To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.
Features:
Yakima CoreBars - 60" Long - Qty 2:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today in our 2016 Acura MDX, we'll be taking a look at and showing you how to install the Yakima roof rack system. This is going to consist of part numbers Y00426, those are going to be our Yakima JetStream crossbars, part number Y00146, those are our BaseLine towers, and part numbers Y06150, and Y06105. Those will be our BaseClip fit kits for our Acura MDX.The Yakima roof rack system is a great solution for carrying your vehicle accessories on your vehicle's naked roof, whether those are bike racks, cargo baskets, or ski and snowboard carriers. The Yakima JetStream crossbars are an aerodynamic crossbar that's going to help to reduce wind noise and drag.If we remove our end cap, you'll see our weather strip on the inside. This can easily be pushed down and used with channel-mounted accessories. So you don't have to worry about taking our weather strip out, or cutting it down.
Our Yakima BaseLine towers have a option to knock out this plastic portion here, and insert the same key system lock cores. That's going to allow us to prevent theft and tampering.When we remove our cover, you can see all the pieces that we need to use, and we have an included tool that's going to help to work down all of our bolts. The Yakima fit kit is going to be made specifically for our vehicle, which will give it a nice secure fit. It's also going to have rubber on any portion that might touch our vehicle, which will help to prevent scratches or abrasions.These bars measure 60 inches long, and the entire system has a 165-pound weight capacity, and a limited lifetime warranty. Now that we've gone over some features, we're going to show you how to get this installed.
I've gone ahead and put together one half of our crossbar. We're going to show you how to put together the rest, but everything you see here on our table is what's included.We're going to have our two covers for our BaseLine towers. We've got our BaseLine tower here. We've got our fit kit. This is going to be the two clamps that we'll use, the pad that we use for our fit kit as well, our end cap cover for our crossbar, our adapters for our crossbar, our included torque tool, and we've provided our own flat tape measure.To start off, we'll take our BaseLine tower.
We're going to take the plastic portion of our adapter, and we're going to secure that end to the top of our tower. That will snap right in. You want to make sure you hear those clicks. That's when we know we have it secure. We'll next take the metal portion.
We're going to place it right in the center. Holding it in place, we're going to flip our tower over.Inside you'll see two bolts. We're going to go for the one further back here. We'll take our included tool, and start to tighten that down. We want to make sure that the metal portion is even with the two plastic pieces on the top. The last thing we do before we actually load up our tower is we're going to take our pad, making sure that our arrow faces out, and we're going to snap it onto our tower. Again, you'll hear those audible clicks.Now, we've gone ahead and removed the weather strip on the underside of our crossbar. We want to remove this, and we can cut it down, and fit it in between our towers and on the outside edge between our towers and our crossbar end caps. That's going to help to reduce wind noise and drag, and any kind of whistling sound that might happen, but for demonstration purposes today, we're not going to use that.To load our tower onto our crossbar, we're going to line up the bottom portion that we installed into our channel here at the bottom. Now, you may need to loosen up that piece in the center, just slide our tower onto our crossbar, and we're going to set this at 42 and 3/8 inches. With that in place, we'll take our tool and tighten that down. Now we're ready to load this up onto our vehicle.We'll take our crossbar. We're going to set it on our roof. We'll just try and set it as evenly as possible. Now we'll take our crossbar end cap, and place that on, and we can measure out our crossbar spread. We'll measure out our crossbar spread. It'll be from the center of our front tower to the center of our back. That's going to be 32 inches. We do want to make sure that we move our crossbar evenly on each side.With that in place, we'll open up our doors. We want to lift up the cover here. We're going to insert our clamp, and make sure it attaches to our long bolt on the inside. We can start to tighten that down using our included tool, tightening up our bolt. You just want to make sure that that sits on our doorjamb, and we'll do the same thing to the other side.Once we hear the click of our tool, we'll know we have enough torque behind our bolt. Ready to close up our doors. Close up the gray cover here, and place on our tower covers. We'll fit on our bottom hooks first, and click it into place. Now we're ready to load up our accessories and hit the road. That's going to be our completed look at the Yakima roof rack system for our 2016 Acura MDX.
Average Customer Rating: 4.8 out of 5 stars (160 Customer Reviews)
These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.
From start to finish, the folks at etrailer -- and I spoke to several people there, so it was a consistent corporate vibe -- were fantastic to deal with.
There were delays in getting my product that were on the supplier side and out of eTrailer's control, yet etrailer folks kept me up to date and also worked on a customized solution.
My goal was to be able to carry my surfboard on the roof of our 2019 Hyundai Santa Fe to the beach more than 3 hours away. But the particular model we had had no existing racks, no recessed areas, nothing to fix racks to. Not even the dealer had a solution. I was sh*t out of luck.
But etrailer hooked me up. The racks did take me a while to put on, but most of that time was fine tuning to reduce “hum” while driving. I’m very happy with them.
Thanks to etrailer, I have gone surfing and can go surfing whenever I'd like to.
Excellent solution for my 2023 Chevy Silverado. In the past, I have had rails installed on the roof of my pickup trucks, but I find the BaseLine towers to be a better solution, since they don't permanently change the truck. Plus, they are much more solid than SkyLine system on the rails.
Love my Yakima roof rack!! It exceeds my expectations.great product. Also thank etrailer for the tec support! great staff always there to help thanks again!!
Follow the instructions, and you can't go wrong on the self installation
Your notice of schemes was a lot better than the yakima site provided. They did not suggest the scheme you did.
But when the products arrived, the instructions were by yakima. Generally worked as instructed except the tower to tower transverse mounting dimensions needed to be tweaked for a perfect fit.
Really easy to install & work as specified. So happy with the customer support/service at etrailer.
Ackage came 2 days early the install was somewhat easy (did it by myself)
Did not get to mount anything to it but seems really sturdy. One thing I can say is mark out your mounting points with provided stickers then put up and make adjustments to the roof rack.
We purchased the Yakima Skyline Towers roof rack with the Jet Stream crossbars. Took about 2 hours to install on the naked roof of our Flex. I drilled through the roof strip for the mounting bolts and they fit tighter than the factory rails. Very happy with our choice.
Item was as described and shipping was fast. Overall very satisfied with trailer. Will definitely order my stuff from them
Was skeptical at first because I needed the posts as well for my 2011 Honda Element. The Honda crossbars were not adequately weight rated and is why I opted for Yakima. Couldn't be happier with my choice as this assembly has served me well throughout the year.
Perfect. Perfect. Easy to install and high quality. Confident in this product. Excellent instructions. Used with towers of course! Towers and crossbars have demonstrated to be strong and durable with several trips with kayaks.
I ordered the wrong set up for my car, but the excellent customer service specialist set me up and expedited my roof rack that fit perfectly. I highly recommend calling and speaking with the knowledgeable staff about your needs. I'm super happy with the experience overall!
Solid build quality and easy installation on my '21 Mazda CX-5.
So far so good. Purchased these towers to use on a 2022 GMC Canyon with HD bars that I already had, primarily to carry my canoe. Yakima's fitting instructions worked perfectly and the whole system seems really solid.
Well packaged and on time
I have not bought car roof racks for decades--back when there were those very useful rain gutters. So I was shocked with the high prices. But what you get today is much more carefully engineered with a complicated construction. This Yakima version even comes with a manual 3.5 mm hex driver which turns out to be a torque wrench too. You use it 16 times, torquing to its limit, in installing the two cross rails on the four towers. Years ago you installed the towers where you wanted them on the rain gutters and adjusted the cross rails by sight. No more. You must go on line to Yakima. You must get the precisely engineered dimensions for your exact vehicle. You even adjust the towers for the roof slope and any toe-in of the roof line. Pay attention to the precise instructions. The result is very solid. I wish that I had more space between the cross rails. There is room for another 6 or 8 inches given where the door openings on my 2019 Toyota Highlander are spaced. But then the rear base clips would be different and that logistics would add yet more to the price. I am confident that I can secure a 4 X 8 sheet of plywood on the cross rails. And I will find my vehicle in the mall parking lot easier with those good looking rails. While I am happy with the end product, I wish the vendors had given more explanation of the fixed dimensions of today's installations. That would have helped make my on-line shopping less frustrating. Part of the problem is that Yakima and Thule do not provide cross rails for my LE Highlander's existing tower bases. And I could not get 60 inch cross rails on any of the versions that fit my LE's bases.
The roof rack has been awesome! It has been really handy to be able to attach our bike rack attachment, kayak bars or traveling cargo carrier. My only complaint is that the end caps fell off somewhere along one of our many adventures and looks a bit disheveled. Other than the appearance it has been very versatile and we love it!
I want to thank the staff at eTrailer for their outstanding support. After my roof rack order got off to a shaky start the customer service staff stepped in and made it right; 100% RIGHT. I cannot thank them, and eTrailer, enough. Regarding the roof rack itself, I have now installed it and can vouch that the installation was a breeze. All parts fit and the instructions were correct. For the record, this is not my first purchase from eTrailer (I've bought hitch items from them before) and it won't be my last. They have ALWAYS given great service, their web site works, their products and descriptions are good, etc., etc. Thank you!
Roof rack parts were ordered correctly and shipped quickly.
I waited several weeks for roof rack to arrive after ordering online. I am accustomed to Thule racks, but could not find any towers/bases to fit the 2019 Santa Fe. Once here, the Yakima rack mounted with ease and I look forward to hauling kayaks or basket on the roof.
Thank you etrailer.
The instructions were different for another set of bars. Was a pain to get right...all the measurements on Yakima were off...I figured it out on my own...should have got Thule or nicer bars ..end caps were not good either...flawed fit... otherwise will do just not happy with the product perse or instructions...delivery good...will see how they do.
Great product fast shipping
Great! Easy to install!
I did a lot of research before purchasing my roof rack. I came across this website and liked the prices, and after much thought, decided to get the Yakima CoreBar crossbars. I received my roof rack within a couple days of ordering! It's extremely sturdy and doesn't make hardly any wind noise. I love it and it looks great on my car, couldn't be happier with my purchase!!
The 60" CoreBar Crossbars will be much more useful to us than the original 50" bars placed on our shell at the factory. The only issue I had was that there were no instructions with the bars. It took a little while for me to figure out how the old bars came off and how to put the new ones on but I'll consider that a learning experience.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.