Summer Starts Here - Save up to 70%
The Adjustable Eye Assembly from Buyers Products allows you to adjust the position of a tow eye for level towing. It comes with a forged steel eye (3" interior diameter) and 3 position formed steel heavy duty channel bracket. Simply bolt the eye into the channel bracket at the position that fits your needs, and connect to the pintle hook on your truck. Fasteners are included. The adjustable eye assembly will handle a maximum gross trailer weight of 20,000 lb.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're going to look at the three position adjustable lunette ring with the 3 inch heavy-duty channel. It has a 20000 pound weight capacity. Now this adjustable lunette ring will allow you to adjust of the tow line for level towing. It comes with a forged steel eye with the 3 inch interior diameter, and a three position formed steel heavy-duty channel bracket.And the three positions would be if you have it here, here or here. Common use for this is construction trailers or equipment haulers. Basically you just simply bolt the eye into the channel bracket at the position that will fit your need and then connect to the pinto hook on your truck.
As you can see the fasteners are included with this. The three position bracket will come with even gussets right there that you can weld on for even greater support.All these parts have a plain finish to them. The maximum gross trailer weight capacity is 20000 pounds. Maximum vertical load or towing weight is 2000 pounds. Now I'm just going to give you a few measurements.
I'm going to start with the channel. The channel height is going to be right at 7 5/8 inches. The overall width of the channel from from outside to outside is is going to be right at 4 inches. Inside is right at 3 inches.And then the mounting holes on the side, the measurement from the center of one to the center of the other, is going to be right at 2 inches. The ring itself, is going to have 3 inch inside diameter.
The overall diameter, edge to edge, is going to be right at 6 1/4 inches. And the depth, is we measure from the very front to the very back of the channel is going to be right at 8 1/2 inches deep.And that should do it on the review on the three position adjustable lunette ring with the 3 inch heavy-duty channel and a 20000 pound weight capacity.
Average Customer Rating: 4.6 out of 5 stars (5 Customer Reviews)
Built tough. but had to mill .080 off the back of lunette ring so that I could get clearance enough to bolt the bracket on machine and still install ring
Nice and very heavy duty.
Very heavy duty. I’m sure it will last for years to come.
Item arrived a day sooner than expected. And was as described.
Do you have a question about this Lunette Ring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.