Correct SnapPad for 10-1/2" Replacement Foot Plate for Lippert Power Gear Hydraulic Jack

Question

Question:

what is the snap pad for this foot plate Item # LC359344

asked by: Patrick J

0

Expert Reply:

The correct SnapPad kit for your Replacement Foot Plate # LC359344 is the SnapPad Prime Jack Pads # SP84FR4.

If you need just a single SnapPad then you're looking for part # SP84FR instead.

expert reply by: Jon G

0

Will

5/2/2024

I only need one snap pad

Reply

Jon G.

5/3/2024

@Will For the single step you need the Replacement Pad # SP84FR.

Reply

Answer 1

You do need a compatible flat tow wiring harness to safely tow your 2014 Jeep Cherokee TrailHawk 4x4. My best recommendation for you is the Hopkins #HM56208 which is custom made to plug into your vehicle's existing wiring. In addition to a…

view full answer...

Answer 2

Yes, your Jeep Cherokee KL can be flat towed; though you did not mention the year of your Cherokee, the KL started in 2014 and each of the parts I recommend for you will be compatible with 2014-2018 Cherokees. There are a number of parts you're…

view full answer...

Answer 3

Yes, we do have a replacement foot for the Lippert Replacement Atlas Jack #LC359278 that you referenced as part #LC359344.

view full answer...

Answer 4

Thanks for reaching out! To lock your Roadmaster Hitch Mounted Spare Tire Carrier #RM-195225 to your Class C motorhome you can use the Roadmaster Quick-Disconnect Padlock #RM-301 in place of the hairpin clip that comes with the carrier. This…

view full answer...

Answer 5

The SnapPad EQ Plus Jack Pads #SP64FR84 will work on class A and class C motorhomes with equalizer leveling systems that has 2 octagon jack feet and 2 round jack foot. The SnapPad EQ Octagon Jack Pads #SN76FR will work with class A, B, and C…

view full answer...

Answer 6

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

view full answer...

Answer 10

To determine if your motorhome has the Tiffin air brake setup or Freightliner BrakeSync you'll need to look at the rear and see if there's an quick disconnect fitting for your air line. The standard Tiffin air coupler fitting would look like…

view full answer...

Answer 11

Hey Dave, The Curt Custom Tail Light Wiring Kit for Towed Vehicles #C96JR would not be intertwined or interfere with the Blue Ox Patriot #BLU37TR. This wire harness is simply plugging into the motorhome and Gladiator tail lights to copy the light…

view full answer...

Answer 12

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Correct SnapPad for 10-1/2" Replacement Foot Plate for Lippert Power Gear Hydraulic Jack

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching