Rhino Rack 2500 Series Legs # RRRLKVA and Fit Kit # DK152. This kit will provide you with a high quality and durable roof rack to fit on the naked roof...
    view full answer...
  • Roof Rack and Stand Up Paddle Board Carrier Recommendation for a 2008 Honda Civic
    To carry 2 paddleboards with a carrier like the Thule SUP part # TH810001 you will first need a roof rack on your 2008 Honda Civic. If you have a 2 door Civic you would need the part # RRVA126B-2, # RRRLKVA and # DK153. If you have a 4 door you would need the part # RRVA126B-2, # RRRLKVA and # DK152. Either rack would work great with the Thule SUP
    view full answer...
  • Can Rhino Rack Square Bars Be Cut Down To Fit A 2014 Scion xB
    For a 2014 Scion xB we recommend the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2, which are 54" in length. As for cutting down longer Rhino Rack square bars, which I don't recommend, you would need a miter saw with a metal cutting blade and could cut the bars to your specific needs. The end caps would need to be removed first so that you could add them on once you finish cutting. You'll also want to paint any exposed metal after cutting. If you need the mounting hardware for...
    view full answer...
  • Roof Rack Recommendation for 2009 Scion xB
    For your 2009 Scion xB the Rhino Rack roof rack part # RRVA137B-2, # RRRLKVA, and # DK152 is a confirmed fit that would work well. Quality wise this rivals Thule easily but the price is much lower. For what you listed this is the perfect rack. Then the rooftop Rhino Rack cargo bag part # RRLB500 would be a fantastic option too. This can carry up to 17.5 cubic feet of storate space. For a more compact option we have the # RRLB250 which can hold up to 8.5 feet of cubic space.
    view full answer...
  • Leg and Clamp Kit to Install Rhino-Rack Vortex Crossbars on a 2011 Toyota Corolla
    The correct parts needed for you to install a Rhino Rack 2500 series Vortex Roof Rack on your 2011 Toyota Corolla with a naked roof would be: Rhino-Rack 2500 Series Roof Rack with Aero Crossbars # RRVA118B-2, # RRRLKVA Custom DK Clamps and Pads for Rhino-Rack 2500 Series Roof Rack System # DK152 Then for a fairing you would want the 38 inch Rhino Rack Fairing part # RRRF2
    view full answer...
  • Roof Rack, Cargo Basket, and Roof Bag Recommendation for a 2012 Scion xB
    For an affordable roof rack confirmed to fit your 2012 Scion xB that is arguably just as good as the really expensive kits you would want the Rhino Rack Roof Rack that consists of part # RRVA137B-2, # RRRLKVA, and # DK152. With these two part numbers you would have everything needed for a roof rack. Crossbars and mounting kit is included. For a cargo basket you could go with the Curt Basket part # C18115, and then for a bag part # RL100A20. I attached a review video for both products for...
    view full answer...


< Previous
12



Do you have a question about this Roof Rack?


Info for this part was:

Employee Wilson B
Updated by:
Wilson B
Employee Alex H
Updated by:
Alex H
Employee Daron K
Edited by:
Daron K
Employee Bethann B
Written by:
Bethann B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.