Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors

See what our Experts say about this CURT Custom Fit Vehicle Wiring

• Availability of a Replacement 7-Way and 4-Way Trailer Connector for a 2008 Ford F-250 Super Duty
  There are a couple of options for 7-Way and 4-Way connectors that you can use for a 2008 Ford F-250 Super Duty. First, you could use # 30955 that you have referenced. It fits 1997 to current Ford full size trucks. You can also use Replacement Multi-Tow 7-Way and 4 Pole Trailer Connector, # C55774. Both of these connectors come with a mounting bracket so they will not fit in the exact same place as the original 7-Way, but they will plug in to the factory wiring harness.
  view full answer...
• Is Hopkins Endurance Multi-Tow Twist-Mount Correct Replacement for 2007 Nissan Titan Connector
  As long as you have the US Car Connector on your 2007 Nissan Titan then the Hopkins Endurance Multi-Tow Twist-Mount 7-Way RV and 4-Way Flat Trailer Connector # HM40920 will fit and work perfectly! Some other poplar options are the Curt T-Connector # C55774 and the Hopkins # HM40975. Both of these install using the same connector as the part you mentioned. The only difference is that the Hopkins you referenced is typically if your pickup has a cutout in the bumper area (see attached photo)...
  view full answer...
  
• What is the Correct Replacement 7-Way Trailer Connector for a 2002 Ford Expedition
  We do have a replacement 7-Way for the 2002 Ford Expedition. You can use # C55774. The 4-Way wiring harness, # 118344 would be for a vehicle that did not come with any wiring harness. And # 118242, is a fit for certain model and year F-150 and F-250 trucks.
  view full answer...
• Easiest Trailer Wiring Solution for 2018 Jeep Grand Cherokee with OEM Wiring Present
  If it was my vehicle I would go with the factory tow package 7-way and 4-way wiring kit part # C55774 that you referenced since you have the connector present for it already. There's a good chance the wiring is already active too but at worst a trip to a dealer to have them reflash the computer would be super easy as well. The T-one style kits aren't terrible but if you have the wiring already present the route mentioned would be super easy and gives you both styles of trailer wiring.
  view full answer...
• Correct Wiring Harness for a 2004 Ford F-150 Lariat
  The Curt T-connector vehicle wiring harness for factory tow package 7 way and 4 pole flat connectors # C55774 is a confirmed replacement and fit for your Ford F-150 Lariat. It connects quickly and easily with no cutting or splicing of wires. The mounting bracket and hardware are included. It does feature the round plug that your 2004 F-150 has. This custom-fit connector plugs into your vehicle's factory tow package wiring harness, which is located behind the rear bumper, on the driver's...
  view full answer...
• Replacement 7-Way Trailer Connector for 2015 Ford F-150
  It sounds like you have the factory 7-way on your 2015 Ford F-150 and only want to replace the cable that connects your 7-way socket like # HM40975 to the tow package wiring. If you are willing to hardwire in your socket you can get that with the 4' Pigtail Wiring Harness # PK11998. You would also need Heat Shrink Butt Connectors # DW05745-10. I have added a link to an install for you to check out. Otherwise, you can simply replace your entire 7-way with the Curt T-Connector Vehicle...
  view full answer...
• Recommended Brake Controller and 4-Way/7-Way Connector for 2018 Toyota 4Runner w/Tow Package
  The brake controller that I recommend for your 2018 Toyota 4Runner with the Tow Package is the Redarc Tow-Pro Elite # RED44FR because of how easy it is to use, the versatility in mounting locations, and the wide variety of towing applications it can accommodate. To connect this to your 4Runner you just need the adapters # 3040-P and # 331-TPH-017. The control box for the Tow-Pro Elite is able to sense the motion of the vehicle in any orientation and then the extra slack in the wiring harness...
  view full answer...
  
• Pigtail Length Of Curt T-Connector Vehicle Wiring Harness for Factory Tow Package
  I went to the warehouse to measure and the 4-pole pigtail part # C55774 measures about 18 inches from the back of the 7-way plug to the end of the 4-way connector adapter piece so you shouldn't have any issues plugging in your 4-way. The wiring of the 4-pole connector that sticks out of the wire loom is about 6-1/2 inches. The overall length of the wire loomed wiring from the back of the 7-way plug to the end of the connector that plugs into the vehicle's factory port is 15-3/4 inches.
  view full answer...
• Recommended Trailer Connector for 2019 Ford Ranger with 4 and 7-Way Plugs
  The Curt T-Connector Vehicle Wiring Harness part # C56431 is an excellent option for a 2019 Ford Ranger. It comes with a 7-way trailer connector so in order to add a 4-way as well while keeping the 7-way you'd need to replace the trailer connector that comes with using the Curt T-Connector part # C55774 and then you'd be set since it also comes with a mounting bracket.
  view full answer...
• Fixing Factory Trailer Wiring On 2004 Nissan Titan That Has Been Cut Off
  Depending on how far they cut back at the factory tow package, you may be able to just a 7-Way plug like part # C55774. If they just cut off the 7-way plug but not the OEM connector port under the bumper this will work. I have attached a photo of what you will need to look for. You did say that your truck came with a factory wiring harness but if you do not have the two relays behind the panel on your dash board to the left of your steering wheel then you will need to add those from the...
  view full answer...
  
• Trailer Wiring Harness Recommendation for 2020 Jeep Grand Cherokee with Factory Tow Package
  For your 2020 Jeep Grand Cherokee with the factory tow package the trailer wiring harness I recommend is the # C55774 as it comes with a 7-way and a 4-way so you'd be able to tow basically any trailer you'd encounter since these are the two most common types. I attached an install video for this on a similar 2018 Grand Cherokee for you to check out as well.
  view full answer...
• 7-Way/4-Way Trailer Wiring Connector for 2011 Honda Pilot
  I have a way to install a 4-way and 7-way on your 2011 Honda Pilot but you'll need to first start with the 7-way kit part # 118253 which you mentioned. This gives you a standard 7-way wiring but then you'd need to replace the 7-way socket with a Hopkins part # 30955 and you have the combined 4-way and 7-way you are looking for.
  view full answer...
• Curt Hitch for my 2018 Chevrolet Colorado
  The correct Curt hitch for you 2018 Chevrolet Colorado is the Curt Trailer Hitch Receiver part # C13203. The part # C13902 is not a fit. If you need wiring use the Curt T-Connector Vehicle Wiring Harness part # C55774 this will give you both a 4 way flat and a 7 way round plug that will fit a wide variety of trailers. A great ball mount kit that covers a lot of different drops and rises is the etrailer ball mount kit part # 989900
  view full answer...
• How Can I Plug A 5 Pin Round Plug In To A & way Plug?
  I do have a potential solution for you, but we do not carry an adapter that will work with a 5 pin round plug. In this day and age the 5 pin round is very uncommon. The best solution we can offer would be to do away with the 5 pin round and replace it with a 7 way like part # H20043. It should be fairly easy to swap out, you would just need a few butt connectors # DW05745-5.
  view full answer...
• Lights Do Not Work With One Vehicle Only, a 2015 Chevy Traverse
  Thank you for your purchase directly from etrailer of the 7-Way Trailer Adapter for Towing Trailers with LED Lights # C57003. If this did not fix your issue on your '15 Traverse, and the trailer works find on your other vehicle, we know the issue is on the Traverse. Sine you already checked the fuses, the next thing to do is use a circuit tester to test the connector on your vehicle after disconnecting it from your trailer. Check the wiring going into your connector from your tail lights...
  view full answer...
• Troubleshooting Trailer Turn Signals and Reverse Circuits on 2013 Ford F350
  If the fuses aren't blown, there could be some corrosion in the trailer connector on the truck preventing the signal from getting through. If you can see green or white corrosion on the pins, there's a chance the corrosion has spread to the interior of the connector and damaging it. Try testing the wires feeding the connector itself to ensure that power is reaching the connector when the turn signals are activated, which would confirm or rule out the connector as being the problem. If power...
  view full answer...
• No Power to 12 Volt on 7-Way of 2019 Ford Expedition
  If you are getting no power to the 12 volt pin on the 7-way of your 2019 Ford Expedition, and have checked to ensure the fuses are good, there are a couple of other things to take a look at. One is simply faulty wiring, so you'll need to do the best you can to go over the wires and see if there are any that are broken, crimped, or otherwise damaged. Also check that the harness is fully plugged into the tow package plug. And finally check your 7-way connector for damage. If you can't...
  view full answer...
• Can I Use Both the 7-Way and 4-Way Connectors at the Same Time on a 2015 Chevrolet Silverado
  You can use a 7-Way and 4-Way connector at the same time just as long as you are not overloading the light circuits. If your camper has a lot of outside lights like running lights, and brake/stop/turn lights then the lights that perform the same functions on your boat trailer might be a little dim or the fuses might blow on those circuits. For a 7-Way and 4-Way connector that you can use at the same time I recommend using the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package...
  view full answer...
• Does Curt 7-Way and 4-Way # C55774 Fit 2017 Nissan Titan SV Crew Cab
  Curt has verified that their 7-way and 4-way part # C55774 is a fit for your 2017 Nissan Titan SV crew cab. Basically it just plugs into the 7-way wiring you have at the rear of your truck and then gives you both style of connectors. The mounting bracket is designed to attach to a lower bumper or fascia though and shouldn't be attached to the hitch as that would void the hitch warranty to drill into it.
  view full answer...
• Troubleshooting No Turn Signal on 7-Way of 2003 Ford F-350
  It's gotta be the wiring to that pin on the 7-way. You might check to see if you can find any corrosion or cut/exposed wire on the backside of the 7-way and fix as needed. It could be an internal issue with the 7-way which you could replace with the part # C55774 and you'd be set.
  view full answer...
• Towing a Trailer with a 2018 GMC Yukon
  I can help you with what you need to tow a trailer with your 2018 GMC Yukon, but from my research we do not carry a hitch for that vehicle because they include a factory trailer hitch. Your vehicle likely came with a factory tow package hidden under a cover in the center of the rear bumper. You should be able to remove that cover to reveal the trailer hitch receiver. You may also want to double check if your vehicle came with a wiring harness. We offer several quality wiring harnesses...
  view full answer...
• Does a Hitch With a Higher Capacity Than the Tow Vehicle Increase Towing Capacity
  When it comes to towing components like hitches, you're always going to be limited to the capacity of your lowest rated components; so adding a higher rated hitch to your vehicle isn't going to increase your towing capacity or the payload. From what I was able to determine with my research, the towing capacity of your 2015 Chevy Silverado 2500 HD with a 6.0L engine is 13000-lbs and the payload capacity is going to be somewhere between 3000-lbs and 3500-lbs depending on your trim package....
  view full answer...
• Brake Controller for 2002 Chevy Silverado Not Getting Power
  If the lighting functions on your trailer connector are are functional, you'll probably need to install missing fuses in the power distribution box under the hood. On the inboard side of the fuse box, there are two threaded studs. The one closest to the cab powers the brake controller, which should have a 30 amp green fuse installed directly next to it. The stud closest to the front bumper should have an orange 40 amp fuse installed in the location directly next to it which powers...
  view full answer...
  
• Recommended Trailer Hitch Receiver and Wiring for 2005 GMC Sierra 3500
  Your 2005 GMC Sierra 3500, if you can handle a towing rating of 16K then I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" # C15312. If you need the larger capacity then you will need the Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" # C15703 but you will use a different ball mount or likely weight distribution system shank for this hitch. For your wiring, I recommend the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package...
  view full answer...

Do you have a question about this Custom Fit Vehicle Wiring?