Can Stromberg Carlson Cargo Carrier for A-Frame Trailers # CC-255 Hold Honda EX3300S Generator

Question:

Iam looking at purchasing the cc-250 for my toy hauler and would like to set on top a honda ex 3300 s..What is the meassurement across the front to the angles. honda ex 3300s 31 1/4 wide x 21 deep x 25 1/4 tall at the wheels is 29 x 20

asked by: Adam B

Helpful Expert Reply:

According to the online owners manual for the Honda EX3300S generator its outside dimensions are 35.8 long x 20.9 wide x 27.4 inches tall. It has a dry weight spec of 240-lbs, which is within the 300-lb capacity of the Stromberg Carlson cargo tray.

I pulled a sample from our warehouse and took measurements of the tray portion; these various dimensions are indicated on the photo provided. The tray measures 20 x 32-inches so its a bit too small for the generator but may still be useful to you for other applications.

This unit clamps to your A-frame trailer with included hardware and provides 29-inches of clearance above the trailer frame. Four welded-on tie-down points provide a handy means to secure your loaded cargo. If you need cargo straps we offer, for example, a set of four ratcheting straps from Erickson, part # E01418.

Once fully loaded with your generator and/or other cargo you may notice a slight change to the handling characteristics of your trailer as a result of the increased tongue weight and higher center of gravity at the trailer nose.

expert reply by: Adam R