Buyers Products 2" Pintle Hook Mount slides into a 2" receiver to provide a mounting plate for a variety of pintle hooks and combination hitches. The pintle hook mount features three pairs of mounting holes for a two position mount. The strong, durable construction features continuous welds and a black powder coated finish for corrosion resistance.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at a two-inch pintle hook mount. The pintle hook mount slides into a two-inch by two-inch trailer hitch receiver. It secures in place with a hitch pin and clip or a hitch lock. Those items are sold separate and available at etrailer.com. It slides into your hitch and provides a mounting plate for a variety of pintle hooks and combination hitches. Now, the pintle hook mount features three pairs of mounting holes for a two position mount, so position one and then position two.
This is a strong durable carbon steel construction. It's got the solid shank design. Features continuous welds and a black powder coated finish to resist rust and corrosion. This can be used in either the drop or rise positions, whatever works best for your application.Now, the overall length of the unit, I took a measurement from the very back to the very front and got a measure of around 10 and one-quarter inches long. The hole spacing in here on the mount plate, so side to side the holes are separated on center by three and three-eighths inches.
Up and down they're separated on center by one and three-quarter inches. The mounting plate itself measures five inches wide by five and three-quarter inches tall. The maximum gross trailer weight capacity for this unit is 15,000 pounds. Maximum tongue weight capacity is 3,000 pounds. That's going to do it for today's look at the two-inch pintle hook mount..
Average Customer Rating: 4.8 out of 5 stars (110 Customer Reviews)
I drilled another 21/32" hole in my hitch, which brought it nearly 2" closer to the truck. I debated welding the original hole shut but decided not to due to the unknown heat factor. It hasn't folded up yet, and I'm sure there's been a few times when I was grossly overloaded, and significantly beyond tongue weight at least until things were situated properly. Never had a problem. Wish it would've been closer to the truck from the get go but if another hole would've weakened anything, I'd have bent it already.
I went out of my way to buy this one specifically because it was the only one I could find listed as American made.
Well it showed up made in China.
The quality is decent and it will do the job but it hurts to know I can’t buy a American made pintle hook at all.
If I had known I would have put in time to shop used locally.
This was my first time ordering with etrailer and I can’t believe how fast I received the products (2days!!) and with free shipping as well . The products are top quality and as described online . The only thing I would add is that I ordered a trailer pintle hitch and a drop mount , and neither one had the bolts to mount the two together nor did I see it offered for sale as a “kit” to be purchased . That would be a nice compliment to add to the package .
Very good product
Looking for a heavy duty mount for a pintle hook--this seems to be one of the highest rated mounts I could find. Need to add a rear tow hitch to our Rose Parade float chassis due to new parade rules. Easy to install, but did not come with a pin--need to purchase one separately.
Very well made with substantial weight capacity. Good finish. Bolt pattern fit my pintle hitch perfectly. I’ve ordered many times now from etrailer and the shipping is always fast.
Perfect for tow straps and recoverys for fellow offroaders or jus yanking someone out of the mud.
First of all this thing is stout and they shipped it early. Very good experience.
Works perfect
Did what I needed.
2 1/2" receiver Pintle hitch works great. Very heavy duty. I pull 30 foot trailer with a 16,000 pound backhoe on it and it works great.
This Curt Pintle Hook, along with the Buyers Products 3 position hook mount, works just fine. Good heavy duty hitch!
Works excellant as a mount for my pintle. I bought it to run upside down to level my trailer.
I really like how the hook mount is one solid piece. I ordered the pintle hitch recommended to go with this mount, the only downside is the bolts are larger than the mounts' predrilled holes. Not a big issue for me as I have the tools and bits to enlarge the holes but for someone who doesnt they would have to take it to someone to be done. Other than that great products!
The hole drilled for the pin should be further ahead so more of the I beam part of the hitch is able to slide into the receiver. This would make it a lot stronger and would allow for the pintle eye to be closer to the truck which in turn would make the trailer handle better and would be less stress on the product with more support overall.
sturdy product, good price, very fast shipping, durable packaging-thank you
Came missing a lock washer. During follow up on how my order went I let them know and a washer appeared on my doorstep a couple days later. Great service and very responsive. I will definitely use these folks again!
Solid, well-built, and provides a great fit for 2 1/2” hitch. Definitely provides peace of mind with the loads I’m pulling knowing the capability of this hitch. Highly recommended!
Works really well. Bolted to the pintle hitch perfectly and the finish has stayed on.
Just received the hitch mount only 3 days after order and everything was there inclusive of the bolts. Really fast service and helpful on my questions.
The construction is very solid and I like the curved ends. Keeps from ripping clothing on the edges. Will hopefully get a chance to try it out this weekend.
Excellent products and the website is easy to navigate. Parts arrived quickly and a follow up email was received to check on arrival of parts. Excellent customer service. Would highly recommend etrailer.com for all your trailer part needs.
Nice finish on the hitch mount. Appears to be a quality beefy hitch mount.
I have purchased more than one of these and find them to be better than what is offered in the big box or [online] outlets at a better price.
You can pay more but that will not get one that works better.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.