Custer 40-LED Strobe Light Bar w/ Controller Box - Permanent Mount - 23" Long

Video Transcript for Custer 40-LED Light Bar with Controller Box Review

Today, we're going to be taking a look at the Custer 40-LED light bar with control box, part number STR-40-S. This light bar is perfect for utility vehicles such as snow plows, construction, or security. It features various light patterns. Let's go ahead and go through them. We've got left and right alternating. We've got center, and then out strobe. We've got the left to right directional, and then the right to left directional.

Then we've got center to left and right out. This is strobe left and right. Then we've got strobe left to right. This one is full strobe. Then we're back to where we started. It also features combination magnet and suction cup mounts, which makes for easy detachment and attachment.

If you'd like to permanently mount the light, you could pick up the same setup with part number STR-40. It features 10 modules surrounding the light bar, each module containing four LEDs, giving you a total of 40 LEDs. It's going to be plenty bright during the day and night. The polycarbonate lenses and the base offer superior protection against all weather conditions. It's 23 inches in length.

It's about 3 1/4 inches wide, and it's going to sit about 2 1/2 inches high. The light bar uses a 13 1/2 foot cable, so you're going to have more than enough to run it how you want. It comes with a dash mount control box which allows you to control the on and off, and the functions of your light bar. When you turn your light bar on, it copies the light pattern so you can see what's being used. It comes with an adjustable mounting bracket, so you can mount it anywhere you'd like in your vehicle. You will have to provide your own hardware to mount it.

The bracket can be either on the bottom or the top. We'll go ahead and give you some dimensions so you can decide if it's going to work out great for you. It measures 5 1/2 inches long, 3 3/4 inches deep, and it's 2 inches tall. The whole system uses a quick disconnect cable. That way if the light is not in use, you don't have to remove the control box with it. It can simply be powered by any 12 volt system, and it is fuse protected. Customers on our site are comparing this to the Blazer mini amber light. The Custer light is twice as long, and is going to be all in all more visible. Both lights feature about the same flash patterns, but the Custer light uses a control box which copies the signal so you can see what pattern you're using. That's going to complete our look at the Custer 40-LED light bar with control box, part number STR-40-S.