bing tracking image
  1. Custom Fit Vehicle Wiring
  2. Chevrolet
  3. Silverado Classic
  4. 2007
  5. Tekonsha
FITS 2007 Chevrolet Silverado Classic
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Item # 118384
Retail:$50.54
Our Price: $37.16
You Save: 26%
Custom Fit Vehicle Wiring
Confirmed to Fit
2007 Chevrolet Silverado Classic

with factory 7-Way

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
In Stock
Tekonsha Custom Fit Vehicle Wiring - 118384
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Call etrailer.com at 1-800-940-8924 for expert service. We are your Chevrolet custom fit vehicle wiring experts, and offer a great price. etrailer.com carries a complete line of Tekonsha products for your Chevrolet Silverado Classic 2007. T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part 118384 from Tekonsha can be ordered online at etrailer.com. Complete custom fit vehicle wiring installation instructions and technical support.
  • All Info
  • Reviews (449)
  • Q & A (0)
  • Photos

2007 Chevrolet Silverado Classic - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

  • Custom Fit
  • 4 Flat
  • Trailer Hitch Wiring
  • Tekonsha
  • No Converter

Quickly and easily install a 4-way trailer connector on your Chevrolet Silverado Classic. This T-One typically plugs directly into the back of your factory-installed 7-way connector so you can retain the 7-way and also pull a trailer that has a 4-pole flat.


Features:

  • Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
    • Retains functionality of factory-installed 7-way, RV-style connector (if present)
  • Connects quickly and easily - no cutting or splicing of wires
    • Locate connection points behind rear bumper
    • Plug in T-connector
  • Constructed of 16-gauge bonded wire
  • Comes with dust cap for 4-way flat connector


Specs:

  • Maximum amperage: 7.5 amps per circuit
  • 1-Year limited warranty


Installation

This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the rear bumper. If you have a factory-installed 7-way, blade-style connector, the T-One will plug in between the 7-way and the OEM socket.


Once installation is complete, the 4-way flat connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.


It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.



118384 Tow Ready T-1 T-Connector - 4 Wire

Installation Details 118384 Installation instructions

California residents: click here


Customer Satisfaction Score:


Customer Reviews

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118384

Average Customer Rating:  4.8 out of 5 stars   (449 Customer Reviews)

Quickly and easily install a 4-way trailer connector on your vehicle. This T-One typically plugs directly into the back of your factory-installed 7-way connector so you can retain the 7-way and also pull a trailer that has a 4-pole flat.

by:

The adapter fit perfect was easy as 123 to hook up. I'm glad I didn't cut into wires to install the LED light bar. Unplug the 7 pin plug and plug in the adapter.



by:
2011 ChevroletSilverado

I used this harness to add a tailgate strip light to my 3011 Silverado. The whole process including installing the light strip took 45 minutes. The harness plugged in in minutes and works beautifully.



by:
2013 GMC Sierra

Have been looking for a T-connector for my trailer lights for two years. Truck has a seven pin connector built-in. Wanted my GMC emblem to light up when the breaks are applied. Was getting ready to cut and splice wires when I looked on the internet and learned about etrailer.com. Found the T-connector I needed. Took 5 days to arrive after ordering, and 5 minutes to install. Works great !



by:

Just what I needed .... perfect fit!!

Charlie N.

5/6/2024

Still working great ... use it everyday!



by:
2012 Toyota Tundra

I have a 2012 Toyota Tundra and I recently bought a pre-owned Leer camper shell. I used this harness to wire up the third brake light. I also used the brake light module. This setup worked perfectly and resulted in a neat and clean professional installation. Thanks etrailer, you had everything I needed for a successful prefect installation.

Ron G.

7/13/2023

I installed this unit on my truck one year ago. It was perfect then and it is still working perfectly without issue.



by:
GMC Sierra

Perfect fit for 2022 Sierra GMC . This leaves your 4 pin vacant to plug in your boat trailer etc



by:

Slow start to a good impression but everything worked out.
1. It started with a delivery delay; I live two hours from the manufacturer but it took 3 weeks to get me my harness. When the error was found they over-nighted the harness to me.
2. The wiring in the harness was loose and would lose connection, disabling the lights. Pushing a connector back in to place, crimping it down and wrapping it in electrical tape solved that issue.
That was a month into owning the harness. It's been a year now and I've had no problems. I'm pleased with the compatibility and ease of which it took to install.

Don M.

5/11/2023

The harness has held up great. Needed no adjustments after original installation.



by:

Exactly as described, wires in nicely, has been working flawlessly since the installation!



by:
2016 Jeep Grand Cherokee

Purchased this hitch for my new 2016 Jeep Grand Cherokee Laredo online after being quoted a $700 installation price at my local Chrysler Dealership. After doing some online searching and reading multiple reviews I decided to give these folks a try. My husband and I watched a very detailed video explaining 3 different hitch options for my Jeep and quickly decided for the price it was worth giving it a try. From opening box to install was less than 20 minutes that included connecting trailer light kit that I purchased extra $$.$$. You can barely see it under my JEEP. I'm very pleased and can't hardly wait to use it. Thanks again etrailer.com you helped me prove my to my husband that it would work and saved me $600!



by:

Search hi and low to find what I needed or even for someone who even understood what I needed. I had no luck until I search on etrailer.com. They had exactly what I was looking for. Ordering was simple and delivery was quick. They even check in with me before durning and after shipping. I love this site. I'll definitely shop here first next time.



by:
2016 Jeep Grand Cherokee

I purchased a trailer hitch (C13182) and wiring adaptor (T-One 118384) for my 2016 Grand Cherokee. Received it within a few days and fit was perfect! Only took all of ten minutes to install with the help of my 5 year old. Thank You!



by:
2014 Jeep Grand Cherokee

Bought a trailer hitch, and wiring harness for my 2014 Jeep Grand Cherokee. etrailer was fantastic, right on the money with the videos and it was very helpful in choosing the right hitch. Very easy to install.



by:
2024 Ram 2500

Perfect fit.



by:

Website very easy to operate and fubd exactly the right part to fit my truck/trailer !!! Videos were very helpful even telling me what sockets and wrenches I needed to complete install by myself and Im a carpenter not really mechanically gifted. Will definitely use etrailer.com again without hesitation!!



by:

TRAILER WIRING HARNESS WENT TOGETHER REAL GOOD. IT ONLY TOOK A VERY LITTLE TIME TO INSTALL. THIS MADE INSTALLING MY LED BRAKE LIGHT KIT VERY EASY.



by:
2014 Jeep Grand Cherokee

Fit just like it should, engages securely and performs correctly. Nothing else I can ask for



by:

World class customer service



by:

great trailer hitch at fair price.



by:

Always worked for me when purchased in the past so I didn't expect anything less this time.

Reginald W.

8/20/2023

Ive had no problem with this item even thru a harsh winter use. Just make sure you use a little diox grease on the electrical pins so moisture doesnt ruin the contact

Etrailer Expert

Mike L.

9/13/2023

@ReginaldW Good advice, dielectric grease like # 11755 does a great job of keeping moisture out of your electrical connections.


by:

Excellent product and easy to install! Finished up the installation with products 118144 and 118140 for a clean looking install.



by:

Installed myself in about 30 minutes. 06 Silverado crew cab. Fit right up to factory fitting that was hidden up on top of the spare tire.



by:

Fit perfectly, and the [online] video was very helpful



by:

Works perfectly



by:
2017 Jeep Grand Cherokee

I recently purchased a new 2017 Jeep Grand Cherokee. However, the vehicle was not equipped with with a trailer hitch but came pre-wired for trailering. I asked if the dealership could install a hitch/wiring and was informed that they subcontract the work to a local trailer rental company. I went to the company and was told it would cost approximately $400 and I would have to leave my vehicle with them for four hours, which would have been very inconvenient because I live 50 miles away. As a result, I researched alternatives online to see if I could install the hitch and wiring myself. etrailer.com had the best customer reviews and help videos, so I placed an order for the hitch and wiring harness. My wife and I installed them yesterday, which took about an hour. I saved $270 from what the trailer company was going to charge me. Very happy with the purchase.

Gary G.

4/28/2018

Working fine.



by:

Easy to use web site - got the correct part - I have already ordered more parts - this time for my trailer!!! I will always choose etrailer for my parts

Frank

1/30/2023

It was so easy to install and I have not had any issues with it. Best add on I ever added!!!


25
449
Show More Reviews

See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring

  • Recommended 4-way Flat Connector For 2007 GMC Sierra
    To install a 4-way connector on your 2007 GMC Sierra I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118384. This will plug into the round black connector on your truck. I included a video of the # 118384 being installed for you to take a look at.
    view full answer...
  • Can I Add An Additional 4 Flat Plug To My 2019 Ram 1500
    Yes we have just the thing. To add on an additional 4 flat plug, you can use the Tekonsha # 118384. This will plug in line behind the factory 7 way plug and allow you to connect your additional lighting.
    view full answer...
  • Trailer Lights and Fuse Problems for a 2010 Chevrolet 2500 HD Trail Lights Blowing Fuses
    Since you have connected other trucks to your trailer and do not see the same problem, lets isolate the truck from the trailer. Inspect the connection at the vehicle for any loose connections, damage to any connector pins or wires associated with the trailer wire connection. You can use a circuit tester, I would recommend # PTW2993, to make sure that there is power being properly delivered to the trailer by your connector. I have included a link to the circuit tester kit part, a video link...
    view full answer...
  • Will the Primus and P2 Brake Controllers Work with Standard Electric Brake Systems on a 2011 Tundra
    The Tekonsha Prodigy P2 Brake Controller, item # 90885, will work with both standard electric trailer brakes, and electric over hydraulic braking systems. I have attached a link to instructions for you to review. The Tekonsha PRIMUS IQ Brake Controller, item # TK90160, is not designed to work with electric over hydraulic braking systems, but will work great with standard electric trailer brakes, see instructions link. The P-3 brake controller is also compatible with both standard electric...
    view full answer...
  • Hitch Recommendation For a 2010 Dodge Ram 2500 Mega Cab With a Factory Installed Hitch
    You might want to check the hitch on your 2010 Dodge Ram 2500, but it is usually welded on to the frame of your vehicle. It would be very difficult to remove. I would recommend the Curt Class V 2 Inch Hitch, part # C15409. This hitch has 17000 lbs towing weight capacity and 2550 lbs tongue weight capacity. If you will be towing with the Curt hitch you will also need the Draw-Tite Ball Mount, part # 40331, the part # PC3 Pin and Clip, and the hitch ball. Depending on the coupler size...
    view full answer...
  • Adding 4-Pole Trailer Connector to 2009 GMC Sierra Equipped with Factory 7-Way Connector
    There's a few different ways you can do this. For the easiest choice, you can use a simple adapter like # PK12716. Simply plug it into the 7-way then plug the 4-pole connector for the trailer into the adapter. Another option would use the # 118384 4-pole connector. This 4-pole would plug inline between the vehicle wiring harness and the twist-in # PK11916 7-way. This would provide you with an always functioning 4-pole connector, and you wouldn't need to fool with an adapter.
    view full answer...
  • 2004 GMC Sierra Not Sending Current to Trailer Tail Lights
    I recommend testing the ground connections on the vehicle and the trailer. When you find that some of the lighting functions work, but not all of them, it is always best to check the ground connections. Check the ground on the connector on your vehicle to make sure it is attached to a good, clean ground on the vehicle frame. Also, check the ground on the trailer connector which should be attached to a good, clean ground on the frame of the trailer. Next we will check the fuse for the...
    view full answer...
  • Connecting 3rd Brake Light in Leer Cap to 2019 Ram 1500
    Actually, the correct part to wire in a truck bed cap's third brake light is the converter # PP20-702. Since your 2019 Ram's turn signals and brake lights run on one circuit this separates them so the light on the cap functions with just the brake lights. Each yellow wire connects to the truck's brake light/turn signal circuits, one on each side, and then the green wire goes to the third brake light. You can use the truck's trailer wiring to find the proper brake and turn signal circuits....
    view full answer...
  • Comparing Diesel vs Gas Engine for Jeep Grand Cherokee to Tow Trailer
    I took a look at the online version of the owner's manual for the 2014 Jeep Grand Cherokee and it appears the actual towing capacity won't differ between the gas or diesel engine, as you are looking at a 6,200 pound limit for either option. The benefits then for a diesel engine over a gas is more power and low-end torque which in real life situations just means the Jeep's going to "feel" a bit more powerful when pulling a heavier trailer, especially when traveling through rough or hilly...
    view full answer...
  • How to Install 4-Way Trailer Connector on 1999 Chevrolet Silverado 1500 with Factory Tow Package
    The Tow Ready T-One Wiring Harness, part # 118315, is for the 1988 to 2000 Chevrolet C/K Series trucks. It is not for the 1999 Chevrolet Silverado 1500. The 1999 Chevrolet Silverado 1500 would use either the Tow Ready Wiring Harness, part # 118384, which is used if you have a harness that is located under the vehicle, behind the bumper, on the driver’s side of the vehicle. The wiring harness # 118384, is meant to plug in line with the factory wiring and provide a 4-Way flat connection....
    view full answer...
  • Is Any Trimming or Cutting Needed when Installing Draw-Tite # 75699 on a 2011 Jeep Grand Cherokee
    The installation of the Draw-Tite Class III 2 Inch Hitch, part # 75699, on a 2011 Jeep Grand Cherokee Limited will not require any cutting or trimming of the plastic fascia in the rear of the vehicle. It will use existing bolts and weld nuts on the vehicle. I am including a link to the installation instructions on the Hidden Hitch. To complete your towing setup, you will need the following items: Draw-Tite Ball Mount, part # AMSC2 Pin and Clip, part # PC3 Tow Ready 2 Inch Hitch Ball,...
    view full answer...
  • Compatibility of LED Hitch Cover FHG72VR with Wiring Harness 118384 on 2012 Chevy Colorado
    The Flint Hill Goods Square LED Brake Light Hitch Cover for 2" Hitches # FHG72VR would indeed be compatible with the # 118384 on your 2012 Chevy Colorado. Using the turn signals will not cause the hitch cover to blink. The cover will light when the head/ running lights are on and will then brighten when the brakes are applied.
    view full answer...
  • Recommended Brake Controller Wiring Harness For 2007 Chevrolet TrailBlazer
    If your 2007 Chevy Trailblazer already has a 7-way trailer connection at the rear, then there is no plug is present under the dash, but the needed wires are already run. You will connect the brake controller wiring with the vehicle wiring already present under the dash. I've attached a video of this installation on a 2005 Trailblazer for you to check out. If you don't have a 7-way, the kit you need to install a brake controller is the Universal Installation Kit for Trailer Brake Controller...
    view full answer...
  • Adding a 7-Way Trailer Connector to a 2013 Ford F-150 that Came with Factory 4-Way Flat
    Your 2013 Ford F-150 must have come with the factory 4-Way connector. Since the harness for that connector uses a square plug and not the round plug, a simple plug and play 7-Way is not available. You will have to partially hardwire in a 7-Way using # 37185. I have included a link to a video that shows how this is done on a 2013 Ford F-150.
    view full answer...
  • Troubleshooting Trailer Turn Signals Malfunctioning with 2007 GMC Acadia with 4-Pole Wiring
    The problem you describe, both trailer turn signals activating when either turn signal on the Acadia is engaged, is typically a grounding issue. Since you have already re-worked both the vehicle and trailer main grounds to ensure both are solidly connected to clean bare metal surfaces, then the most likely cause for the problem is either a bad wiring harness on the Acadia or some issue with your adapter. I could not find purchase history to let me see the specific wiring harness and adapter...
    view full answer...
  • Troubleshooting 2014 Ram 3500 Trailer Brake Controller Not Sending Power To Trailer Brakes Suddenly
    I would be happy to help! First things first using a circuit tester like # PTW2993 test the 5 o'clock pin on your 2014 Ram 3500's 7-way connector while a friend applies the manual override to the controller. If you are getting power, there then this means the issues is between your trailers 7-way connector and the brake magnets. You will want to check all of this wiring for any damage and replaced damaged sections with # 10-1-1 and heat shrink butt connectors # DW05745-5. If you do NOT...
    view full answer...
  • Troubleshooting 2006 Chevy Silverado with Trailer Left Turn and Brake Not Working
    If you installed the Tail Light Converter with 4-Pole Flat Trailer Connector # HM48925 you asked from it is not a fit for your 2006 Silverado. That harness is only a confirmed fit for a 2002-2004 Isuzu Axiom. It is likely that it won't work properly on your vehicle. If you are using the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118384 which is a fit for your truck, then you may have a bent pin or a bad fuse. No converter is needed for your trailer wiring. ...
    view full answer...
    Image 1 for Image 2 for
  • How To Find Where the Trailer Running Light Relay Is Located On a Vehicle with Factory Wiring
    I am not sure what vehicle this is in reference to but in order to find out where your trailer running light relay is located you have two options. The first option is to check your copy of the owner's manual to see if it is listed here. If it is not listed in your copy of the owner's manual then you will need to check the underside of the lid for the engine bay fuse box. If you can provide me with the year, make, and model of the tow vehicle I can then look this up for you if listed in...
    view full answer...
  • Keep Blowing 20 Amp Running Light Fuse when Connecting Trailer to 2012 Ram 5500
    There is a short circuit somewhere that is causing the fuse to blow. A short would cause excessive power draw. Since it only happens when you plug in a trailer it is likely that the short is in the trailer connector or the wiring to it. You will need to make sure that there is no corrosion build up on the pins of the connector but also on the inside of the connector where the wires attach. Also check for any frayed or pinched wires touching metal and fix as needed.
    view full answer...
  • Where to Find Connector for Installing Brake Controller in 2010 Lexus GX460
    To install a brake controller in a 2010 Lexus GX 460 the correct install harness is the part # 3040-P. This adapter plugs into the 5-pin connector on your vehicle's built-in brake control wiring harness. The harness is located underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal. For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well...
    view full answer...
    Image 1 for
  • Adding 4-Way to 2023 Honda Ridgeline with 7-Way
    The easiest solution would be to use the Tekonsha kit part # 118384 which would plug inline with the 7-way you have now and give you a 4-way that when not in use could be totally hidden.
    view full answer...
  • 4-Way Wiring Harness For 2012 Jeep Liberty
    If you do not have a 7-way connector at the rear of your 2012 Jeep Liberty, I recommend the Tow Ready Custom Fit Vehicle Wiring, part # 118554. This requires no splicing or cutting for installation and will give you a 4-way connector on your Liberty. I have attached a link to an installation video for this harness on a 2012 Liberty you can check out. Due to the wiring on your Liberty, and if it did not come with a towing package, a powered converter is required to protect the vehicle...
    view full answer...
  • Location of Factory Connector for Trailer Wiring on 2006 Chevy Silverado 1500
    Your truck should have a round connector located above the spare tire for the adapter (part # 118384) to plug into. To locate the connector, you might have to lower the spare tire. The connector is usually zip tied to the rearmost cross member. The connector might have a protective cover over the end of it to keep road debris out of it. Certain models might not have the plug, but the wiring harness should still be there. If this is the case with your vehicle, cut the plug off the end of...
    view full answer...
  • Trailer Wiring Harness Recommendation for 2013 Nissan Xterra
    The Curt Class III hitch you mentioned, part # 13514 is an excellent choice that will work great for you. To provide a 7-way, you'll need the # 118266 wiring harness. In order to provide a functioning 4-pole, you'll need a T harness like part # 118384. If your trailer has electric brakes, you'll need a trailer brake controller. I'd recommend the safer, more predictable braking provided by a proportional controller like the Tekonsha Prodigy, part # 90885. You'll also need the # 3050-P brake...
    view full answer...
    Image 1 for


< Previous
123. . .15



Do you have a question about this Custom Fit Vehicle Wiring?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Brandon M
Expert Research:
Brandon M
Employee Adam R
Expert Research:
Adam R
Employee Rachael H
Expert Research:
Rachael H
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee John S
Video Edited:
John S
Employee Andrew K
Video by:
Andrew K
Employee Kathleen M
Video by:
Kathleen M
Employee Zach D
Video by:
Zach D
Employee Jonathan Y
Video by:
Jonathan Y
Employee Nicholas E
Test Fit:
Nicholas E
Employee Randy B
Test Fit:
Randy B
Employee Brent H
Test Fit:
Brent H
Employee Robert C
Test Fit:
Robert C
Employee Matthew B
Test Fit:
Matthew B
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Isabelle B
Updated by:
Isabelle B
Employee Ryan G
Installed by:
Ryan G

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.