Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors

See what our Experts say about this CURT Custom Fit Vehicle Wiring

• How To Install Curt 7-way Connector C55774 On 2002 GMC Sierra Where OEM Connector Was Cut Off
  We have just what you are looking for! Since the factory connector on your 2002 GMC Sierra 1500 was cut off by the previous owner, you can add a new one using the Tow Ready Replacement 7-Way Harness and Socket for Factory Tow Package # 20147. This will give you the correct connector to plug into the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors # C55774 you purchased. Now to install the # 20147 you will need to use a circuit tester...
  view full answer...
• 7-Way And 4-Way Connector For A 2018 Toyota Tacoma TRD Sport
  I do have a solution for your 2018 Toyota Tacoma TRD Sport, depending on what you're looking to do. The Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector # C56070 is designed to work with an existing factory 7-way and give you a second 7-way in the truck bed. Your photo looks like you have the round USCAR connector and I confirmed with Curt that the best solution for you if having both 4-Way and 7-Way connectors is the goal would be # C55774. Included is a video resource...
  view full answer...
  
• Troubleshooting Trailer Turn Signal Not Working With 2015 Ram 3500
  You are correct it is your 2015 Ram 3500 because you wisely hooked up the trailers to your wife's SUV and there wasn't an issue. Since there are no blown fuses or bad wiring, it seems likely the issue is simply your trailer connector. Check your connector for corrosion, which can be green or white in color. A build-up of corrosion can interfere with the signals getting through the connectors so if it is present you are going to need to clean the corrosion if possible or replace the plug...
  view full answer...
• 2020 Ford F-150 - Upgrading Factory 4-Flat Connector to 7-Way for Trailer Brakes
  I do have a way you can upgrade your factory 4-Flat connector, but the needed plug to install the Curt # C55774 isn't there on your 2020 Ford F-150. This will only work for vehicle's that were originally equipped with the 7-Way from the factory. There isn't a plug and play connector available to add a 7-Way to your truck. Instead, you'll need the Universal Installation Kit for Trailer Brake Controller, # ETBC7. The included adapter will plug into your existing 4-Flat. From there, you'll...
  view full answer...
• Replacement 7-Way Connector for 2006 Ford F-350 Super Duty
  We do have replacement 7-way connectors for your 2006 Ford F-350 Super Duty, though I'm not 100 percent certain what are are referring to in terms of also wanting a pigtail. What I recommend is replacing your 7-way with the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors # C55774. This will plug into your tow package harness and give you a brand new 7-way with the ability to also plug in a 4-way if needed. Since you mentioned having a...
  view full answer...
• Is there a Trailer Wiring Harness for a 2012 Honda Pilot LX that has Both a 4-Way and 7-Way
  If you do not need a 7-Way then you can use wiring harness # 118558 on your 2012 Honda Pilot. All Honda Pilots have at least some of the wiring already on the vehicle. However, if it had the tow package it would already have a trailer connector (7-Way) at the back of the vehicle. If you did need a 7-Way and a 4-Way then you actually could add # C55774 to the 7-Way harness # 118265. What I recommend if you tow trailers with 7-Ways and 4-Ways is to use harness # 118265 and then use an adapter...
  view full answer...
• Replacement 7 and 4- Way Connector for 2002 Ford F-150 with Factory Tow Package
  To retain your current 7 and 4-way configuration use the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package part# C55774. This will connect to the existing connector and allow you to have both the 4-way flat and the 7-way available for use.
  view full answer...
• Recommended 7 Way Replacement for a 99 Ford F-250 With Factory Port
  The Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors # C55774 will be the correct fit for your 99 Ford F-250. The round connector you have paired with the controller in the cab of your truck confirms this. The # C55774 also has a 4 Flat that mounts on the side of included bracket, so you do not need to keep track of an adapter, like the # PK12716.
  view full answer...
• How Can I Plug A 5 Pin Round Plug In To A & way Plug?
  I do have a potential solution for you, but we do not carry an adapter that will work with a 5 pin round plug. In this day and age the 5 pin round is very uncommon. The best solution we can offer would be to do away with the 5 pin round and replace it with a 7 way like part # H20043. It should be fairly easy to swap out, you would just need a few butt connectors # DW05745-5.
  view full answer...
• Will Curt C13900 Fit my 2001 Chevy Silverado
  While the Curt Trailer Hitch Receiver part # C13900 Would fit your Silverado it would require a lot of modifications be made to the truck by drilling into the frame. Instead use the etrailer Trailer Hitch Receiver part # e98849 which is designed specifically for your 2001 Silverado and will not require any drilling. It is also more economical and has a higher weight capacity. Check your owner's manual to ensure that you do not exceed your particular trucks capacity. If for some reason...
  view full answer...
• Can Curt 7-Way and 4-Way # C55774 Fit 2019 Chevy Silverado 2500HD
  The Curt T-Connector Vehicle Wiring Harness for Factory Tow Package # C55774 that you referenced is a fit for your 2019 Chevy Silverado 2500HD and would install easily by just plugging directly into the 7-way wiring that's present at the rear of the vehicle. I am not totally sure what you mean by taking the pin out of the two covers though. But this would attach to the lower portion of the rear bumper.
  view full answer...
• Installing a Trailer Connector on a 2016 Ford Transit T250
  I tried checking to see if we know of any connectors that should be for trailer wiring on the back of a 2016 Ford Transit T250 but it doesn't look like we have any that fit a connector like what you show. If your T250 came with the tow package then you would use a round US Car Connector like the Curt # C55774 otherwise you'd need something like the Curt T-Connector # C56327 for a 4-Way and then the Wiring Kit # ETBC7 with the extra wiring # 10-2-1 to add a fully functioning 7-Way. What...
  view full answer...
  
• Can 4-Way and 7-Way of 2021 Dodge Ram 2500 be Used at Same Time
  Yes, if you have the 7-way and the 4-way of your 2021 Ram 2500 in use at the same time you'd be totally fine.
  view full answer...
• 4-Way Extension Recommendation for Rear of Ford F-250 For Towing Second Trailer
  The Curt T-Connector part # C55774 that you referenced would be the first component you'd want. This will give you a 7-way and 4-way active at the rear of your truck. This will allow you to run a 4-way extension from the truck to the second trailer to activate the turn signals. For an extension you could use the part # A40W42B which is a 40 foot section of 4-way wiring that includes a male 4-way and then to the other end you could attach the part # HM48030 and you'd be set.
  view full answer...
• Will TowReady Ford Replacement OEM Tow Package Wiring Harness # 118242 Fit 2002 Ford F-350
  The TowReady Ford Replacement OEM Tow Package Wiring Harness # 118242 that you referenced will fit various model years and series of the F-150 with a factory 4-pole harness but will not fit your F-350. If your truck has a factory 7-way harness you can use the Curt Custom Fit Vehicle Wiring for the 2002 F-250 and F-350 Super Duty, part # C55774. This replacement harness has a round U.S. Car connector on one end and a combination 4-pole/7-pole trailer connector on the other side to enable...
  view full answer...
• Trailer Wiring Recommendation for 2015 Chevy Traverse
  The type of trailer wiring you'll need really depends on the trailer you plan to tow. For a vehicle like a 2015 Chevy Traverse you'd most likely only need a 4-way since this vehicle would be used to tow lighter duty trailers without brakes. That said, if you plan to tow a camper even the lighter duty campers will have brakes on them so a 7-way could be required. Either way you'd need to start with a 4-way so for that you'd want the part # C56181 which installs easily by plugging inline...
  view full answer...
• Comparing Diesel vs Gas Engine for Jeep Grand Cherokee to Tow Trailer
  I took a look at the online version of the owner's manual for the 2014 Jeep Grand Cherokee and it appears the actual towing capacity won't differ between the gas or diesel engine, as you are looking at a 6,200 pound limit for either option. The benefits then for a diesel engine over a gas is more power and low-end torque which in real life situations just means the Jeep's going to "feel" a bit more powerful when pulling a heavier trailer, especially when traveling through rough or hilly...
  view full answer...
• Recommended Wiring for 2016 Ford F-150 to Have 7-Way Trailer Connector
  If you already have the round wiring connector on your 2016 Ford F-150, then you simply need the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors # C55774. If you do not have the round connector and instead have the rectangular connector, then you will need the Replacement OEM Wiring Harness for Ford F-150 # C56110 to give you a 4-way and then add the 7-way wiring kit for brake controller # ETBC7 and connect the brake wire to the blue wire...
  view full answer...
• Trailer Wiring and Brake Controller Solution for 2020 Ford F-250 Super Duty
  Your 2020 Ford F-250 Super Duty does have a trailer wiring harness ran to the rear of the truck so to plug into that we have the Pollak part # PK11893 for a 7-way which is what most trailers you would tow with your truck would have. But if you wanted a solution that has both a 4-way and a 7-way you'd want the Curt # C55774 which installs the same but has both of these connectors present. If you do have a 7-way already and you were asking about installing a brake controller instead I would...
  view full answer...
• Can 7-Way and 4-Way of Curt Connector for 2014 Ram 1500 be Used at Same Time
  The Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors # C55774 are able to be used at the same time but it wouldn't be any different in regards to making sure the circuits were not overloaded. I believe you were referencing a different Q&A and this part was recommended (it fits a number of different vehicles) because the individual was unable to open the covers on their 4-way and 7-way at the same time. That is not an issue you will have...
  view full answer...
• Length Of Curt Vehicle Wiring C55774 For 2018 Nissan Titan With Factory Port On Passenger Side
  It sounds like you are trying to make sure you can use the existing bracket mount on your hitch to mount the Curt T-Connector part # C55774 on your 2018 Nissan Titan with factory 7-way port. The wiring portion of the Curt T-Connector measures 15-3/4" long so you may want to measure from the factory 7-way port to the mounting bracket on your hitch to see if you have enough length. The other options would be Gooseneck wiring options and the shortest one available is 7 feet long which is way...
  view full answer...
• How to Know If Vehicle Wiring Will Be Overloaded By Connected Trailer Lights
  If you were using Curt T-Connector # C55774 and wanted to make connections at both the 4-pole and 7-way at the same time you could add the current draw of the two connected trailers/devices (like a tailgate light strip) to know whether this would exceed the rating of the circuits. The online manual for your 2015 F-250 indicates multiple separate fused circuits for the various trailer light functions. Fuse 10: 40-Amp for Trailer Tow Fuse 22: 30-Amp for Trailer Brake Controller Fuse 26:...
  view full answer...
• Easiest Trailer Wiring Solution for 2018 Jeep Grand Cherokee with OEM Wiring Present
  If it was my vehicle I would go with the factory tow package 7-way and 4-way wiring kit part # C55774 that you referenced since you have the connector present for it already. There's a good chance the wiring is already active too but at worst a trip to a dealer to have them reflash the computer would be super easy as well. The T-one style kits aren't terrible but if you have the wiring already present the route mentioned would be super easy and gives you both styles of trailer wiring.
  view full answer...
• Troubleshooting Trailer Light Functions Not Working on 2014 Ford F-150
  On your 2014 Ford F-150 if you don't have factory wiring, you will simply splice into the tail light wiring at your tail lights to get the 4-way functions using # C58044. If you have the factory 4-way, then the harness may be bad or need help connecting. The Curt # C56110 is intended as a factory replacement for your truck. Make sure all the pins are not bent and the connection is free of debris or corrosion. If you have the factory 7-way, you will want to check your factory wiring...
  view full answer...
  

Do you have a question about this Custom Fit Vehicle Wiring?