Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
Item # C59236
Retail:$120.95
Our Price: $78.53
You Save: 35%
Confirmed to Fit
2016 Honda Pilot
without factory 7-Way
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (970)
- Q & A (0)
- Photos
- Used (1)
2016 Honda Pilot - Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- 4 Flat
- Trailer Hitch Wiring
- CURT
- Converter
Install a 4-way flat on your Honda Pilot with this splice-in harness. Powered converter connects directly to battery to reduce strain on wiring. Potted, SMT construction boosts water and vibration resistance. Works with 2-wire, 3-wire, and PWM systems.
Features:
- Provides a 4-way flat trailer connector at the back of your Honda Pilot to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Ensures that your Honda Pilot's wiring matches that of your trailer
- Works with 2-wire, 3-wire and pulse-width modulation (PWM) systems
- Connects directly to your battery to avoid overloading your vehicle's electrical system
- Constructed using surface-mount technology (SMT) for consistent, reliable performance
- Maximizes trailer light yield and intensity while producing minimal heat
- Ensures superior operation in rough road conditions
- Resists water and vibration thanks to potted enclosure
- Connects directly to your Honda Pilot's wiring with the included quick-splice connectors
- Color-coded wires and wiring guide ease installation
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage:
- Stop/turn lights: 5 amps per circuit
- Tail lights: 7.5 amps per circuit
- Limited 1-year warranty
Installation
To determine where to splice into your Honda Pilot's tail light wiring, you will need to consult the included instructions. Use the quick-splice connectors to attach the input wires of the tail light converter to the corresponding wires from your Honda Pilot. Once you've spliced in the converter, connect the included hot lead to the black wire and run it up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery.
Then locate a flat surface inside your Honda Pilot near the tail lights and adhere the black converter box using the provided double-sided tape. Find a raw metal surface to use as a ground point and secure the white ground wire using the provided ring terminal and screw. Finally, secure the converter wires to your Honda Pilot using the included cable ties.
It is recommended that you use a small amount of grease on the 4-pole connector to help prevent corrosion.
Powered Tail Light Converter with Surface-Mount Technology
Because most trailers run on a 2-wire system - wherein the brake and turn signals are carried on 1 wire - the signals from your Honda Pilot may have to be converted to be compatible with your trailer's wiring. If your Honda Pilot operates on a 3-wire system, which means that it has separate brake and turn signals, then those signals will need to be combined so that they run on 1 wire to properly activate your trailer's tail lights. This converter will also ensure that your trailer's lights illuminate fully, even if your Honda Pilot has pulse-width modulation (PWM) wiring. Note: This will not affect how the tail lights on your Honda Pilot operate.
This converter is a circuit-protected, battery-powered unit that bypasses the electrical routes that are used by a basic wiring harness. As a result, there is virtually no draw on your tail light circuits.
Curt builds each tail light converter using surface-mount technology (SMT). This method of construction involves soldering electronic components directly to the surface of a printed circuit board. SMT eliminates the need for leads, which are used in older through-hole technology. The result is a circuit board that is smaller yet provides more routing area and that offers superior performance, reliability and durability.
Circuit boards constructed using SMT have been shown to perform better under rough conditions with excessive vibration than those made using the through-hole method. And where would vibration be more likely to occur than in towing applications? Curt converters also produce less heat, leading to increased durability and longer life. In addition, lower levels of resistance ensure better performance, especially for parts that operate at higher frequencies.
Each Curt circuit board is made using high-quality components that are pieced together in the most technologically savvy fashion, leading to greater predictability and reliability in functioning.
59236 Curt Powered Tail Light Converter for 2-Wire, 3-Wire or PWM Systems - 4-Way Flat Harness
Replaces 59200
Compare to Tekonsha TK47FR
Installation Details
California residents: click here
Customer Satisfaction Score:
89% were satisfied with this product
11% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Too difficult to install
Customer Reviews
Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector - C59236
Average Customer Rating: 4.7 out of 5 stars (970 Customer Reviews)
Install a 4-way flat on your vehicle with this splice-in harness. Powered converter connects directly to battery to reduce strain on wiring. Potted, SMT construction boosts water and vibration resistance. Works with 2-wire, 3-wire, and PWM systems.by: Steve05/08/2023
So, video left out removal of plastic trays behind each wheel well. A small torx is required.
Per video my wiring on left side is correct Red to the Yellow/Black, Yellow to the Blue/Green. Test tool (as seen in video) shows nothing when brake pedal pushed; brake indicators on tester both light up when running lights are on, but the running lights indicator does not light up.
Blinker indicators on tester are correct.
Have done the training cycle 6 times, slowly.
Steve B.
5/23/2023
Hi. Turns out the video for the 2013 x3 is correct, for my 2017. Brake and tail lights on separate wires.
by: Vic Smith02/18/2024
2021 Ford Mustang Mach-E
For my application, a 2021 Mach-e, this required cutting and splicing into the LED tail lights. I went back to the interweb and ordered one that was plug and play and did not require splicing. Yes, there is a video where a guy identifies exactly how to install this particular kit on the Mach-e, but it was just a bridge too far for me. The plug and play wiring works great and was easier to install. The plug and play wiring took about 80% of the installation time, the hitch itself took about 20% of the install time.
Katrina D.
2/27/2024
I am sorry that this harness was a bit more complicated than what was expected to get installed. I would go with the plug and play all day. Unfortunately, the only harness we have for your 2021 Mach-E that is a plug and play option is part # TK24VR, which is currently on extended back order. This means, that we are waiting, but do not have a date that our shipment will be in, so we took the part off of the site for now.
by: Mark 05/10/2024
Kia
Installed easily. Kia should have a plug in option so that you don't have to run wiring all the way to the battery. But installed fine, well detailed by etrailer.
by: Jerry K03/16/2024
This works great and people can see the brakes turn signals and tail lights when we have the bikes on the back of the car. We put this on so we could plug a portable lighting system in for our bike rack.
by: Luke06/07/2024
After one year of use, the hitch receiver continues to hold up great. No rust, flaking, or any other signs of damages.
Install took longer than I was expecting, but doesn't it always?
by: Allen03/06/2024
2022 Kia Soul
I'm sure the wiring is fine. However, I bought from etrailer because the product support was supposed to be great. We can't figure out which wires to attach to. Yes, I've read instructions. Yes, I've used a multimeter and test light. Yes, I've posted in forums. Yes, I've spent hours looking online. No dice. I even had an electrician give it a go to determine what to splice. I'm injured so can't walk, making some direct instructions on which wires to splice more important at this time. I can't keep removing the lights, etc. and reinstalling them when I can't ID the correct wires. I told them this on the phone when I ordered. They seemed supportive. When I repeatedly asked for which wires to splice the response was something akin to, "We don't know. Figure it out."
Two thumbs down. Received great support from a different online supplier.
by: Chris03/22/2024
Terrible job packing hitch. See pics. Hitch has deep scratches through paint. Won't purchase from trailer again.
by: Michael 04/26/2024
Buick
I have a small convertible Buick. Almost no one would put a trailer behind this car. But I use it to pull my jet ski. It was great to have this connector. It works perfectly.
by: Robert 04/24/2024
Your installation video was great. I don't think I could have found the correct wires without it. The Curt instructions were not clear in determining which wiring scheme the Pacific has. I still don't know what PS stands for in their chart, but your video explained it nicely.
by: Gale 05/10/2024
I had this wiring harness professionally installed. Works as it should.
by: Daniel 05/14/2024
The product works great but the instructions were a little hard to follow for a newbie. I did eventually get it going but I needed to consult my mechanic (YouTube) to get it all figured out.
by: Dave N10/29/2023
2024 Kia Telluride
The wiring harness doesn't quite work as advertised. I followed the provided instructions. Now when I turn on the left turn signal on my 2024 Kia Telluride, the left side trailer running lights also flash with the turn signal. The right side turn signal works correctly. Harness installation was a huge PITA. I blame Kia for not having a plug and play like my 2022 Santa Fe had. I had to remove both tail lights, splice into the factory wiring then run a power wire from the rear to the car's battery in the front. Again, a huge PITA but that's Kia's fault, not etrailer. Except for those things, I would've given more stars.
Jenny N.
11/2/2023
Yes, I would say powered hardwire harnesses are a tough install. I want to help do little trouble shooting with you. Can you check the area where you grounded the wire to make sure that it is to bare metal. If it is a clean, metal location already, disconnect the ground wire and attach it to a long piece of wire. Run this wire to the vehicle's negative battery terminal for testing purposes. If this solves the issue, the ground wire can be permanently run to the negative battery terminal or moved to a new location. I am hoping that this will stop the left turn signal from flashing on the trailer.
by: Scott 05/20/2024
Overall easy to install. Takes a few hours. The instructions could use updating. Vehicle years and trims (bulbs vs led) had wire colors that didn’t match any instructions or videos.
by: Cynthia02/29/2024
2018 Volvo XC60
My son said this is the part I needed so I guess it's good but my son, the mechanic said it's not what I needed. I guess it was too much so need to return.
Katrina D.
3/7/2024
Sure! I've got your information sent over to customer service to get the return processed. Yeah, that is the only confirmed universal option that we have for your 2018 Volvo XC60, I wish it was a bit less expensive and that there was an easy plug and play option for your vehicle. Some mechanics do carry some OEM parts for trailer wiring for vehicles; maybe see if your son is able to help you find an OEM harness. It may be a bit expensive, but you could always reach out to a Volvo Dealership to get an OEM harness.
by: Mark N02/04/2024
What a great experience. The wiring harness kit was easy to install, and the people at etrailer were courteous and happy to answer my questions. They got right back to me and saved me lots of time. It’s very rare to get service like that anymore.
BTW, the unit works very well.
Thanks etrailer.
by: Mike 01/22/2024
Mercury
I received the Trailer hitch, and I was able to put on my 2011 Mercury
Marqui all by myself with the assistance of three jacks. I completed
the job in my garage at home. I did watch the videos on u-tube about
6X. I am very happy with the trailer hitch.
by: John 03/10/2024
It’s a great product. We pull the small trailer from California to Missouri. No problems at all just like factory.
by: Paul 04/29/2024
Honda Element
Worked as advertised. Used on a Honda Element. I would recommend to others.
by: Bill04/28/2024
Fantastic and great video by on how to B install
by: Philip 03/19/2024
2019 Ford Ecosport
A little tricky to install, but the videos they provide do a great job of explaining what needs to happen. (2019 Ford EcoSport.) The wire clips are a little finicky... had issue with one side, but managed to get it working.
by: Robert04/27/2023
2023 Hyundai Palisade
2023 Hyundai Palisades are unique. Your website indicates that this item works for the 2023 Palisade, but according to a lady in your office, it only addresses the lights on the trailer, but does not disconnect the automatic braking system built into the Palisade in the event of a rear end collision that applies the brakes when it senses an obstacle (read boat trailer). Very frustrating!
Jenny N.
4/28/2023
I have a fix for you. All you need to do is turn off that feature in the vehicle while towing. I have a Hyundai and you will just need to play around in the vehicle menu system to find it and turn it off. I recommend reading up in your manual the section on towing. There may be other features you have that you will want to disable.
by: Alexander 02/14/2024
Kia
If you need something trailer/towing related, e trailer has always been great for me. This product worked great for my 2024 Kia telluride xline trim.
by: Stephen08/26/2023
Once I understood I had a 2 wire system in my 2022 BMW X3 the installation went well. The green wire for the right tail light is too short and I had to splice on an additional 2' of wire.
by: Thomas 05/01/2024
Works great when installed correctly according to the instructions.
by: Doug05/08/2023
I installed this item on my 2023 Hyundai Palisade and it did not go very well. The blue wire connectors that came with it are terrible and should not be used. Taillight wires on vehicles with LED lights are extremely thin and the blue connectors do not pierce thru the insulation and into the wire. Over half of the lights didn’t work and I had to spend way too much time figuring out where the problem was and then making new connections. I cut and soldered the connections to get the lights working.
25
970
Show More Reviews
See what our Experts say about this CURT Custom Fit Vehicle Wiring
- Which Trailer Hitch and Wiring Kit Fits 1979 Buick ElectraFor your 1979 Buick Electra the Curt hitch part # C12009 is actually the correct fit and not the one you mentioned as it fits other vehicles that are much different. Then for a trailer wiring kit the Curt part # C59236 is the best option for you. For a ball mount then the part # C45522 is the correct one for the hitch mentioned. For hitch balls you'd want the part # C40018 for a 2 inch ball or part # C40001 for a 1-7/8 inch ball.
view full answer... - Trailer Hitch Receiver and 4-Way Wiring Harness Confirmed to Fit 2022 Volvo XC60 Recharge HybridYes, the Curt Trailer Hitch Receiver # C92WR is confirmed by Curt to Fit all trims of the 2022 Volvo XC60 including your recharge hybrid. I recommend installing the Wiring Harness # C59236 when you install the receiver. This 4-way connector will allow you to control the trailer lights.
view full answer... - 4-Way Vehicle Wiring Harness Needed For a 2022 Hyundai Santa Cruz SELThe are only 2 ways to confirm if the Curt T-Connector Vehicle Wiring Harness # CU94FR will fit your 2022 Hyundai Santa Cruz. First is by removing the underbody panel by the spare tire to see if there is a connector present. The second would be to contact your dealer with your VIN number so they can check the wiring schematic for your specific Hyundai to ensure the connector is present. If your Hyundai does not have the connector present you'll need the Curt Powered Tail Light Converter...
view full answer... - Will Stealth Hitches Hidden Trailer Hitch Receiver Fit 2023 Kia TellurideThe Towing Kit w/ Ball Mount and Trailer Wiring # 391CONVPT5L you were looking at is not an actual hitch. This is designed to be paired with the # 391KIATELL20 which fits your 2023 Kia Telluride and will allow the hitch to be used for towing. If you are wanting the Stealth Hitch then these come together with part # 391KIATELL20T. This includes the wiring and the ball mount. If you don't have to have a completely hidden hitch with a removable receiver on your 2023 Telluride, you might want...
view full answer... - Recommended Class III Hitch and Wiring for 2017 BMW X3For a complete setup to tow your ShoreLand'r boat trailer with your 2017 BMW X3 I recommend the following parts: -etrailer Trailer Hitch Receiver # e78AR -Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236 -Universal Installation Kit for Trailer Brake Controller # ETBC7 -etrailer Ball Mount Kit for 2" Hitches # 989900 The etrailer hitch # e78AR is a Class III hitch with a 2" receiver. It has a maximum gross trailer weight of 3,500 lbs which is more than enough...
view full answer... - Trailer Hitch that Fits 2023 Ford Escape HybridYes we do, the etrailer hitch part # e89YR is a confirmed fit for your 2023 Ford Escape Hybrid. If you were in need of trailer wiring too the Curt kit part # C59236 is a fit as well.
view full answer... - Parts Needed to Add Brake Controller to 2024 Lexus RX 350In addition to the Curt # C29VV and # C59236 for your 2024 Lexus RX 350 you will need a 7-way and the brake controller. I recommend the following: -Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires # ETBC7 -Redarc Tow-Pro Liberty Brake Controller - Dash Knob - 1 to 2 Axles - Proportional # RED24FR Once you get your 4-way installed the # ETBC7 will allow you to upgrade it to a 7-way. This comes with the wiring, adapter, breakers, and everything...
view full answer... - Availability of Wiring Harness for 2024 Hyundai Santa CruzTo power the lights on your trailer you need the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236. This wiring harness uses quick splices to connect to your signal wiring. It also has a powered converter that connects directly to your battery to reduce any strain on the vehicle wiring.
view full answer... - Recommended Parts to Tow a Trailer w/ Brakes w/ a 2024 Toyota Grand HighlanderTo install a 7-Way harness on your 2024 Toyota Grand Highlander you will need two separate wiring harnesses because they don't make just one that'll do the job. The first harness you'll need is either the Curt T-One Vehicle Wiring Harness item # C59236 if you have the tow package or item # C59236 if you do not. The item # C79VV is a custom-fit T-connector that plugs into your Toyota's wiring harness, which is located in your cargo area. The Curt item # C59236 is a universal option for...
view full answer... - Recommended Hitch and Wiring Harness for a 2024 Toyota Grand HighlanderTo add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item # C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. The Curt item # C26VV is a class III hitch with a 2" receiver. It has a 5,000 lbs towing capacity and a 500 lbs maximum tongue weight. I really like this hitch because the entire crosstube mounts behind the rear bumper leaving only the 2" receiver visible. This not only looks better but helps with ground clearance. To...
view full answer... - What Does the Curt Hitch Look Like When Installed on a 2024 Toyota Grand Highlander?I have attached a picture below of the Curt Hitch item # C26VV installed on a 2024 Toyota Grand Highlander. I really like this hitch because the crosstube installs behind the rear bumper leaving only the 2" receiver exposed. The Curt Hitch item # C26VV is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 5,000 lbs towing capacity and a 500 lbs maximum tongue weight. If you are planning on towing you will also need a wiring...
view full answer...
- Parts Needed to Add Brake Controller to 2024 Ford Bronco BadlandsAdding a brake controller to your 2024 Ford Bronco Badlands will require 4-way and 7-way wiring along with the actual brake controller. I recommend the following: -Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236 -Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires # ETBC7 -Redarc Tow-Pro Liberty Brake Controller - Dash Knob - 1 to 2 Axles - Proportional # RED24FR The Curt wiring harness will splice into your...
view full answer... - Recommended Hitch and Wiring for 2024 Nissan FrontierFor your 2024 Nissan Frontier I recommend the etrailer Trailer Hitch Receiver # e98869. This is a Class III hitch with a 2" receiver and a max gross trailer/tongue weight of 5,000/500 lbs. This hitch also features a matte black powder coat finish. The finish gives it an OEM look while hiding dirt and dings. It has a bolt-on installation and comes with a lifetime warranty. For a 4-way you can use the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236. This uses...
view full answer... - Wiring Harness for 2023 Chevrolet Equinox Without Factory Tow PackageSince you do not have the factory tow package on your 2023 Chevrolet Equinox you will need a universal wiring harness. There is not a plug and play option at this time without the tow package. You can use the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236. This will splice into your existing wiring and provide you with a 4-way to power your trailer's signal lights. Since it sounds like you will be towing you will also want a ball mount in addition to the...
view full answer... - Installing A 4-Way Connector To A 2022 Mercedes GLC300 So I Can Tow A Utility TrailerWe can get your 2022 Mercedes GLC300 setup to tow a utility trailer. You will need the Vehicle Wiring Harness Kit w/ 4-Pole Trailer Connector and Installation Kit, part # C59236. Once you add this harness kit you will be able to plug a utility trailers 4-way connector to your vehicle's 4-way connector. Then your trailer's lights will mirror your vehicle's stop, turn, and running lights while the trailer is being towed. This wiring harness can work with incandescent bulbs or LEDs.
view full answer... - Correct Ball Mount for Curt Trailer Hitch Receiver 11307 on 2010 Cadillac CTS SedanFor a Class I hitch that fits your 2010 Cadillac CTS such as the Curt Trailer Hitch Receiver # C11307, the hitch manufacturer specifies the exact ball mount that you will need to use with the hitch. For this hitch, the one that Curt specifies will be plenty long enough at 11-1/4 inches long, the Curt Drawbar # C45522. With this ball mount you will also need the Pin and Clip # C21410 and a hitch ball (which depends on the size of your trailer's coupler), either 1-7/8" Hitch Ball # C40001...
view full answer... - Trailer Hitch Receiver to Fit a 2018 Nissan Titan SVThe hitch receiver you're looking for that fits your 2018 Nissan Titan SV is the Curt # C13304. The other Curt hitch you mentioned, part # 13575 does not fit and is actually for specific model years of the Mazda CX-9. I've linked an install video of the correct hitch being installed onto a 2017 Titan SV for you. The process is the same. If you're going to be towing a trailer you also need wiring to power its lights. Part # C59236 is a universal 4-way that works with your Nissan. As...
view full answer... - Curt Trailer Hitch Receiver Compatible with 2009 Volkswagen CCThe Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11091 is a confirmed fit for a 2009 Vokswagen CC excluding the 4Motion. Drilling will be required as well as fascia trimming. It will take approximately 40 minutes to install. If you want trailer wiring for towing or for accessory lighting I recommend the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236 which is confirmed to work with your car. If you will be doing light towing, I also recommend...
view full answer... - Trailer Wiring Harness Recommendation and Installation Process on 2011 BMW X5 Of the three 4-pole wiring harness products made for your 2011 BMW X5 the Curt harness # C59236 is a good choice for its higher maximum current output, which is 5-amps for each stop/turn circuit and 7.5-amps for the running lights. I linked an article that will help you with the routing of the harness 12V power wire which is where it will draw its actual power for your trailer lights. I also linked a video (showing a different harness) and your installation for the Curt will be identical...
view full answer... - Is Drilling Required For Installation Of Trailer Hitch On 1994 Ford ExplorerAll of the trailer hitches offered for your 1994 Ford Explorer do require drilling. I recommend the Draw-Tite Max Frame Trailer Hitch, part # 75096. This is a Class lll hitch and it has a 2-inch receiver opening. Per the attached instructions you will use the hole in the trailer hitch bracket as a template and drill a 1/2-inch hole in the vehicle frame rail. This trailer hitch has a 5,000-lb towing capacity but you will want to check your owner's manual or with a dealership to make...
view full answer... - Parts Needed to Install Brake Controller in 2008 Kia Sorento without Trailer WiringYou will need to start with a 4-way (if you do not have one). For that you would want the # C59236. From there you would need to convert the 4-way to a 7-way so that you can install the brake controller # 39523. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached installation instructions and an install video for this product as well.
view full answer... - Parts Needed To Install a Trailer Mounted Trailer Brake Controller and 7-Way on a 2013 BMW X3 I have another recommendation for you as both the Tekonsha ZCI and Prodigy RF are on an extended backorder and we are not sure when we will start seeing them come in again. First you will want to start by installing the Curt 4-Way # C59236 on your 2013 BMW X3 xDrive28i. Then you will need the 7-Way Kit # ETBC7L for connecting your camper with electric brakes. This kit allows you to connect to the 4-way but also includes wiring for a charge line which will provide power for the braking system...
view full answer... - What Trailer Hitch Fits 2024 Chevy TraxI checked with our manufacturers for you, and was able to verify a fit for a trailer hitch on your 2024 Chevy Trax. The hitch is made by Curt and the correct part number is the following: - Curt Trailer Hitch Receiver # C75VV If you'd like to add a 4-way you can do so with the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236.
view full answer... - 2006 Toyota Tundra Trailer Hitch and Wiring RecommendationsI'd be happy to help you out! Here are the parts I recommend for towing a trailer with your 2006 Toyota Tundra: - etrailer Trailer Hitch Receiver # e87KR - Curt Powered Tail Light Converter # C59236 - Mounting Brackets # 18144 and # 18136 If the trailer you need to tow is a little more on the heavy side then you also need a brake controller and for that I recommend the following: - Universal Installation Kit # ETBC7 - Redarc Tow-Pro Liberty Brake Controller # RED24FR - Wiring Harness...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Used Items Available
Condition: Like New
Notes: May have damaged packaging or minor cosmetic blemishes.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Edited by:
Lindsey S
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Jonathan Y
Video Edited:
John S
Video by:
Kathleen M
Video by:
Zach D
Video by:
Michael B
Video by:
Jacob H
Video by:
Aidan B
Video by:
Thomas T
Video by:
Ethan H
Installed by:
Cole B
Updated by:
Wilson B
Updated by:
Jenny M
Updated by:
Kristina F
Updated by:
Isabelle B
Written by:
Kristen H
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Ryan G
Test Fit:
Clayton O
Test Fit:
Bradley B
Test Fit:
John A
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina B.
5/16/2023
You will need to double check and make sure that your ground wire is attached to a clean metal surface. If you are grounded properly, and still have no lights, then you will want to test the converter box itself. If you are receiving power to the box and nothing out of the box, then it is possible that you have a defective box.