Buyers Products 2" Pintle Hook Mount slides into a 2" receiver to provide a mounting plate for a variety of pintle hooks and combination hitches. The pintle hook mount features four pairs of mounting holes for a three position mount. The strong, durable construction features continuous welds and a black powder coated finish for corrosion resistance.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're gonna take a look at the 2" hitch receiver pintle hook mount with the 9" shank. Now this 2" pintle hook mount will slide into a 2"x2" receiver, provides a mounting plate for a variety of pintle hooks and combination hitches. A pintle hook mount will feature two pairs of mounting bolts right here for a single position mount. This is a strong, durable construction. Features continuous welves 00:00:22 and the whole part is a black powder coat finish for corrosion resistance. It's carbon steel construction.
Maximum gross trailer weight capacity is 20,000 pounds. Maximum vertical load or tongue weight capacity is 4,000 pounds.Now I wanna give you a few measurements on this. We're gonna start with the shank itself. The shank will measure 9" from the front of the plate to the end of the shank. The plate itself is a 1/2" and then from the back of the plate to the end is about 8-1/2".
The hitch pin holes are 5/8" diameter hitch pin holes. And then the center of the hitch pin hole to the back of the plate is gonna measure right at 5-7/8". Now the mounting base itself is gonna measure 5" wide. The height on it is gonna be right at 3-3/4". And then the mounting hole spacing if we go across horizontally, center to center, is right at 3-3/8".
And if we go vertical, center to center, is right at 1-3/4".But that should do it for the review on the 2" hitch receiver pintle hook mount with the 9" shank.
Average Customer Rating: 4.8 out of 5 stars (108 Customer Reviews)
works great fast shipping A++++++++++++ +++++++
As advertised, good quality of workmanship and finish
Heavily built and well made.
I've purchased these before for other vehicles. Very solid.
Very solid
I drilled another 21/32" hole in my hitch, which brought it nearly 2" closer to the truck. I debated welding the original hole shut but decided not to due to the unknown heat factor. It hasn't folded up yet, and I'm sure there's been a few times when I was grossly overloaded, and significantly beyond tongue weight at least until things were situated properly. Never had a problem. Wish it would've been closer to the truck from the get go but if another hole would've weakened anything, I'd have bent it already.
I went out of my way to buy this one specifically because it was the only one I could find listed as American made.
Well it showed up made in China.
The quality is decent and it will do the job but it hurts to know I can’t buy a American made pintle hook at all.
If I had known I would have put in time to shop used locally.
This was my first time ordering with etrailer and I can’t believe how fast I received the products (2days!!) and with free shipping as well . The products are top quality and as described online . The only thing I would add is that I ordered a trailer pintle hitch and a drop mount , and neither one had the bolts to mount the two together nor did I see it offered for sale as a “kit” to be purchased . That would be a nice compliment to add to the package .
Very good product
Looking for a heavy duty mount for a pintle hook--this seems to be one of the highest rated mounts I could find. Need to add a rear tow hitch to our Rose Parade float chassis due to new parade rules. Easy to install, but did not come with a pin--need to purchase one separately.
Very well made with substantial weight capacity. Good finish. Bolt pattern fit my pintle hitch perfectly. I’ve ordered many times now from etrailer and the shipping is always fast.
Perfect for tow straps and recoverys for fellow offroaders or jus yanking someone out of the mud.
First of all this thing is stout and they shipped it early. Very good experience.
Works perfect
Did what I needed.
2 1/2" receiver Pintle hitch works great. Very heavy duty. I pull 30 foot trailer with a 16,000 pound backhoe on it and it works great.
Works excellant as a mount for my pintle. I bought it to run upside down to level my trailer.
This Curt Pintle Hook, along with the Buyers Products 3 position hook mount, works just fine. Good heavy duty hitch!
I really like how the hook mount is one solid piece. I ordered the pintle hitch recommended to go with this mount, the only downside is the bolts are larger than the mounts' predrilled holes. Not a big issue for me as I have the tools and bits to enlarge the holes but for someone who doesnt they would have to take it to someone to be done. Other than that great products!
sturdy product, good price, very fast shipping, durable packaging-thank you
The hole drilled for the pin should be further ahead so more of the I beam part of the hitch is able to slide into the receiver. This would make it a lot stronger and would allow for the pintle eye to be closer to the truck which in turn would make the trailer handle better and would be less stress on the product with more support overall.
Came missing a lock washer. During follow up on how my order went I let them know and a washer appeared on my doorstep a couple days later. Great service and very responsive. I will definitely use these folks again!
Works really well. Bolted to the pintle hitch perfectly and the finish has stayed on.
Solid, well-built, and provides a great fit for 2 1/2” hitch. Definitely provides peace of mind with the loads I’m pulling knowing the capability of this hitch. Highly recommended!
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.