Winch to Lift a Slot Car Table Up Vertically
Question:
I want to winch up/down a 200 lb maximum slot car table. I understand the use of safety chains once the table is stored in the up position and will use of course. I get that the winches come with safety pawls to raise the load without runaway. My question is lowering the table? Not sure which hand winch will let me lower the 200 lb vertical load slowly with braking action. Thanks and you guys have a great website.
asked by: Ross T
Expert Reply:
The perfect winch for you is going to be a worm gear winch. They were made with these types of applications in mind. We have some that mount to the ceiling like # DL10954 so you would not have to necessarily use any pulley blocks to get a straight line pull.
Worm gear winches brake automatically if you let go of the handle no matter which way you are turning it. The only issue you might run into is that worm gear winches require a lot of handle turns for 1 turn of the drum. But on some you can attach a power drill and turn it very fast such as # DL11011.
We also have an electric hoist, # DL25727, that you might be interested in. Since it is electric you won't have to worry about cranking a handle. The 1200 pound capacity is also way more than enough for a 200 pound load.
Products Referenced in This Question
Dutton-Lainson Hand Winch - Worm Gear - Hex Drive - 1,500 lbs
- Trailer Winch
- Brake Hand Winch
- Utility Winch
- Standard Duty
- Standard Hand Crank
- Worm Gear Winch
- Wire Rope
- Dutton-Lainson
more information >
Dutton-Lainson StrongArm Electric Winch w/ Remote and Pulley Block, AC Powered - 1,200 lbs
- Electric Winch
- AC Winch
- Spur Gear
- 1001 - 2000 lbs
- 21 - 30 lbs
- Medium - 5 to 9 fpm
- Plug-In Remote
- Wire Rope
- Dutton-Lainson
more information >
Product Page this Question was Asked From
Dutton-Lainson Hand Winch - Worm Gear - Loop Drive - Ceiling Mount - 1,500 lbs
- Trailer Winch
- Brake Hand Winch
- Utility Winch
- Standard Duty
- Loop Drive Crank
- Worm Gear Winch
- Wire Rope
- Dutton-Lainson
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Video: Dutton-Lainson Trailer Winch - Brake Hand Winch - DL11011 Review
- Shop: Dutton-Lainson Hand Winch - Worm Gear - Hex Drive - 1,500 lbs
- Shop: Hex Shaft for Dutton-Lainson Worm Gear Winches
- Shop: Dutton-Lainson Hand Winch - Worm Gear - Split Reel - 1,500 lbs
- Shop: Dutton-Lainson Hand Winch - Worm Gear - 2,000 lbs
- Article: Most Popular Wheel Bearings
- Q&A: Hand Winch for Use with Lightweight Loads
- Q&A: Light Duty Brake Winch that Brake Operates in Reverse
- Q&A: Telescoping Ham Radio Tower Winch Recommendation
- Q&A: Cable Attachment and Function of the Dutton-Lainson Worm Gear Winch - 1500 lbs # DL11011
- Q&A: Using Worm Gear Winch Versus Brake Winch for Hoisting Small Dinghy
- Q&A: Is a Driver Extension Available and How Does the Cable Install on Worm Gear Winch DL10954
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Trailer Tire Recommendation for Size 5.80-8