Titan Chain Sliding Lashing Winch for Flatbed Truck or Trailer - 5,500 lbs

Video Transcript for Review of Titan Chain Lashing Winch - Sliding Winch - TCLR900

Today we're going to take a look at the Titan Chain Sliding Lashing Winch for flatbed truck or trailer. This is going to have a 5500-pound capacity. This is going to allow you to lash down any of your loads onto a flatbed truck or trailer, using a wide strap. Now, that strap is sold separately. We've got a lot of options here available at etrailer.com. So definitely check those out, if you need some straps for tying down your load.

And it's going to work with straps that are up to four-inches wide. And it also is going to require a winch tightening bar, which is also sold separately for that operation. It's going to drop through there and allow you to crank that down, to tighten down any of your loads.Now, you want to make sure that you mount this in the orientation I have it here. This is just going to slide into the winch track. So, it has these two little indentions there, kind of little triangle shapes.

This is just going to slide along your flatbed truck or trailer, and be in whatever location you need it to be. The tension against that strap is going to be what holds it into position. But basically, you want that latch to engage the teeth on our wheel, so that it can't back out. So gravity just pulls it down, so it can click into place, and then it's going to hold your load secure there. So you can slide this back and forth to get it wherever you need it to be.

And then just tighten down your strap to secure it in place.As you can see, all our surfaces are covered in a nice black powdered coat, to make sure that we don't have any rusting on our steel. It is made of a durable steel construction. And this does meet or exceed all DOT requirements, and WSTDA specifications.As far as the dimensions on this, it's going to be about 7-3/4-inch wide. And 6-3/4-inch tall, and 4-inches deep. The diameter on the mandrel is going to be 1-15/16ths in diameter.

The opening for our handle, for our winch handle, is going to be 15/16th-inch in diameter. The slot in the middle of our mandrel bar, that's going to be 1/2-inch. And again, the max capacity with this lashing winch is going to be 5500 pounds.And that's going to do it for our look at the Titan Chain Sliding Lashing Winch for flatbed truck or trailer.