Erickson Ratchet Tie-Down Straps w/ S-Hooks - 1" x 10' - 300 lbs - Qty 4
(20 reviews)
Price: $18.43
In Stock
Erickson Ratchet Tie-Down Straps w/ S-Hooks - 1" x 10' - 300 lbs - Qty 4
Item # E01418
Retail:$43.86
Our Price: $18.43
You Save: 58%
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (20)
- Q & A (0)
- Photos
Erickson Ratchet Straps - E01418
- Manual
- 6 - 10 Feet Long
- S-Hooks
- 0 - 1 Inch Wide
- 176 - 350 lbs
- Erickson
- 4 Straps
- Trailer
- Truck Bed
These tie-down straps let you secure gear to your truck bed, trailer, or cargo carrier. Ratchet mechanisms make it easy to tighten the straps down over your load. And vinyl-coated S-hooks help prevent scratches on your cargo. 900 lbs Max load.
Features:
- Tie-down straps let you secure cargo in your truck bed or trailer or on your cargo carrier or roof rack
- Ratchet mechanisms make it easy to tighten down straps and maintain tension on straps
- Vinyl-coated S-hooks help prevent scratches on your gear
Specs:
- Strap dimensions: 1" wide x 10' long
- Safe working load limit (WLL): 300 lbs
- Maximum load (break strength): 900 lbs
- Quantity: 4 ratchet straps
Note: Tie-down straps must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the straps being used. For example, if you are using straps with a WLL of 500 lbs each to tie down a load weighing 1,000 lbs, then you need at least 2 straps to safely secure that load. It is recommended that you always use straps in pairs.
01418 Erickson Manufacturing Ratcheting Tie-Down Cargo Straps with Coated S-Hooks - 1" x 10' - 900 lbs Max Load - Qty 4
Customer Reviews
Erickson Ratchet Tie-Down Straps w/ S-Hooks - 1" x 10' - 300 lbs - Qty 4 - E01418
Average Customer Rating: 4.8 out of 5 stars (20 Customer Reviews)
These tie-down straps let you secure gear to your truck bed, trailer, or cargo carrier. Ratchet mechanisms make it easy to tighten the straps down over your load. And vinyl-coated S-hooks help prevent scratches on your cargo. 900 lbs Max load.by: Jeremy G04/09/2019
These are fine for the price. I purchased similar ones in the past, and the ratchets get hard to use once they've seen some wear and tear. So, these are good for light duty.
by: Gordon M01/18/2017
These are excellent for the price. Well made & simple to operate. Bought these to use in conjunction with the Darby extend a truck package to tie down our 2 kayaks & stabilize the rear rack.
by: Richard H11/08/2016
Excellent high grade product. Much better quality & strength than similiar tie down straps I purchased before. Excellent product!
Richard H
by: jason y07/23/2013
Incredibly fast and extremely polite. These guys seem eager to make sure that their customers are satisfied. The product came as described and all the price was great. These guys rock!
Not too much to say about Tie Downs. They work!
by: jdjoe05/12/2015
Better than average quality for comparable items. The personal service was and still is the best. I tell everyone look at etrailer first!
by: Pheng X06/11/2015
Works great for my camping trip. Had these trapped on to my cargo equipments on my cargo carrier.
by: Ron G07/01/2016
Quick shipping Unit was better than expected. Very well built nice product, Etrailer is AAA+
by: Chanda H03/03/2017
The straps work nicely.
by: BVP08/04/2015
Another great product from Erickson, Thank you for them!
by: fortin racing03/23/2017
have these for over a year now and they still work just like new. we spend a lot of time in the dirt and they are still working good.
by: Vladimir03/13/2018
I use it for fixing kayaks and they work as expected. Maybe could be longer.
by: Marty06/30/2016
Easy to use and held up well. Great product!
by: John06/15/2018
Good Quality, Good Price
by: jason d.02/21/2012
Good product. I like how the hooks are actually shaped like a hook, and not an "L".
by: Ron08/06/2014
very well built
by: Brian M. 04/13/2012
Great service, quick ship and receipt, good price and quality product.
by: Tim11/07/2017
Works great
by: Joel02/07/2018
The products worked out very nicely. r>
by: Tom H03/04/2011
The delivery was fast,the price was exceptional
by: Charles 07/03/2021
20
20
See what our Experts say about this Erickson Ratchet Straps
- Trailer Mounted Cargo Carrier for a GeneratorWe have the Stromberg Carlson Trailer Tray # CC-255 which mounts to the front of an A-frame trailer. It has a 300 pound capacity and weighs about 65 pounds. It is 32 inches wide and 20 inches deep overall. I have included a link to a video review for you. If you need some ratchet straps you can use # E01418 for a 4-pack.
view full answer... - Cargo Carrier Recommendation for a Pride Victory Scooter and Hitch for 2007 Suburu Outback WagonAs long as your 2007 Subaru Outback Wagon is not the Sport model, the Draw-Tite # 75560 will work well to carry your Pride Victory Sport Scooter. I have a brief installation video of this hitch on your vehicle. The Flint Hill Goods 30x50 Carrier # FHG77ZR has a 48 inch ramp and weighs 80-lbs. The combined weight of your scooter, complete with the batteries and the weight of the carrier is under the 400-lb rating that your hitch has. You will need to check your owner's manual to see verify...
view full answer... - Can I Haul a Large Grill With 24x60 Railed Cargo Carrier, part # 63153As long as you are not above the weight capacity of your trailer hitch, the recommended tongue weight of your tow vehicle, and the 24x60 Railed Cargo Carrier for 2 inch Trailer Hitches, part # 63135, of 500 lbs, you should be okay. You will want to to also attach your grill securely to the cargo carrier, I would recommend something such as a 10 foot Ratchet Tie Down with Coated Hooks, 900 lbs (Qty 4), part # E01418. As long as your grill is not extraordinarily tall the height should not...
view full answer... - Recommended Hitch-Mounted Cargo Carrier For Scooter That Is 28-1/2 Inches WideWe do have a hitch-mounted cargo carrier that would work for you. I recommend the Pro Series Steel Solo Cargo Carrier and Folding Ramp, part # PS10401-10402. This has a usable area that measures 47-3/4-inches long x 31-3/4-inches wide x 2-3/4-inches deep, and it has a ramp that measures 48-inches long and 31-1/2 inches wide. This carrier has a 400-lb weight capacity. To secure your scooter to the carrier I recommend tie-downs like part # E01418.
view full answer... - Draw-Tite # 75784 Hitch and Swagman XTC4 Bike Rack Compatibility on 2011 Acura RDXThe 2-inch Draw-Tite Hitch we offer for your 2011 Acura RDX is part # 75784 which has a rated tongue weight capacity of 400-lbs. You are correct that any extender/adapter used in this hitch will reduce its capacity by half. This means that your hitch-and-extender would have a tongue weight rating of only 200-lbs. Since the Swagman XTC4 4-Bike Carrier # S64665 itself weighs 59-lbs, your net load capacity for your bikes would be only 141-lbs. This 35-lbs-per-bike may be enough for your 4...
view full answer... - Availability of Pink Ratchet Straps for a Pink Tammy Wolf Racing BoatThe Ratchet Tie Down with Coated Hooks # E01418 do sort of look pink in the pictures but they are actually red like in the video I have linked for you. I would go with black, # EM34420, since pink is not available. Black is not going to clash with the aesthetics of the super sweet racing boat.
view full answer...
- Could Stromberg Carlson Trailer Tray Cargo Carrier # CC-255 Fit Generac 8000The shelf portion of the Stromberg Carlson Trailer Tray Cargo Carrier # CC-255 that you referenced measures 20 inches by 32 inches. The dimensions I was able to find for your Generac 8000 are 28 inches in length and 25.5 inches in width. What you can do is install the tray of this upside down so that it does not have ledges and the width of your generator could overhang. You'd have to really secure the generator though since the tires would overhang. We have the part # E01418 which is...
view full answer...
- Best Way to Carry Generator When Towing CamperThe Stromberg Bunk Adapter part # CC-255 is a great solution for what you are looking for. This attaches to the frame members of your camper and gives you a platform up above the propane tanks to carry a generator. I attached a picture of this installed an carrying a generator as well as a review video for more info for you to check out as well. For tie downs we also have the part # E01418 as well.
view full answer...
- Solution for Transporting Waste Cart Between Tow Vehicle and TrailerI may have a solution for you, however the Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier # CC-275 referenced in your question is designed only to hold a 2 inch, RV approved bike rack. I cannot recommend using this for any other application as it will likely void the manufacturer warranty and may not be safe. I instead recommend taking a look at the Stromberg Carlson Trailer Tray Cargo Carrier # CC-255. This has a similar design to the bike rack carrier you were looking...
view full answer... - Is etrailer Motorcycle Carrier Compatible with 2.5 inch Hitch AdapterThe etrailer Motorcycle Carrier # K2TMC201 that you referenced is compatible with a 2-1/2 inch hitch that has a 2 inch hitch sleeve installed. This could cause some additional movement that would depend on the clearance between the adapter and the hitch. For ratchet straps then the part # E01418 would be a great option.
view full answer... - Hitch-Mount Cargo Carrier to Transport Lawn Mower on 2006 Honda Accord with Class I HitchHitch receivers and the accessory items that they can carry (cargo carriers, bike racks, etc) all have Class ratings to designate their general capacity and size. The linked article will explain. Class I hitches are a 1-1/4-inch size and are suited for light-duty applications. All of the hitches offered for the Honda Accord can be seen on the link provided; all are 1-1/4-inch Class I receivers rated for a maximum downward force (tongue weight) of 200-lbs. This tongue weight figure means...
view full answer... - Can Stromberg Carlson Cargo Carrier for A-Frame Trailers # CC-255 Hold Honda EX3300S GeneratorAccording to the online owners manual for the Honda EX3300S generator its outside dimensions are 35.8 long x 20.9 wide x 27.4 inches tall. It has a dry weight spec of 240-lbs, which is within the 300-lb capacity of the Stromberg Carlson cargo tray. I pulled a sample from our warehouse and took measurements of the tray portion; these various dimensions are indicated on the photo provided. The tray measures 20 x 32-inches so its a bit too small for the generator but may still be useful to...
view full answer...
- How to Secure Portable Generator to Trailer A-FrameYou can try fitting the Stromberg Carlson Trailer Tray Cargo Carrier # CC-255 sideways but it wasn't designed to be installed that way so I recommend installing it the correct way and routing your wiring to it that way. This will fit A-Frames that are 12" - 52" wide and frame height of 3-1/2" - 6-1/2". As long as your A-Frame fits within these specs it will fit just fine. You can secure the portable generator to the platform using straps like the Erickson Ratchet Tie-Down Straps # E01418...
view full answer...
- Where to Secure Bikes with Ratchet Straps When Using Swagman RV Bike Rack Part # S80605The Swagman Motorhome Bumper 2-Bike Carrier, part # S80605, is intended for use on 4- to 4-1/2-inch continuous-weld steel RV bumpers (not aluminum or spot-welded bumpers) and can carry two conventional bikes of similar length. This carrier is made for use with typical pedal bikes, but not tandem, motorized or specialty-downhill bikes which can be much heavier. The carrier total rated weight capacity is 70 lbs. The installation instructions are included for your review. The two bikes should...
view full answer... - Using Trailer Mounted Tray Cargo Carrier CC-255 for Honda 3kw Generator on Bigfoot 21I agree with you. Having the Honda generator mounted on the actual trailer would be better than a basket or other device. Using the Trailer Tray Cargo Carrier, # CC-255, is an excellent option. This carrier has a 300 pound weight capacity and the tray measures 32 inches long by 20 inches wide. Provided the generator can fit those dimensions and weight capacity this would be a good option. Please note that having the generator mounted at the front of the trailer will increase the tongue...
view full answer... - Recommended Cargo Bag for Use with MaxxTow 17 x 50 Hitch Cargo Carrier MT70107Thank you for your purchase from etrailer of the MaxxTow Hitch Cargo Carrier MT70107. Carpod offers a weather resistent soft cargo bag # M2202 that will work well on your carrier. You can see this item in the linked video. We also offer ratcheting strap sets like Erickson # E01418 to help keep the bag secured to the cargo carrier.
view full answer... - Hitch for 2001 Ford Expedition XLT to Allow Use of Slide-Out Cargo Carrier H01472Draw-Tite Ultra Frame Class IV Trailer Hitch Receiver # 41920 is a custom-fit 2-inch hitch made specifically for the Ford F-150 and F-250 light-duty pickups and so it does not fit your 2001 Ford Expedition XLT. We offer a 2-inch Class III hitch made for your vehicle that appears on the linked page. The Curt hitch # C13049 isa USA-made hitch that has a 600-lb tongue weight rating and installs without drilling using an included hardware kit. Curt warranty policy requires you to use support...
view full answer...
Do you have a question about this Ratchet Strap?
Info for this part was:
Updated by:
Leah B
Video Edited:
Zack K
Installed by:
Matthew K
Installed by:
Cole B
Video by:
Alan C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.