Can Curt 7-Way and 4-Way # C55774 Fit 2019 Chevy Silverado 2500HD

Question

Question:

Will this work on our 2019 Silverado 2500 had ? Could we just take the pin out of the two covers instead

asked by: Marc V

0

Expert Reply:

The Curt T-Connector Vehicle Wiring Harness for Factory Tow Package # C55774 that you referenced is a fit for your 2019 Chevy Silverado 2500HD and would install easily by just plugging directly into the 7-way wiring that's present at the rear of the vehicle. I am not totally sure what you mean by taking the pin out of the two covers though. But this would attach to the lower portion of the rear bumper.

expert reply by: Jameson C

0

Answer 1

You are going to need the Draw-Tite Receiver #41932 for your 2004 Chevrolet Silverado 2500LD. The Receiver #41936 you found will only fit cab and chassis versions of the 3500 Silverado and Sierra trucks for your year.

view full answer...

Answer 2

There are heavy-duty Class V trailer hitch receivers that fit your 2004 GMC Sierra 2500 LD, though the hitch you mentioned is only a fit for the 2500HD model. You need to have the standard factory bumper on your truck, and if you do, then there are…

view full answer...

Answer 3

Yes, the Curt trailer hitch part #C14332 is a confirmed fit for your 2002 Chevy Silerado 1500 and would work well. The only versions of your truck this hitch does not fit are the ones with either a roll pan bumper or a deep drop bumper. If you have a…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 7

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Answer 8

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 9

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 10

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 11

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 12

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Can Curt 7-Way and 4-Way # C55774 Fit 2019 Chevy Silverado 2500HD

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching