Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack. The square bars include built-in C-channels for mounting Rhino-Rack heavy-duty, contractor-grade accessories.
Features:
Rhino-Rack HD Crossbars - Silver - Qty 2:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, Steve here with etrailer.com. Thank you for joining me while we take a look at this custom-fit kit, which is gonna allow you to mount full Rhino-Rack 2500 series legs, which are sold separately to the vehicle of your naked roof. Now there's a picture above my left shoulder here of those 2500 series legs. They again, are sold separately. That kind of gives you an idea of what these attach to. Now zooming in here, this particular kit, I've got the part number thrown up there as well.
This kit is DK330, and you're gonna get this custom-fit, which is gonna include padded metal clamps to provide secure grip on your door jams. They do bolt onto those leg assemblies that I mentioned before that are sold separately and they tighten down for a nice secure fit. They do protect the door jamb from scratches, abrasions and they are powder-coated for a durability and rust-resistant. So again, nice powder coat, that's that rubber underneath there to protect the top of your car, you got two pads left and right and two other pads left and right. These are flexible rubber.
And again, they match the contour of your vehicle. According to the instructions that you get as well, one of these would be left-side, one would be right-side, so make sure you're checking all that out in the instructions, they are molded rubber and again, they do clip onto the bottom of the roof rack legs. You get the four clamps and four pads you see here. They do have a limited lifetime warranty. And again, these are a custom-fit.
So always check the instructions. But first, check the etrailer.com fit guide. So go to our website, in the center of the page, there's usually a yellow button, I believe where you can enter your year, make and model. And after that, you will then select the appropriate roof rack kit that you're looking for. So again, this is etrailer.com.
I'm Steven. Thank you for taking a look at our Rhino-Rack kit that fits your Rhino-Rack 2500 series roof rack legs for your naked roof. Have a good one.
Average Customer Rating: 4.3 out of 5 stars (84 Customer Reviews)
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack. The square bars include built-in C-channels for mounting Rhino-Rack heavy-duty, contractor-grade accessories.These are the perfect racks for a low profile mounting of solar panels on my Sprinter van.
The product is good. It would be helpful if the gripping pads had more grip. The truck body does not provide a great mounting opportunity.
The rack fit well and was easy to install. Seems to be made well. The problem is the amount of road noise. I never even put the basket on. It was so loud, it roared. I repositioned it several times but the noise was way too much and I finally just removed it. I spent a lot of money for the rack and the basket and now they are in storage. I wish it would have worked out better because I thought it looked really good.
This works great. Very strong and reliable. Holds my ladders with ease. I’ve had it loaded down and done 80mph on the highway no problem.
Ordered a Rhino Rack for my 2014 GMC Sierra 2500HD Denali. Rack arrived in very good shape and all items were there. Installing at this time and see no problems ahead.
Good quality and locks are included. The plastic lock covers are flimsy but they will keep an honest person honest.
The Rhino-Rack has been great once I figured out the spacing of the supports. Unfortunately, the given spacing did not include the spacing I needed for my 2020 Chevy Colorado. It took some time to figure out the needed spacing before I installed them. Once the spacing is correct, they are easy to install and remove as they were easy to install the following year. I would recommend them to anyone needing a car/truck roof rack.
This kit is easy to slap on and sturdy enough to balance my skis and snowboards. I recently used the Rhino Rack on a three hour drive to a ski resort and had no issues.
This rack works perfectly on my Nissan Versa for carrying my two Perception Sound 9'6" kayaks. The Rhino-Racks look good to me. The kayaks can rest directly on the rubber pads on the rails, unlike the Yakama racks I had in the past that had bare pipe rails. Also, I expect I can buy parts to adapt this product to a different car without having to buy new towers. I am sorry there are not hooks or loops to attach bungees when carrying lumber. They are noisy in the wind, but less so when carrying the kayaks.
I purchased this because I needed 11" brackets and I only needed two to add to my existing setup. Other manufacturers (I could only find one) only sold packs of four at a ridiculously high price. My Rhino Rack mounts and bar arrived within a few days of my order and appear very sturdy and well made. I bought them to add a third support for an awning and a solar shower on the roof of my van. I think I found the perfect solution.
This is my second Rhino-Rack. They go on very easily and hold the bikes/kayaks and even an extension ladder very well....thanks for a great product
As you can tell by the photo, they never came. Thank you [vendor] for having a tow hitch basket in stock. They saved the day as my other storage option did not arrive, even with the additional $$ paid for faster shipping.
Two items I received surprised me when I unpacked the box were the rails because they were not black like I saw in the picture, and the rubber insert that I am having a hard time sliding in the rail. Should this rubber insert have come already installed in the rail or is there a top on how to put in with ease?
Love the roof rack! Works great for ka yaks!
Instructions are not very clear, otherwise once you figure it out the install is easy.
Thanks to Etrailer, I am ready to do some serious summer exploring with my 2013 Mazda 3! Rhino Racks, Malone top box, and Kuat bike rack!
Fit great, this setup is great for going to a festival and car camping. Will hold a smittybilt RTT
Great product everything fit perfectly. With the heavy duty bars almost all the hardware for anything you put on the rack is too short
I got the roof rack mounted anyways. Better pics to come when it's all finished!
Usual fast delivery. Getting ready for camping season.
Thx
Needed the Rhino-Rack parts and they were delivered when promised. Great service.
Product Fit my 2018, Colorado, ZR2 perf ectly.
Thank you for the very speedy customer service! My roof rack is already here!
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.