bing tracking image
  1. RV and Camper Bike Racks
  2. Swagman
  3. RV Bumper Rack
  4. Motorhome
  5. Travel Trailer
  6. Fifth Wheel
RV Bumper 2 Bike Rack

RV Bumper 2 Bike Rack

Item # S80605
Retail:$161.28
Our Price: $107.88
You Save: $53.40
RV and Camper Bike Racks
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Videos

Need help with installation?
Locate installers near me
The best technical support and full rv and camper bike racks installation instructions. Great price Durango Fifth Wheel rv and camper bike racks and expert service. K-Z Durango Fifth Wheel, 2012 rv and camper bike racks by Swagman are available from etrailer.com. For expert service call 1-800-940-8924 to order your RV Bumper 2 Bike Rack part number S80605, or order online at etrailer.com.
  • All Info
  • Reviews (67)
  • Q & A (0)
  • Photos

Swagman RV and Camper Bike Racks - S80605

  • RV Bumper Rack
  • Motorhome
  • Travel Trailer
  • Fifth Wheel
  • 2 Bikes
  • Mountain Bikes
  • Road Bikes
  • Womens Bikes
  • Platform Rack
  • Swagman

The popular wheel mounted bike rack is now available for your RV bumper! Simply secure the steel U-Bolts provided with the rack to your bumper. The upright bar in the center of the rack gives added support to your bikes while towing.


Features:

  • Carries up to 2 bikes (30 lbs per bike)
  • Steel construction
  • Tire rails support several sizes of wheels and frames
    • However, both bikes need to be of similar length
  • Upright bars add additional support for bikes
  • Powder-coated to resist corrosion


Specs:

  • Built for continuous welded steel square bumpers at least 4" and no more than 4-1/2" wide
    • Not for use on aluminum or spot welded bumpers
  • First bike sits 6-1/4" out from bumper
  • Each platform: 20" O.D.
    • Extends 19" out from bumper
  • Upright bar: 19-1/2" high
  • Wheel Loops width: 2-3/4"
  • Limited lifetime warranty


This reliable mount rack is constructed with steel and carries up to two bikes. Built for 4" to 4-1/2" continuous welded steel square bumpers, this rack is simple to attach and easy to use. The tire rails support several sizes of frames and wheels.



80605 Swagman RV 2-Bike RV Bumper Mount Rack

Installation Details S80605 Installation instructions

Customer Satisfaction Score:


Customer Reviews

RV Bumper 2 Bike Rack - S80605

Average Customer Rating:  4.4 out of 5 stars   (67 Customer Reviews)

The popular wheel mounted bike rack is now available for your RV bumper! Simply secure the steel U-Bolts provided with the rack to your bumper. The upright bar in the center of the rack gives added support to your bikes while towing.

by:

The bicycle rack mounted easily by myself without help from another person. It is very strong and holds our two bicycles just as I had hoped. I slipped a pool noodle over the upright support bar to prevent scratching the inside bicycle. The only thing I can suggest is that the product would have been better if it included the cover for the upright support pole and some strapping material to keep the bicycles solidly in place while traveling. The strapping material is not a big priority for me though because I have lots of it.



by:

This was a great compromise in cost, ease of install and use.

Easily attached to the bumper (and saved cost as I didn't need to install a hitch on the RV).

Bikes went in well, but needed to use pool noodles to insulate the bikes from each other and from the central pole. (Will switch to more sturdy pipe insulation next time). Add some bungies and velcro straps (to hold the wheels) and you're all set.

Held our 2 mountain bikes flawlessly over our 8,000 mile road trip last summer.



by:

It's been just over a year tha I purchased my Swagman two-bike rack for my 5th wheel. The customer service I received form "etrailer" was exemplary. I had questions about the size and my CSR actually called the manufacturer got the answer and called me back! The rack was an easy mount requiring one wrench, two hands and about ten minutes. It's sturdy, looks great and functions flaulessly! Although it isn't a suggested procedure, at 265 pounds I stand on mine to wash my back window. Of course I stand close to the bumper and not on the outter edge, but my point is, it's a very sturdy unit and is at a great price point. If you need a rack look no further than, etrailer and Swagman!

Steve

3/15/2019

Ive sold my 5th wheel and the bike rack but the new owner loved the rack. My experience with the rack is I cant imagine a rack being easier to install, more sturdy for the price point or in general a great piece of equipment.



by:

Cannot slide the two sections far enough apart so that both bike wheels will fit into their respective slot. When mounted the ends of the rack stick past the bumper on the vehicle side too far. This means that the ends are sticking into the cut out for the RV back wall above the tow hitch which limits moving the sections further apart. Also an improvement could be made by having a hinge that would allow for lifting the rack in an upright storage position.

Etrailer Expert

Jenny N.

7/28/2023

It is possible that this might not be the bike rack for you. How wide are your tires? Would you be able to send a picture of your bikes on the rack?



by:

Bike rack was exactly how it appears. Quality material of construction for what it is. Total time to assemble, about 20 minutes. Had a question about shipping time, got a quick response from George at etrailer. Bike rack actually came in earlier than scheduled date.



by:

Always the first place to go.



by:

Nice rack for the money, easy install, looks good on the rear bumper of the motor home. One item of caution....be sure that when performing a sharp turn in the motor home, that the bike rack does not hit the tow vehicle if in fact a vehicle is in tow. I checked this for clearance before I went on the road



by:

So far so good, using it to mount a generator to the rear bumper of our 5th wheel. Have not had her on the road yet, so I'm not sure how it will hold up. It feels very secure so I'm feeling good that it will hold up.

Bill

12/14/2020

Bike rack working great,Ive been using it as a generator platform on the rear of my 5th wheel.



by:

I ask for information on the bike racks that would fit my rv and they answered all my questions. My order arrived sooner than I thought and I installed it last nite and it will work fine. I am planning on sending pictures.

Thanks to all

Eric K.

6/2/2017

The rack is great, just what I wanted. I recommend this to all the campers I meet with bikes.



by:

It is a beautiful piece of equipment ever made to transport bikes on the rear of a rv



by:

Great price for a simple but effective bike rack. Have used it on the back of a 5th wheel RV, and overall it works well. Installation was very easy, be sure to adjust the position of the two pieces to fit your bicycle footprint. I just used some creative bungee cording to hold the bikes in place at the wheels and to the vertical pipe. The bikes are held firmly in place with very little movement.

My only real issue is with the vertical support, and its lack of adjustability. In my case, the bikes would lean towards the RV, with the handlebar hitting the glass window because it was so close. I attached a 2x4 spacer to the vertical support to position the inside bike straight up, and that took care of the issue, but it would be nice if there was some way of adjusting the bar.

Also, kudos to etrailer, for their great support. Delivery came early, and product was in great shape. I've used Etrailer before, and will continue to.



by:

Everything went great from the git go, the rack was at my front door the day I was told that it would arrive. The installation was a snap; it took about 15 minutes to complete, the only tool you need is a 9/16" wrench. The loading of the bikes are quick and easy, much better than hauling them in the bed of the pick up, which took a lot of time trying to strap them so they would not get damaged during the trip. Today was my first trip with the bike rack, I hauled 2 mountain bikes for 75 miles with no problem or damage to the bikes. Great product!



by:

I bought not as a bike rack, but as a platform to bolt a couple large storage contains on the back of my camper. My regular hitch style bike rack fits right between...worked great. I've been using it for one year now...no problems.



by:

I can’t really offer much on this as we haven’t used it. We were told the camper bumper isn’t strong enough to hold the weight. It will require some additional welding to the frame. Wish we had waited to purchase this unfortunately.

Etrailer Expert

Katrina B.

7/19/2022

This rack is built for continuous welded steel square bumpers at least 4 inches and no more than 4.5 inches wide. This is not built for use on aluminum or spot weld bumpers. We do recommend checking with your trailer manufacturer to make sure that the factory bumper can support the weight of a loaded rack. This rack has a weight capacity of 70 lbs and the rack itself is roughly 20 lbs. If you are looking for something that does not require additional welding, then you might want to look into getting a universal hitch, like part # C13701, along with an RV rated bike rack, like part # S44FR.

Etrailer Expert

Katrina B.

7/25/2022

This rack is built for continuous welded steel square bumpers at least 4 inches and no more than 4.5 inches wide. This is not built for use on aluminum or spot weld bumpers. We do recommend checking with your trailer manufacturer to make sure that the factory bumper can support the weight of a loaded rack. This rack has a weight capacity of 70 lbs and the rack itself is roughly 20 lbs. If you are looking for something that does not require additional welding, then you might want to look into getting a universal hitch, like part # C13701, along with an RV rated bike rack, like part # S44FR.



by:

I recently purchased the RV Bumper 2 bikeRack from etrailer.com. I received my purchase in a timely fashion and found the item to be well made and easy to install on the back of my View Finder travel trailer. I used it for the first time this past week to transport my wife's and my own mountain bike on our scheduled getaway to Astoria. It functioned flawlessly. The bikes were easy to load and unload and were secure during transport. I strongly recommend this product.



by:

Bike Rack arrived in minimum time and was exactly as described. Have not installed yet, since I need to relocate the spare tire on my camper. I will use it in the same area as the spare tire.

Peggy S.

10/22/2014

where are you going to put the spare tire

Ted N.

10/23/2014

I have now used the bike rack for two years. Many people have asked about it. I had my dealer move my spare tire underneath my fifth wheel behind the front battery storage area. He added a cable hook up to lower and raise the spare tire. Very similar to how spare tires are mounted in trucks. He did it for less than $100 .



by:

Excellent product. Easy to install. Very fast service from etrailer.com.

Roger H.

7/28/2017

Great product! Holds the bike well. I never concern myself with the safety of the bikes while using this rack.



by:

Fits and holds bikes very well, 4 inch bumper - they need to add more support for the upright bikes, they hit rear of trailer.

John A.

3/20/2014

I agree, they should include two uprights. I ordered a 2nd one from Skagman, around 30 bucks with shipping.



by:

Ordered the bike rack on a Tuesday afternoon, UPS delivered the rack the following Thursday morning. The quality of the frame work is very sturdy. Excellent product. We installed the bike rack with no problem. I had looked for several months for an rv bumper bike rack and could not find one that we thought we would like or would work very well. My husband ran across this web site as he looked for a rack. We are very pleased......and gald we ordered from etrailer.com. We will do business again with them if ever needed. Could not take pictures, as I do not have a cell phone that can do that. Still old school......



by:

A total piece of junk! Does not secure even one bike to the rack. If you used this product your bikes would not be there when you stopped. I wasted my money.



by:

I am very well pleased with my purchase of the 2 bike rack, It was easy to install. Just what I was looking for. The rack allowed me to free up that space in the back of the truck. Ordering was easy, and delivery was quick. Thank you.



by:

Seems like a great product. Easy to install with just a few basic hand tools. I had my 6 yr old daughter help me hold them in place while putting the U-bolt through but could be done with just one person. These are a little tricky if you have the rear bumper mounted tire carrier.



by:

We put a bike and ramps on there to go from ct to fl worked great! Sturdy. Thanks



by:

This bike rack has great flexibility for any size bike. It could use some eye bolts for tie-downs, but it assembled easily.



by:

Clamped easily to the back bumper of my camper and holds my 2 bikes securely with very little to no movement while driving (wife following me).


25
67
Show More Reviews

See what our Experts say about this Swagman RV and Camper Bike Racks

  • Best Way to Carry E-Bikes on Travel Trailer with 4" Bumper
    While the Swagman Bumper Mount Racks, parts # S80600 and # S80605, do give you some mounting options, these are designed for lighter 30 lb bikes so the bars that hold the bikes up aren't really designed for heavier 60 lb e-bikes. Since this is the case I recommend going with a different setup. For your application I recommend installing the etrailer RV Bumper 2" Trailer Hitch Receiver # e38HR and then using the Swagman E-Spec Bike Rack # S94FR and swapping out the standard trays to the...
    view full answer...
  • Will the 2 Bike RV Bumper Rack Fit on a 30 ft. 2010 Salem Travel Trailer with Left Side Spare
    You will have to do some measuring to determine if the bikes will fit without extending past the side of your trailer. Each of the rack bases has an overall width of 20 inches. You can use that measurement along with your bikes and check at the back of the trailer for proper fit and clearance of the spare while not extending past the side of the camper. We have other options if this rack will not work for you. I have posted a link below to our RV and Camper Bike Racks page for your...
    view full answer...
  • Will this RV Bumber 2 Bike Rack, part # S80605, Obstruct the Visibility of my RV Tail Lights
    If you used the RV Bumper 2 Bike Rack, part # S80605, there is a chance that your tail lights would shine through the spokes of the wheel allowing them to be visible, and therefore safe and legal. What I would recommend you do, is hitch up your trailer to your towing vehicle and have a friend hold a bike with the bottom of the wheels as high as the top of your bumper to simulate where the bike would be if you had this rack mounted with bikes on it. Next, have another friend activate your...
    view full answer...
  • Width Of The Swagman RV Bumper 2 Bike Rack
    I went to the warehouse to measure Swagman RV Bumper 2 Bike Rack part # S80605 and both sides of the rack measures 20 inches wide.
    view full answer...
  • Will a Bike Loaded on Swagman RV Bumper Mount Bike Carrier Make Contact with Back of Camper
    The first bike sits 6-1/4 inches from the rear most part of the bumper. Then another couple of inches to the center of the first wheel cradle. And you would have to add the width of the bumper and the distance, if any, from the forward edge of the bumper to the body of the trailer. So let's say that the bumper starts 2 inches from the back of the camper, the bumper is 4 inches, and the center of the bike is 9 inches from the bumper. Add it all up and you get 15 inches. If the bike width...
    view full answer...
  • Will the Swagman RV Bumper Bike Rack Part # S80605 Clear my Spare Tire
    Once installed to a 4 or 4-1/2 inch continuously welded steel bumper, the Swagman RV Bumper Bike Rack would extend 19 inches beyond the bumper. The first bike wheel would sit 6-1/2 inches rearward of the bumper. If you take some measurements to determine how the spare tire sits in relation to the bumper, you should be able to determine if the Swagman RV Bumper Bike Rack will work for you.
    view full answer...
    Image 1 for
  • How to Determine If Swagman RV 2-Bike RV Bumper Mount Rack is Right For Your Application
    Many RV bumper manufacturers construct their product with a plastic cap or a hinged door instead of endcap, allowing bumper to be used for storage; apparently you have this type. Open that end piece to examine if the seam has spot welds (short welds at a number of separate points) or one continuous weld running the full length of the bumper; take note of the thickness of the metal while doing so. Some bumpers, frequently identified as heavy duty, will not have a weld seam at all but are...
    view full answer...
    Image 1 for
  • 5th Wheel RV Approved Bike Rack For Weight of Electric Bike
    My suggestion is the Curt Adjustable Hitch # 13703 along with a trailer/RV approved bike rack. The Curt hitch will mount to any box frame, C-channel frame, or I-beam frame that is between 22 inches and 72 inches wide. The included hardware can be used to bolt the hitch to the trailer or it can be welded on for a no-drill application. I have attached an installation video that you can use for reference. The Swagman E-Spec Bike Rack for 2 Electric Bikes, # S94FR is one of the few 5th wheel...
    view full answer...
    Image 1 for
  • Front Hitch for 2016 Mercedes-Benz Sprinter 3500
    A front htich is a great way to add carrying capacity for a bike rack without interfering with turning clearance if you also happen to be towing a trailer. Currently the only front hitch we have for the 2016 Mercedes-Benz Sprinter 3500 is the EcoHitch model # 306-X7352. The hitch's price reflects the fact that it is USA-made and also made from an alloy that is produced only from US-sourced recycled materials. If you do not have a rear hitch we do offer these for your Sprinter 3500 as...
    view full answer...
  • Recommendation for RV Bike Rack for Tandem Bike
    For the tandem bike, I suggest the RV Bumper 2 Bike Rack, # S80605 by Swagman. This bike rack uses U-bolts to attach to the bumper of your RV. Bumper needs to be at least 4" and no more than 4-1/2" wide and will carry up to 2 bikes (30 lbs per bike). But suspect that would then be too far apart for the mountain bike. I don't have a solution that will handle both bikes in one bike rack.
    view full answer...
  • Recommendations for Carrying Bikes While Towing Trailer With Short A-Frame Tongue
    The Malone # MPG544 you'd referenced has a 400 lb tongue weight capacity, which wouldn't be enough capacity for the trailer's tongue weight and the weight of the bikes and the rack they're carried on. Couple that with the fact that using a dual hitch adapter like # MPG544 will reduce the tongue weight capacity of your Expedition's hitch by 50 percent, carrying the bikes between the trailer and the vehicle very likely wouldn't work. This leaves a couple of options for carrying your bikes....
    view full answer...
  • Can the RV Bumper 2 Bike Rack Be Used Around a Spare Tire on a 20 Foot Jayflight Travel Trailer
    The RV bumper bike rack # S80605 would be a great choice for your tent trailer, because it offers an easy install and will accept many different styles of bikes. As long as your spare tire does not extend past the face of the rear bumper on the trailer you should have no problems mounting the carrier and installing your bikes. This bike rack is made for continuous welded steel square bumpers at least 4 inches and no more than 4-1/2 inches wide. The only thing you should note is that the...
    view full answer...
  • Will a Bike with 2-3/8 inch Wide Tires Fit the Swagman Bike Rack S80605
    Yes, your bike tires that are 2-3/8 inches wide would fit well on the Swagman Bike Rack part # S80605. The slots on this rack are 2-3/4 inches wide so yours would fit easily.
    view full answer...
  • Recommended Bike Carrier for the Back of a 2009 Coleman Highlander Tent Trailer
    RV bumper bike rack # S80605 would be a great choice for your tent trailer, because it offers an easy install and will accept many different styles of bikes. This bike rack is made for continuous welded steel square bumpers at least 4 inches and no more than 4-1/2 inches wide. The only thing you should note is that the 2 bikes would both need to be similar lengths, as the wheel loops on the bike rack are connected to each other. If you need room for your spare tire, you could also use...
    view full answer...
  • How are Bikes to Be Mounted to the Swagman RV Platform Rack Part S80605
    The Swagman RV Bumper Rack, part # S80605, is designed to be used with ratchet straps or some sort of tie-down. There is not any sort of clamp system that is supposed to be used on the upright. It is there to provide another location for using which ever tie downs work best for you.
    view full answer...
  • How Much Does the RV Bumper 2 Bike Rack # S80605 Weigh
    The shipping weight of the RV Bumper 2 Bike Rack, part # S80605 is 25 pounds, so the rack will weigh slightly less without the shipping packaging.
    view full answer...
  • Bumper Bike Rack Solution for 2015 Jayco X20E Hybrid Camper
    Hey Charles, so the reason the RV Bumper Bike part # S80605 that you referenced requires 2 inches between the bottom of the trailer body and the top of the bumper is to clear the mounting hardware. So if you are sure you don't have that clearance you wouldn't be able to install the rack. You could possibly modify the body to gain the clearance or a bumper hitch like the part # E-100 with an RV bike rack like the # S36FR could work too.
    view full answer...
  • Bike Rack to Carry Tandem Bike at Rear of RV
    The only solution we have for carrying a tandem bike at the rear of an RV would be the RV bumper bike rack part # S80605. Only issue you'd have would be that to space the rack to allow a tandem bike to fit would be too far for a standard bike to be carried as well. I attached an install video for this for you to check out as well.
    view full answer...
  • RV Bumper Mount Rack and the 24x60 etrailer Cargo Carrier for RV Bumper
    For the Lippert Components flip down version of added storage the # LC243621 is the only option currently available from our supplier. However, we do have other options of RV bumper bike rack/storage available, such as the # S80605 & the # S80600. These are each built for 4" to 4-1/2" continuous welded steel square bumpers. They are not a fold-up version but work well if you are looking for a bike rack that can also be used to strap extra cargo to. If however you are more interested...
    view full answer...
  • Dolly Towing a Vehicle and Carrying Bikes at the Same Time with a Motorhome
    There are no adapters with dual receivers for 2-1/2 inch hitches that would work for this specific application. But there are other ways to carry bikes on the back of your motorhome. For example if your motorhome has a 4 to 4-1/2 square, steel, fully welded bumper you could use # S64663, # S80605, or # S80501. I have linked videos of all 3 of these bike racks for you. Another option, if your motorhome has a ladder in the back, is to use a ladder mounted rack such as # LA-102, or # SP501BR....
    view full answer...
  • Bike Rack Recommendations for Use Behind a 27 Foot 2005 Hornet Trailer Pulled by a Ford F-150
    I have a few possible solutions for you. First, if your 2005 Hornet trailer has a trailer hitch, I recommend the Swagman XC, # S64650. This is a platform style rack rated for use behind a trailer. The bikes are secured at the two wheels and the frame for maximum stability. I have included a link to the installation details and a video review of this rack below. If you do not have a hitch and want to use a hitch mount rack, you can install a hitch. I have included a link to our specialty...
    view full answer...
  • Suggestions for 2021 R-pod 202 Bike Rack
    I suggest not mounting to the back because of the added amount of movement and torque that the bike rack would receive. The Stromberg Carlson Bike Bunk Carrier for A-Frame Trailers, # CC-275, is not designed for that. Instead, I suggest the JHitch-It 2 Bike Rack for Straight Tongue Trailers, # LC731138. I don't know if your R-pod has a solid enough rear bumper or the dimensions needed for the Curt RV Bumper 2" Trailer Hitch Receiver, # E-100. This is a bumper mounted hitch intended...
    view full answer...
  • Availability of 2 Bike Rack on 21 foot Big Foot Travel Trailer with RV Ladder
    For your 21 foot Big Foot Travel Trailer I recommend a Swagman RV bumper 2 Bike Rack, # S80605, if you have a 4 to 4-1/2 inch welded steel square bumper. After checking with Surco, The Ladder Mounted 2 Bike Carrier, # SP501BR, is 9-1/4 inches wide at the top which would fit the ladder on your trailer.
    view full answer...
  • RV Bumper Bike Rack Recommendation for a 2016 Jayco Jay Flight SLX 267BHSW
    For a bike rack that will fit your bumper and fit around your rear spare you would want the Swagman part # S80501. This would be perfect for your two bikes and wouldn't cause any issues getting around the spare. The weight capacity for the rack is also 70 lbs for two bikes. You would have to contact Jayco to determine if the bumper has enough capacity. But if the bumper is a square bumper 4 inch or 4-1/2 inch that is continuously welded this will fit and work well.
    view full answer...


< Previous
123. . .4



Do you have a question about this RV and Camper Bike Rack?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Sarah L
Expert Research:
Sarah L
Employee Robert G
Expert Research:
Robert G
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Reno H
Expert Research:
Reno H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Lori W
Expert Research:
Lori W
Employee Zack K
Video Edited:
Zack K
Employee Chris R
Video Edited:
Chris R
Employee Matthew K
Installed by:
Matthew K
Employee Adam E
Installed by:
Adam E
Employee Dustin K
Video by:
Dustin K
Employee Wilson B
Updated by:
Wilson B
Employee Matthew S
Updated by:
Matthew S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.