Snap Pads For 2018 Newmar Bay Star

Question

Question:

I was wondering if you could tell me if the part SP54FR4 Snap Pads will fit my 2018 Newmar Bay Star? I would like to purchase them from you if they fit. If not which ones would fit my RV? Also I have purchased other things from you and have gotten a military discount, can I get that discount on these? I have already sent you copies of my retired military ID.

asked by: Kent T

0

Expert Reply:

Great question.

To get the proper Item and fit I will need to know the size and shape of the feet on your system.

Are they round, square, rectangle. Do they have a lip or raised edge or are they complete flat and level?

The SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 9" Round Jack Feet - Qty 4 # SP54FR4 will work with jack feet that are round and have a 9 inch diameter and no lip or raised edge.

expert reply by: David B

0

Answer 1

First of all, thank you for your service. Unfortunately at this time we don't offer a military discount, but we do have free shipping most of the time on orders like this one. To confirm your fit, we have two sets of jounce springs available from…

view full answer...

Answer 2

When it comes to installing a trailer wiring harness on your 2000 Chevrolet Express Van The T-One Vehicle Wiring Harness #118377 is the best out of all the plug and play harnesses for your vehicle. The T-One harness are made out of a heavier gauge…

view full answer...

Answer 3

First, thank you for your service! Unfortunately we don't offer a discount simply because we try to give all of our customers the lowest possible price at any given time. For your 2020 Chevy Traverse I recommend the RedArc Tow Pro Elite #RED44FR…

view full answer...

Answer 4

The Titan Chain Tire Chains w Cams #TC3235CAM are confirmed to fit your 35x12.5x20 sized tires. They do have built in cam tighteners so additional adjusters are not necessarily required although they can make things easier. For a rubber adjsut you…

view full answer...

Answer 5

To replace the ADTH motor on your landing gear the Stromberg Carlson #LC196308 will work perfectly. This motor is rated for 6,500 pounds like your existing unit. For a gear box replacement you'd want the #LG-179015.

view full answer...

Answer 6

Since you said your gearbox says Venture on it we have just what you need. Since the gears are stripped it would be the best solution to replace the gear box and the motor. Gear box #LG-179015 will fit Venture landing gear jacks and replacement motor…

view full answer...

Answer 7

From the weight capacities you listed, I suggest going with the SumoSprings #SSR-610-40. This will give you the needed support while not affecting the ride as much as a higher capacity option. I do have to mention, however, that all the suspension…

view full answer...

Answer 8

If your factory hitch on your 2021 Subaru Ascent sits flush to the bumper like the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C25VR, you will have no problem with attaching the MaxxTow 30x50 Wheelchair Carrier w/ 48" Long…

view full answer...

Answer 9

For your 2019 Silver Creek Silverback 35IK, you can use either two of the single axle kits #LC87120 for your tandem axle trailer, or you can use 1 of the tandem axle kits #RR23QX. The tandem axle kit is the exact same as two of the single axle kits,…

view full answer...

Answer 10

The difference between load ranges varies based on the tire size and brand. When comparing two tires of the same size and brand, a load range D tire will always have a greater weight capacity and psi rating than a load range C. However, when…

view full answer...

Answer 11

If your break away switch looks like #HM20010 then you should just have to push the pin back in. This will break the circuit and release the trailer brakes. If this does not work then there is some other wiring issue going on. You will need to remove…

view full answer...

Answer 12

Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…

view full answer...

Snap Pads For 2018 Newmar Bay Star

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching