Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces 1 pad for your SnapPad jack stand pad system. Pad increases the surface area of the jack foot to help prevent sinking and provides added stability. Fits 10" octagonal or round concave jack foot.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody. Andy here with etrailer.com and today we're gonna take a brief look at this replacement pad for your SnapPad Jack Stand Pad System. This is going to replace one pad for your SnapPad Jack Stand Pad System, and this pad is going to fit a 10 inch octagonal or round concave jack foot. And as you know, this pad will increase the surface area of your jack foot to help prevent sinking and provide added stability. Now while we're here, let me pull out my tape measure here, lean this up against me and just give you the overall diameter. And as you can see, we are sitting right at 13 and a quarter inches in diameter.
And the overall height, we are sitting right at three inches tall. I weighed this earlier and this pad individually by itself weighs about nine pounds. So if you are looking for a SnapPad Jack Stand Pad System that's going to fit your 10 inch octagonal or round concave jack foot, this is going to be the pad that you are going to need. That's gonna conclude our brief look today. I do hope that it was helpful for you.
Again, my name is Andy. Thank you for joining me.
Average Customer Rating: 4.8 out of 5 stars (4172 Customer Reviews)
Replaces 1 pad for your SnapPad jack stand pad system. Pad increases the surface area of the jack foot to help prevent sinking and provides added stability. Fits 10" octagonal or round concave jack foot.
I’ve had to snap pads on for over a year. They were easy to install and work as advertised.
Perfect transaction, no issues and on time delivery!
Works as described fast shipping
The replacement pad is for one that was knocked off by some road debris. I will install it tomorrow. Snap Pads are a great product that I have used for at least 6 years. This is the first one I’ve lost.
While I love the pads and the protection they provide, they should not be considered permanently secured to the pad. We lost two on a 500 mile road trip and had to find a way to more permanently secure them to our RV.
They work great. Fit perfectly.
Have used the product for one season on my Jayco Seneca. Lost one of the snap pads to include the foot plate. So Seneca owners, beware and check your foot plates to ensure their secure...or, pay the piper for a replacement.
They work just fine no issues using them. Easy install if you use lots of dish soap to get them on.
One of our snap pads got damaged. I called etrailer and spoke with Lori. She guided me through which pad I needed to order and placed the order for me. The pad arrived quickly, and fit perfectly. etrailer rocks!!
Issues with Renegade Valencia suspension. I keep losing rear ones on the highway. Gave up and went to another product in the rear. List 2 in a year.
Jenny N.
7/7/2022
I do know that often if snap pads are lost that there is a clearance issue around or above the metal foot. You would want to have at least 2 inches of full clearance to the sides of the retracted foot and at least 0.75 inches of clearance from the top edge of the foot and above. In transit ground clearance can also cause pad loss. When traveling over curbs, speedbumps, and potholes the landing feet can be set closer to the ground and when driving over these areas the suspension of the rig forces the feet further down. It is recommended that a minimum of 6 inches of full ground clearance is needed to safely use the pads.
Snap pads came even faster than I thought that they would.
On my way home from purchasing a new to us Newmar we lost one of the SnapPad and could not find it anywhere (sold out due to Covid-19). An RVer on social media recommended to try etrailer. I called and Odelia K. was able to help me in getting the right SnapPad for my leveling Jack 10" base plate Octagon.
Thank you Odelia
These were a perfect fit as I had hoped, easy to install as long as you follow instructions. This is the third coach we have had these on and all have worked well.
They do not stay on. This is my third set. They are the correct size, they just do not handle any bumps or nudges.
Sierra K.
5/4/2022
It is not often that these pads are loose enough to come off. If you believe that you have the right size, the other issue may be clearance while driving over inclined areas and potholes so please be sure your footplate has a minimum of 6 inches of ground clearance. Also, you will want to have at least 2 inches of full clearance to the sides of the retracted foot and at least 0.75 inches of clearance from the top edge of the foot and above. The only other thing I can think of is by having a damaged foot plate.
Service was excellent.
These pads went on easy and make life so easy during RV setup. Still working great after a year. Definitely recommend them!
They work great, no more having to bend down and align blocks under the jacks.
I like dealing with etrailer because they are, without exception helpful. They get the orders right and delivery is timely. Highly recommended.
Easy order and fast shipping. Excellent product quality.
Samuel
4/8/2024
While I haven’t used the product as much as I had hoped, it has worked as advertised. I am gettingtoo old to crawl under the rv to set blocks so snap pads solve the problem and saves my back
Easy to install - Company very accommodating with returns & ordering
These pads work great!
One came off and had to replace
Jenny N.
11/5/2021
I will have our customer service team reach out to you.
David
4/2/2022
Half Good
Brooke M.
4/22/2022
David
4/2/2022
Half Good: Love Snap Pads but to anyone with the S2RV Chassis, which I have, they will not stay on the rear levelers due to the chassis design. They will get pushed off going down the road. I had several fall off the rears and finally a video camera caught it all. Otherwise, they stay on the front levelers and I love the product. Wish their engineers would design a new rear pad to solve this issue with the S2RV chassis.
This size fit the our leveler feet well and snapped on. Solid and heavy duty.
Do you have a question about this RV Jack Pad?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ronald B.
8/19/2022
Great. Replaced the lost pad now I check before the travel season to ensure that the jack plates are tight. With the added weight of the jack pads and traveling rough Alaskan roads and those in Canada, good to snug down the fittings.