Replacement Gear Motor Assembly for Slide-Out Motor Assembly

Video Transcript for Review of Lippert Components RV Exterior - Replacement Slide Out Motor - LC385964

Hey everyone, I'm Ellen here at etrailer.com. Today, we're gonna take a look at the Replacement Gear Motor Assembly. This is going to work for your Lippert Components Slide-Out Assembly, part number 524908. This is going to replace that whole motor piece to get you back out on the road and functioning properly with your slide-out.It does have the wiring harness here, so we can just plug that into our existing system and get our electrical connection made. We'll have our brake switch here to manually release that if we ever need to, but it does need to be engaged before you actually go in transit. Just gonna help you to get the cylinder here lined up with everything so you can get everything put in place properly.I'm gonna give you a couple measurements just for reference.

So if we go from the bottom of these posts here, where they have the threads installed or the threads made, it's about nine and . excuse me, about eight and three-quarter inches long. And then the base is about three and seven-eighths inches wide. The diameter of this cylinder here is about three quarters of an inch. It sticks out from the housing, kind of going from that same position back, it's about an inch and a half that it goes out, so from here to there.

Our wiring coming off of the cylinder is about six inches of wire before it actually comes to that plug.That's pretty much gonna do it for our look at the Replacement Gear Motor Assembly for your slide-out assembly on your Lippert Components Slide-Out Assembly. If you need any other replacement parts for any part of your RV, you can always turn to etrailer.com. We've got a lot of information and a lot of different reparts 00:01:55 to get you back out and enjoying your adventure. Thanks for watching, and we'll see you next time..