SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 9" Round Jack Feet - Qty 4
(4348 reviews)
Price: $129.95
In Stock
SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 9" Round Jack Feet - Qty 4
Item # SP54FR4
Retail:$191.80
Our Price: $129.95
You Save: $61.85
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (4348)
- Q & A (0)
- Photos
SnapPad RV Jack Pads - SP54FR4
- 9 Inch Jack Foot
- Round Foot
- SnapPad
- 4 Jack Pads
Perfect for fifth wheels and motorhomes with Lippert leveling systems, these rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area adds extra stability on soft ground. Includes (4) pads.
Features:
- Heavy-duty rubber pads snap onto your 5th wheel or Class A, B, or C motorhome's Lippert leveling jacks to make leveling faster and easier
- Eliminates the need to crawl under your motorhome to position plastic pads or wood blocks
- Increased surface area of your leveling jack's feet provides added support for your motorhome
- Prevents sinking into soft ground, unlike smaller metal feet
- Durable, heavy-duty rubber is made from recycled tires
- Grips uneven terrain and prevents metal feet from rusting or bending
- Serves as a cushion so metal feet won't crack or chip your driveway
- Helps dampen vibration from inside motorhome that could cause shifting
- Built-in drains release moisture to prevent jack feet from corroding
- Simple, one-time installation
- Line up the pads beneath the jack feet and lower each foot until the lip on the pad fully engages and locks in place
- No need to remove and replace pads or carry other jack pads or blocks around with you
- Made in USA
Specs:
- Application: 5th-wheel campers and Class A, B, and C motorhomes (see chart below) with Lippert leveling systems and (4) 9" round jack feet
- Dimensions: 11" long x 11" wide x 2" tall
- 2-Year limited warranty
Check the listings below for some of the most common rigs that are compatible with this system. Note: You will need to measure your jacks to confirm compatibility, as the foot size/shape of the jacks on your leveling system can vary from model to model and year to year.
Simple, One-Time Installation
SnapPads install quickly and easily, and never need to be removed. Install each pad one at a time. Begin by placing the pad beneath your jack, ensuring that the pad and foot are properly aligned.
Lower the jack until the lip of the pad fully engages around its foot and locks into place. You'll hear a snapping sound once the pad is securely installed. Repeat this process for the remaining pads. Installation is permanent, so once you have the SnapPads secured, you'll never have to worry about crawling under your RV to place pads again.
XTRSP4 Snap Pad XTRA Jack Stand Pads for RV - 9" Round Jack Feet - Qty 4
Installation Details
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Too difficult to install
Customer Reviews
SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 9" Round Jack Feet - Qty 4 - SP54FR4
Average Customer Rating: 4.8 out of 5 stars (4347 Customer Reviews)
Perfect for fifth wheels and motorhomes with Lippert leveling systems, these rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area adds extra stability on soft ground. Includes (4) pads.by: Bruce05/12/2023
I had seen a camper with the pads on the jacks and thought they were a good idea. I received mine and had them on in less than 10 minutes. I am very pleased with them. "Thanks etrailer"
by: Carol11/22/2022
The snap pads are great! They were easy to in stall, and and add stability. Great product. Everything we have bought for our RV at etrailer has been a quality product!
Carol
11/24/2023
They are great!! They have stayed on, and a lot better for your leveling Jacks. Great investment!!
Mike L.
11/25/2023
@Carol We're glad your SnapPads are working well for you!
by: Ted05/12/2023
I've had Snap Pads on my Class A motorhome for over 2 years, and have installed them on 4 friends' Class A's.
Recently bought a set from etrailer for another friend and just installed them on his Class C. They make setup and breakdown much easier for all of us and we wouldn't go back to standard jack pads.
My recent purchase on etrailer was simple with quick delivery and the price was better than either Amazon or direct from Snap Pad.
Ted
5/13/2024
Now 3 years with my Snap Pads and still love them! So do the 5 friends I installed them for since I got mine. GREAT Product.
by: Jerry05/01/2024
I installed the snap pads on my RV. I thought they were on OK got to the camp ground on first trip and one pad was gone. Checked and the other were not on fully. I ordered a new pad but have not tried to put them back on. The snap pads did not snap on even with Dawn...that was a year ago and I do not have a lot of confidence they will snap on when I lower my jacks. I have a concrete drive but the pads on my RV just did not snap in like they should. Snap pads worked fine on my Big Foot levelers on my last RV.
Jenny N.
5/2/2024
These pads should be snapping on for you and staying on. Sometimes there is a clearance issue around or above the metal foot. You would want to have at least 2 inches of full clearance to the sides of the retracted foot and at least 0.75 inches of clearance from the top edge of the foot and above. In transit ground clearance can also cause pad loss. When traveling over curbs, speedbumps, and potholes the landing feet can be set closer to the ground and when driving over these areas the suspension of the rig forces the feet further down. It is recommended that a minimum of 6 inches of full ground clearance is needed to safely use the pads. Also to note that on some of the newer Class A motorhomes that are heavier they use the 9 inch feet plates that can become concaved when used. They will not fail however it makes it near impossible to install SnapPads and keep them on.
by: Lloyd04/30/2024
Great product! Just a drop of dish detergent around the top inside lip then place underneath the jack and press into place…process works best with two people while parked on a hard, flat surface. I took care of the underneath placement while my wife operated the hydraulic leveling system. Like the name says, it was a Snap. Start to finish, all four finished in about 10 minutes. Looks great and makes setup a breeze.
by: Michael 03/28/2023
SnapPads are a convenient addition to my fifth wheel however the metal front pads hold water and if I remove the SnapPads to clean & preserve them, then the warranty is voided.
Michael
3/29/2024
Not so good. Snap pad holds water causing the foot pad to rust. If I remove snap pad then warranty is voided but then I have a badly corroded foot pad.
by: Elizabeth 06/13/2024
I give these Jack Pads Five Stars. If I could, I would give them a 10! No more crawling on hands & knees to place heavy wooden blocks under each jack. They work like a charm. I would definitely recommend these.
by: Terri 06/08/2024
Super easy to install, just dropped the landing gear a little bit, line up the pads, finished dropping the landing gear, snaps right on. Hardest part was bending over to line everything up, LOL. Good product. Fast shipping.
by: Kevin06/04/2023
The work fine and a great addition to my RVs I have them on my Pickup Camper and 5th wheel. My only nit to pick is I wish they a slight better water drainage and they are pricy for what the really are. Easy to install and recommend everyone would have them if the price was lower.
by: GinoRP01/23/2024
Great little product. Love having the pad permanently attached to the jack. Worked perfectly at every campground we've been to for an entire season. Secure footing on any surface. Mounting was a snap, literally.
by: Lesley04/11/2024
I like the concept of the pads and they work ell on the cement however one has never fit well and will not stay in place so I have to “sit” it under the Jack pad each time. I would like to get a replacement for that one since it will not snap on.
Jenny N.
4/13/2024
Lesley, what I am going to do is send you the warranty link from SnapPad. A new one can be sent out.
by: Dennis 03/15/2023
So glad I accepted the recommendation of many and made this purchase. Prior to that, the feet on our jacks were under a lot of stress, and even bending in one place. After a super easy 5 minute install, our coach is now on a stable and supportive base no matter the ground underneath. Well worth the money for these as a must have accessory.
Dennis R.
3/16/2024
After a year my Snap Pads have held up perfectly. Over this last year I have been in more than one unlevel site situation. The pads have been a big help with a more stable footprint. Highly recommend.
by: Thomas 05/24/2024
Work as well as or better than expected. No more sinking into the ground or having to dig out the blocks we were using previously. Have seen units with cheaper ones installed not doing the job that our Snap pads do! Excellent investment!
by: Benjamin04/18/2022
Just as easy to install as the video shows, I have ordered the Snapads for the center jack to complete the set. Thanks etrailer
Benjamin P.
4/18/2023
Still working great and looking great
by: Steven 05/30/2024
No more stacking 2x6 pieces of wood under the jacks if your campsite is gravel. These pads are the cure all for any surface.
by: Chris 06/22/2024
The snap pads r outstanding, money well spent. The rv is way more stable!!
by: Bill L.04/20/2023
These were a breeze to install and they add an extra layer of protection to the landing gear pads. Once you add these pads to your rear land gear you’ll want to ensure you have a clearance of a minimum of six inches from the bottom of the pad to the ground. Refer to you tube channel Big Truck Big RV for a great video on “how to”. One thing I’ve learned recently about the LCI Ground Control 3.0 leveling system is the importance of electrically extending the front jacks a minimum of six inches before dropping the pads. Doing so will allow the auto leveling system to work properly when selected. Again, once adding these pads to the rear jacks you’ll have to ensure there’s a minimum of six inch clearance from the bottom of the pad to the ground. If not you’ll have to unbolt and manually raise the rear jack(s) accordingly. This needed clearance allows the rear jacks to extend a minimum of six inches in order to level the trailer w/o raising the trailer’s tires off the ground. The Snap Pad also provides a slightly larger foot print.
by: Mark03/15/2023
The SnapPads were easy to install and work great. The only thing I wish is that I would have bought these when I purchased my fifth wheeler. I have been able to just drop the legs to where I want to remove the trailer from the truck. No need for other blocks. I always enjoy dealing with etrailer for the best items to purchase for my RV.
by: Brian01/29/2023
I watched the installation video and used soapy water. Pads all snapped into place first try. Levels up the motorhome and holds it place in loose gravel. Looking forward to see how they hold while on the road.
Brian
1/30/2024
After driving across the USA and Canada the pads are still in place and haven’t shaken loose. Great products and highly recommended.
by: Hugh12/03/2022
Once there on they stay on. While we were on a trip an 18 wheeled through a tire and it went under our coach and I thought one or more jack pads were gone when I pulled off the freeway I found a bent drive shaft and a bent exhaust pipe and all of the Jack pads were still in place.
Hugh
12/4/2023
Great. No more Blocks under the jacks
by: John 04/12/2023
Had to spray a bit of silicone to get it to snap in but overall very happy with the product.
John
4/13/2024
They are great!
by: Richard03/16/2024
I was able to put the pads on the front to Jack’s, but could not get them to remain on the rear jacks. I put them on several times, but each time they seem to flex off of the rear jacks. They are the same size as the front one, so I’m not sure what the issue is, the front ones work well they would be five star if I could get the rear ones to work
by: Roger 06/06/2024
Love the Snap Pads. Easy to install, and they're great.
by: Lisa 05/23/2024
I couldn't get the pads on, then I had them put on and I lost 2 during travel. I got the other 2 off and decided to replace the feet on legs...had all 4 pads put on at that point. Perfect. Love them now
by: Kim 06/20/2024
Still holding up like new. Work fantast ic.
25
4297
Show More Reviews
See what our Experts say about this SnapPad RV Jack Pads
- Replacement Jack Footpad & SnapPads For A 2021 Fleetwood Bounder 33CFor your Lippert Level Up Hydraulic Leveling System, you can use the: -Replacement Foot Pad for Lippert Hydraulic Ground Control Leveling System # LC324269. These replacement feet are 9" in diameter, and also includes the o-rings, the bolt, and washers. Additionally, since you mentioned that your foot pads had become bent from use on soft surfaces I recommend also getting a set of snap pads: -SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 9" Round Jack Feet # SP54FR4. These...
view full answer... - Replacement Single 9 inch Round SnapPadThey can be! For a single 9" round SnapPad, like what you referenced in part # SP54FR4, you'll need the part # SP54FR.
view full answer... - SnapPads for Use with Lippert Ground Control TT for Travel TrailersThe Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System - 10,000lbs # LC672136 has 9 inch diameter round feet so you would need the SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 9" Round Jack Feet - Qty 4 # SP54FR4. This comes with four so you'd have all of the pads you'd need.
view full answer... - How to Determine What are the Correct Jack PadsThe snap pads that you need will be determined by the size and shape of your leveling system feet. The SnapPad XTRA Jack Pads # SP54FR4 will fit 9" round feet. The SnapPad EQ Compact Jack Pads # SP24FR4 fit 7" square feet and the SnapPad EQ Plus Jack Pads # SP64FR84 fit 10" round or octagon feet. I have linked our selection of snap pads if you have a different size/shape. You can either use that link or provide me with the leveling system you have or the size/shape of your leveling feet...
view full answer... - Snap Pad Fit for Lippert 6 Jack Ground Control 3.0We have the same # SP54FR4 SnapPad XTRA jack pads in a set of 6 as part # SP54FR6. If you click the provided link, you can see how the snap pads work.
view full answer... - Auto Leveling Jack System Compatible With a 2019 Grand Design Reflection 150 295RL 5TH Wheel CamperI do see that the Lippert Ground Control # LC358590 leveling system was an option on the 2019 Grand Design Reflection 150 295RL 5th wheel camper so you will not have any fit issues with the leveling system. There are some campers that are unable to use a leveling system due to components underneath the trailer but you will not have that on your Reflection. The SnapPad XTRA Jack Pads # SP54FR4 will secure themselves to the jack giving you a larger 11" pad. This saves you from having to...
view full answer... - Can a Bent Landing Gear Foot Pad Be Used With a SnapPad?The feet on your motorhome's landing gear should not be bent at all, and for a SnapPad like the SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 9" Round Jack Feet # SP54FR4 you're looking to fit, it's going to need to be replaced. For instance, if you had a Lippert Landing Gear and needed a replacement 9" foot to work with the SnapPads mentioned above, you'd need the Lippert 5th Wheel RV Landing Gear Foot Pad # LC314667.
view full answer... - Snap Pad Compatible with 9 Inch Diameter Foot of Level Up System on 2019 Nexus ViperI assume you have a 2019 Nexus Viper which has the Lippert Level Up hydraulic leveling system based on my research. If you have the standard 9 inch diameter foot pad then you would use the SnapPad Jack Stand Pads for 5th Wheel and Class A Motorhome - 9" Round Jack Feet - Qty 4 # SP54FR4 if you have a 4 point system or # SP54FR6 for a 6 point system.
view full answer... - Should The Wheels Come Off The Ground When Leveling A Camper Or Trailer?Your leveling system is not supposed to lift the wheels off the ground; this could exceed the capacity of your leveling system and cause damage and I do not recommend doing so. If you can make any adjustments to the legs then you will want to go ahead and do that, or depending on the model you may be able to reset the zero point. Feel free to let me know which system you have and I will track down the instructions for this process. If you happen to have the Lippert Ground Control 3.0...
view full answer...
- Should I Choose SnapPad Or Stromberg Carlson Jack Pads For 9" Round Landing Gear? Personally I prefer the SnapPad XTRA Jack Pads # SP54FR4 over the Stromberg Carlson # SC99MR as they have been around much longer and proven themselves to be a quality product. Both these will fit 4 jacks with a 9" round landing pad.
view full answer... - Are Single SnapPad Replacements Available For Purchase Yes, we carry replacement 9" round SnapPads with part # SP54FR.
view full answer... - Correct Snap Pads for Newmar Canyon Star MotorhomeI recommend measuring the feet on your leveling system and noting the shape of the pad. That said, it should be 9" round pads and in which case you would use the SnapPad XTRA Jack Pads for Lippert Leveling Systems part # SP54FR4. If you have a different size/shape you can select this from the list below.
view full answer... - Recommended Replacement For An LCI Hydraulic Leveling System Rear Or Center JackThe 195860 code you mentioned is for a center or rear jack of a LCI Hydraulic Leveling system, so the Replacement Hydraulic Jack Assembly for Lippert Level Up System - 8,000lbs # LC36VR is a match to replace your current jack. It has a weight capacity of 8,000lbs and 9" round footpad. If you need any pads for your jacks you can use the SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 9" Round Jack Feet - Qty 4 # SP54FR4 which will fit 9" round jack feet. These pads install on your...
view full answer...
- Snap Pads For 2018 Newmar Bay StarGreat question. To get the proper Item and fit I will need to know the size and shape of the feet on your system. Are they round, square, rectangle. Do they have a lip or raised edge or are they complete flat and level? The SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 9" Round Jack Feet - Qty 4 # SP54FR4 will work with jack feet that are round and have a 9 inch diameter and no lip or raised edge.
view full answer... - Comparing SnapPad XTRA Jack Pads SP54FR4 and SN78FRThe SnapPad XTRA Jack Pads for Lippert Leveling Systems part # SP54FR4 are the exact same as the Replacement Pads for SnapPad Jack Stand Pad System part # SN78FR. The latter part is actually just a replacement for the former which is offered in a few different quantities. I recommend whichever is more cost effective at the time. Nevertheless, they will both fit a 9" round jack foot so if that's what you have then either will work great for you.
view full answer... - Replacement Silver Jack Leg Assembly For The Lippert Level-Up SystemI believe what you're looking for is the: -Replacement Lippert Level Up Hydraulic Jack - Silver # LC63ED. This is the same as the Replacement Hydraulic Jack Assembly for Lippert Level Up System # LC36VR but is silver in color as opposed to black. Both of these jacks have a weight capacity of 8,000lbs, a travel of 15" and a footpad diameter of 9". A great upgrade to your 9" foot pads, is a set of the SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 9" Round Jack Feet # SP54FR4. These...
view full answer... - Replacement Foot Pad For Lippert Hydraulic Leveling On a 2018 Forest River Sunseeker 3010DS RV You will need the Replacement Foot Pad # LC324269 for the Lippert Hydraulic Ground Control Leveling System on your 2018 Forest River Sunseeker 3010DS. The SnapPad XTRA Jack Pads # SP54FR4 will fit your jacks if you do not already have pads for the jacks. These stay mounted on the jacks so you will not have to crawl under your RV to place and retrieve any pads.
view full answer...
- Picking Out Foot Pads for Jayco Precept 2015 35UP w/ Power Gear Leveling SystemMeasure the diameter of the feet of your Power Gear setup and we'll be able to determine if the # SP64FR4 is a fit. This part number is for 10 inch diameter feet which is most likely what you have. If you had 9 inch diameter feet instead you'd want the # SP54FR4, 7 inch # SP24FR4 11-1/2 inch or 12 inch part # SP84FR74, 8 inch # SP34FR4 etc. I attached a page to see all the options we have since there are quite a few.
view full answer...
- SnapPad or Stromberg Jack Foot for 9 inch Diameter Jack FootFor a 9 inch diameter jack foot pad I would go with the SnapPad part # SP54FR4 over the Stromberg part # SC99MR since the SnapPad will be a little bit larger in diameter which distributes the weight a little better.
view full answer... - 9 Inch SnapPads for Thor Palazzo Class A MotorhomeThe correct SnapPad pads for a 9 inch round jack foot is part # SP54FR4, which includes 4 pads
view full answer... - Compatibility Of RV SnapPads And Stromberg Carlson Base Pad ExtremeSnapPads like part # SP54FR4 are not able to be used under the Stromberg Carlson Base Pad Extreme # SC33VR as they wouldn't properly fit the base of the base pads. The base pads can be used under the SnapPads to help clear up large gaps though. You can not use the # SC33VR upside down either as this work completely against it's weight distributing design. This would also most likely have the jacks come down on the inner supports of the base which would end up damaging them.
view full answer... - How To Determine Which RV Jack Pads To Choose For A 2021 K-Z Durango Half-Ton Fifth WheelIn order to get the correct snap pads for your 2021 K-Z Durango Half-Ton Fifth Wheel, you'll need to measure the diameter of your jack foot. From here we can determine what snap pads will work for you, for example, if you measured 9" diameter, and you have round jack feet, then you can use the SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 9" Round Jack Feet # SP54FR4 I have attached a webpage containing all of our RV jack pads.
view full answer... - Availability of 6-Pack 9" SnapPad Jack Stand PadsWe do carry the 9" SnapPad Jack Stand Pads in a 6-pack as part # SP54FR6!
view full answer... - What To Do If Your SnapPads Are Giving You A Hard Time During Installation If you're having trouble installing your SnapPads # SP54FR4 then SnapPad actually recommends lifting the jack foot up 3-4" and using a shim to pry the corner of the pad up and help as the jack foot comes back down, sort of like using a shoe horn to get your foot into a shoe. You could also try rubbing a bit of dish soap around the rim of the pad and jack foot to help it slide in easier.
view full answer...
Do you have a question about this RV Jack Pad?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Video Edited:
Joshua S
Video Edited:
Jacob T
Updated by:
Wilson B
Updated by:
Noah M
Test Fit:
Shane H
Test Fit:
David F
Video by:
Jonathan Y
Video by:
Schuyler H
Written by:
Mike S
Installed by:
Andy C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Bruce
5/13/2024
I am very pleased with the Jack pads. I rarely need to use blocks anymore and leveling is so much easier with them plus they are great on my asphalt driveway. I give them a A++