To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Plug in Simple wiring connectors provide a no-hassle, quick and easy way to wire your vehicle.
Installation: The OEM plug for the Pontiac Aztec/Buick Rendezvous is located behind the bumper below the driver's side taillight. A mounting bracket is recommended for the 4 pole connector.
Can be used with 5-pole, 6-pole or 7-pole adapters.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Alright, today on this 2004 Buick Rendezvous we're going to install part number 41405 from Hopkins. This is a wiring harness that plugs in to the factory towing port. First, we'll go ahead and locate the port. It's underneath the vehicle, on the driver side, above the suspension in the corner by the bumper. We'll go ahead and use a trim panel tool to remove it from the sheet metal underneath then we'll go ahead and remove the cap. There's a small tab we need to pull up then it comes right apart.Now we'll take our new wiring harness, we'll add some dielectric grease that comes with it to the terminal then we'll go ahead and snap it into place.
Then we'll go ahead and return the port back to it's original mounting position and then reinstall it on the sheet metal.Next we'll go ahead and route our 4-pole harness over to the center of the hitch. Then we'll use a variety of ties to help secure the excess wires up and out of the way.With those two steps, our wiring harness is already installed. That'll finish it for part number 41405 from Hopkins on our 2004 Buick Rendezvous.
Average Customer Rating: 4.9 out of 5 stars (59 Customer Reviews)
This is the second time I have made purchases from E-trailer. The receiver is excellent quality and well made and the wiring harness is very easy to install. Great job.
Bought the Trailer Hitch for my Buick Rendezvous to pull my Boat and my Utility Trailer. Very satisfied with the Quality, the Ease of Installation and the Price.
This is my Third Hitch System that I have purchased from etrailer.com and I have been very satisfied with all of them.
Thank you etrailer, customer service and prices are great! Appreciate installation videos & tips. Hitch fit is spot on for my 2003 AWD Rendezvous. Did install in carport by myself without having to lower exhaust or spare tire. Part 80101-1 is a must to make job easier, and 41405 wiring harness is a simple plug in. Will be using primarily for a receiver mounted bike rack.
I bought a wiring harness for my Buick Rendezvous and after removing both tail lights and some other panels (45min) I still didn't
like how the wiring was routed.So I bought a Hopkins Wiring Kit and installed it in less than 3 minutes. Nothing to remove just plug it in and go. I wish I had heard of the Hopkins Wiring Kit before I bought the wiring harness. Also the Hopkins kit was cheaper.
What a great Site. Very easy to navigate, I purchased a DrawTite trailer hitch for my 2004 Buick Rendezvous. The video's showed the install process with step by step instructions for both the hitch and the wiring harness, had it completed in less then an hour. Low price with great service you don't see everyday.
My Rendezvous had the plug for trailer wiring up behind the bumper, so this was a quick plugin, and I was ready to go. I did have some plastic flexible conduit that I placed around this wiring, to protect it from wear.
So I got the hitch with-in 3 days of ordering.
I had a shop lined up to install it but our times didn’t line up. Now before telling this story mind you I am a disabled person (50) and at the moment I also have what they call frozen shoulder. VERY minimal use of arm, being my dominant arm. Last night in my yard with some light I was able to complete this job in less than an hour. No dropping the exhaust or having to lower the spare tire. Thank you for making a product that truly is a no Brainer. Did have some help from my girlfriend who knows nothing about tools. She’s learning though. Lol
After reading all the horror stories of putting a 4 flat harness in a Rendezvous, a friend sent me to etrailer. Found the Hopkins Plug, took 2 minutes to install and voila!!! Wired and ready to go! Thanks for your great site!!!
The wire harness for my vehicle worked great and was simple to install. Your web site even had a built in link for a video showing how to install it.
The staff was extremely helpful as I had a shipping problem so Regina S. was able to help me order another one. A big thank you to her !!!
Piece of cake!!! Easy installation!! Super fast delivery! Thanks so much! Checked out the other ways to wire a Rendezvous. Kind of like a pass in football; 3 things can happen and two of them are bad. Took less than 5 minutes and the system was plugged in, camper hooked up and on the road! Thanks again and especially thanks for all the instructional videos you supply on your website!!!
Product and installation were exactly as represented. Could not be more pleased with eTrailer for quality product and great information
Very nice wiring harness. Easy install and no wires to cut. Quite pleased.
I found the wiring harness for my car easily. My order came in quickly and packaged well. It installed in minutes.
Couldn't get any easier.
The harness was exactly what I was looking for. There was no need to cut or splice any wires. It plugged right in, was the perfect length, and worked perfectly with my trailer setup right out of the box.
Received product in 4 days, that's great! Product was the correct item I just crawled under the car found the connection. plugged it in. Hooked up the boat lights worked.
Thanks M.
Well make, conductor jackets were think for exterior of car use, the connector mated directly with a buick as advertised.
Cable was able to pass through a bulk head and into car so that it could be stored inside when not in use.
Excellent product. Just basically plugged it in and routed wire to trailer hitch.It could not have been any easier.
Got this for my tow pkg to tow my boat. Installation was easy. Plug and play.
Product fit without a hitch. Took longer to get under the car and figure out where to route the wire than it did to hook up!
2 minute install on rendezvous wiring for trailer.
plugged right in
Real easy to install (my daughter-in-law actually installed it on her car) in less than 3 minuets. The hardest part was trying to find spots on the car to zip tie the wiring to.
I put one a few yrs. ago on my Honda Accord and it worked perfect. I just got one today for my Buick Rendezvous and am going to wait until better weather as its snowing here in Iowa. I have the greatest faith that I won't have any.problems. they make a good product at a good price
I installed this on a customers vehicle and they love it. No problems whatsoever with installation or use.
the product I ordered works terrific just tried it out today simple as plug and play!
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thomas V.
4/12/2020
Great! Easy Installation Quality Product.