Brophy Slide In Camper Tie-Downs - No Drill Bed Mount - Qty 4
(218 reviews)
Price: $202.85
In Stock
Brophy Slide In Camper Tie-Downs - No Drill Bed Mount - Qty 4
Item # HSSF
Retail:$220.09
Our Price: $202.85
You Save: $17.24
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (218)
- Q & A (0)
- Photos
- Used (1)
Brophy Camper Tie-Downs - HSSF
- Front and Rear Tie-Downs
- Brophy
- Bed-Mounted
- Powder Coated Steel
Steel brackets clamp onto the side rails of your non-dually, full-size pickup with no drilling required. Creates a dependable anchor point for securing your lightweight camper to the bed. Simple to install and to remove.
Features:
- Creates attachment points for securing your camper to your truck bed
- Wide clamps provide superior holding strength
- Turnbuckles (sold separately) required to attach camper to tie-downs
- Protects your truck's paint with neoprene pads attached to the brackets
- Resists corrosion and rust with black powder coated steel
- Clamps securely onto your bed rails - no drilling required
- Includes 4 camper tie-downs with clamp plates, 12 neoprene pads, and installation hardware
- Made in the USA
Specs:
- Application: for exact fits, enter in your vehicle's year/make/model above
- Minimum 2" needed between sidewall and lip of bed rail
- Not compatible with drop-in bed liners, aftermarket bed rails, double-walled beds, or side-step beds
- Dimensions: see diagrams below
- 1-Year limited warranty
No-Drill Installation
These clamp-on tie-downs install quickly and easily, with no drilling or modification to your truck required. Because they're mounted in the bed instead of on the frame or body of your truck, you don't need any kind of fancy mechanical background to get this job done. You just need to slide the hold downs over the rails of your truck and clamp them down with the included T-bars and hex bolts.
The fact that they simply clamp on means that you can remove these tie-downs when you're not hauling your camper, leaving no trace. Use the provided neoprene pads on the T-bolts and tie-downs where they make contact with your truck to make sure no scratches or dents will be left behind either.
It's important that the tie-downs on your truck line up with the anchors on your camper at the correct angle to ensure a secure hold. Ideally the tie-downs should be on the outside of your camper's anchor points, but they can be on the inside as well, just as long as they're not lined up with each other.
Securing your Camper
To secure your camper to your truck, you'll also need a tie-down hardware package consisting of turnbuckles, S-hooks, and chains (TDHP - sold separately). This hardware attaches the anchors on your camper to the tie-downs on your truck to keep your camper safely mounted. Once you tighten the turnbuckles to the correct level of tension (not too tight!), you'll be good to hit the road.
HSSF CR Brophy Truck Camper Tie Downs for Slide In Truck Camper - Camper Hold Down - No Drill Tie Down - 4 Pack
Installation Details
Customer Satisfaction Score:
90% were satisfied with this product
10% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Brophy Slide In Camper Tie-Downs - No Drill Bed Mount - Qty 4 - HSSF
Average Customer Rating: 4.6 out of 5 stars (218 Customer Reviews)
Steel brackets clamp onto the side rails of your non-dually, full-size pickup with no drilling required. Creates a dependable anchor point for securing your lightweight camper to the bed. Simple to install and to remove.by: TheAvionNomad01/18/2024
I used these to mount a vintage 1970 Avion C-11 to a 1993 D250. They worked great and were much stronger than I expected - and it was a huge cost savings (and a much more attractive look) than some of the frame mounted options of more than $1000. There were some oddities that I noticed. It was impossible to mount them exactly the way the instructions suggested because of where on the wings near the cab,. The brackets also could not stay on with the camper unloaded because they would hit the jack mounts, meaning they had to me bolted in after the camper was in the truck but before lowering the jacks, making the access to the bolts a frustrating 'feel for it' experience.I'f suggest the manufacturer secure the bolt so that you don't need to hold both sides when tightening/loosening, and also refine it to need less turns to do so. It took me 2 hours to mount the first time, and not much less when removing them with the limited access. The pads also came off in the first use.
I gave it a 5 star because I realize there are limited options for older campers and anything universal is going to have issues with some thing - so that's just my input and experience. Overall pretty reasonable for the price and functionality.
by: Pat03/20/2023
The product was shipped extremely quickly, it arrived 3 days after I ordered them. As far as the product goes I was extremely pleased that they were as easy to install as the product video showed them to be. I had been looking for
a tie down system that would work for my 2018 Ford since I purchased my camper in 2020 and after much research I found these at etrailer. One word of advice is that if your camper has a shower or other design that allows the camper to extend across the bed behind the wheel wells, either move the rear tie downs forward or shorten the leveling stud before you attempt to load your camper. On mine it turned out that once the tie downs were placed and attached I had to cut off about 3 inches of the threads.
Other than that it was an easy install although the bolts that attach the tie downs to the under lip clamp are a challenge to install but take your time and they will go on. I will post an update once I have been on the road for a few trip and see how they are working.
Thank you etrailer for your super fast shipping and online product videos.
by: Ed B.05/21/2019
Purchased the Brophy camper tie down set of four for the Palomino truck camper I just purchased. These are my second set as the first set were sold with my Hallmark camper. Easy to install and hold the camper in the truck with no worries.
by: James 05/20/2024
Ordered these for new camper. Very easy to install and does the job without the high cost of frame mount.
by: Jeff Smith10/22/2023
These tie downs work great. It holds my 3k lb Cabover camper in place without issues. And I live in my camper, so not losing my home is very important to me!!
by: Shelly12/13/2023
The products arrived on the time scale as stated. The packaging did not hold up and the box with the metal tie downs was broken open. There was too much weight for the box and it just split open. Not sure if anything is missing. Packaging of items that are heavy should be more secure and sturdy.
Jenny N.
12/14/2023
Oh no! I will have our Customer Service team reach out to you. If anything is missing we can take care of it.
by: Ron W07/02/2016
As far as I'm concerned these are junk. Wasted my money. Do not mount in proper location on a 2011 Chevy Silverado 6.5' Bed. Because of the design of the bed rail the mounts cannot be installed in the proper locations for securing camper. The photos show the maximum forward and back that these can be mounted. Not at all made for the 6.5 foot bed 2007 or later Siverado. The Black Powder Coated Steel isn't that great either. Paint missing, dinged up from storage and shipping probably.
by: Allen.08/22/2022
These wont work for my truck and camper. The box on a 2018 gmc 2500 short bed does not lend well to placement of these in order to get the correct geometry i needed for the tie-down points on my Palomino maverick 6601. I had high hopews of not having to buy the frame mounts, but i will have to.
Mike L.
8/31/2022
The HSSF tie downs have specific fit parameters as mentioned in the product specifications above: External bed rail width cannot exceed 5-12 Requires at least 2 of space beneath lip of bed rail Not compatible with -in bed liners, bed rails, double-walled beds, or side-step beds
Allen.
8/23/2023
In response to the etrailer comment response, they fit on the bed fine, with plenty of clearance and would work for a smaller camper. they just did not fit in the right spots for my truckcamper combo.
by: . George01/03/2024
The tie downs are great no problems.Very easy to install.I keep them on my truck all year long Thank you
by: Terry08/08/2023
Order arrived quickly, priced ok. Box was broken open by shipper NS the 4 T-bolsts bolts ere missing. Etrailer shipped ou the missing parts a few days later, but in the meantime I fashioned t-bolts I could use for my trip. Many customer comments on this camper Brophy tie-down match my experience. Etrailer follow up was great, but surely must be aware that their packing is sub-standard. Perhaps zip-tying the T-bolts to larger pieces would eliminate the loss even in case of breakage. Functionally the tie-dows were easy to install and seem quite adequate for off-road use of my in-bed camper. Will continue to use etrailer because of their excellent customer service.
by: captkirk02/15/2021
These tie-downs worked awesome for our pop up camper on our 1998 F150. Super snug, haven't loosened up or moved on the truck, camper hasn't budged either. I was leary at first not having the camper tied to the frame but now I have total faith in these tie downs.
by: Mike S05/23/2020
These Brophy tie downs have worked great over the past year. I leave the camper on the truck and it is my daily driver as well as RV. The camper weighs in at 1500 dry and about 2000 loaded. I do not do any radical 4x4 but I have taken some backwoods off road logging trails.
by: Bing09/23/2019
I received this tie downs on July, and first used it yesterday.
My Camper ‘s dry weight is about 1600 lb, and the products are good for my truck camper.
The problem was the position where tie downs were fitted on my truck. I tried several times to fitted tie downs to my truck.
by: Brent 08/08/2019
I bought these for our brand new 2019 GMC Sierra 1/2 ton because no custom options were available. I was happy that they were easy to install, and look great. I’ve used them in the past and have been happy with how they hold campers. Sure I’d rather have custom mounts from the frame, but for the price and because these are my only option that’s what I got. These will work just fine, and I like that I can swap these out on trucks.
The one thing I wish was different was that the threaded T handle portion would have a longer option. I had to fancy up a 2”x6” to run inside the side of my p/u bed so they would touch something.
As always another great shopping experience with etrailer. They haven’t let me down yet. Especially Lori, what a great customer service rep.
by: Patrick04/02/2020
These things are solid although i put duck tape on the T pads....installed 2014 Chevy Silverado 6.5 ft bed for 1200lb Starcraft.
Patrick
4/6/2021
Still have not moved! Great design and cost savings.
by: Matt04/14/2015
These camper hold-downs appear to be manufactured from good steel stock and should do the job nicely. I did have one piece that was slightly damaged but was not caught when packaged (the damage was not due to shipping). I was able to take a hammer to the bent steel and straighten it sufficiently to use the part. It was a little disappointing however, and should have been caught prior to shipping.
Overall I am pleased with the quality and price
by: Regan06/25/2019
Using on 2013 Ford F150 for a smaller cabover. Great quality product, shipped fast, works great. Had to turn bolts around to clear inside of bed. Held camper solidly over rough trails!
by: Bryce05/10/2022
Fits well on a First Gen Tundra. I was extremely unsure about fitment for my truck but they work great! Install only takes 5-10 minutes. I would definitely recommend. Steel is quite thick and seems very strong.
by: John05/25/2020
Easy to install and have done what’s expected. Keep the camper in place!!
by: JAMES K09/24/2012
ORDER ON TUESDAY RECIEVED ON FRIDAY NOON SAME WEEK ONLY PROBLEM WAS 4 7/ 16 NUT WERE 4 1/2 NUT HAD TO BUY 4 NUTS OTHER THEN THAT I WOULD BUY OFF ETRAILER AGAIN VERY GOOD SERVICE
by: Neil08/04/2021
Arrived on a rainy day with the box falling apart. Too much heavy steel to be loosely packed. Fortunately, the hardware bag was still there. Some bare metal showing. I had some emails with MacKenzie B. and they were responsive and without asking they offered me a 5% refund for the damage. After my first trip, they performed well on some very bumpy roads. Held strong and didn't move. I did have to re-adjust the lower standoffs after the first week. Taking them on/off is frustrating because the 2 nuts are in the small gap behind the clamp against the inner bed wall. Too tight for all but an open end wrench. 1/6 turn times too many fumbling tries, arg! Also, I was nervous not having a locking feature (lock washer, locknut, etc). I bought 8 locknuts (pinch type) and welded them to the inner plate. Then bought 8 round head hex bolts (grade 8). So now I can install easily with an Allen socket. See pictures. Recommend eTrailer consider this modification.
Neil
8/5/2022
After my mount bolt mod, Ive used these multiple times and they are working great! Very stout and no visible marks on my F250 bed.
by: Chuck11/13/2012
Found easy to install, I placed lock washers on the 8 3/8" bolts. Sold at Menards for 89 cents (pkg of 8) not in kit. Placement was a little restrictive with dealer installed bed liner. Takes 30 minutes to install all 4. Great buy.
by: Jason S.06/05/2019
These tie downs were a great budget solution in leu of a permanent installation of my camper shell and/or frame mounted tie downs. Aside from needing to plan their placement (they can hang in front of the gas cap if you don't plan it right the first time around... no, I didn't accidentally block my gas cap... maybe I did) and take into consideration they also need a little bit of internal clearance as well, they work just fine. I haven't noticed any cargo shifting nor warping of the truck bed around where they are installed. My camper shell is under 1K lbs and it holds just fine.
Jason S.
6/8/2020
A year later & they still hold strong.
by: Dayton12/15/2023
Awesome customer service my new fav pl ace
by: dave07/08/2016
Its a good product for a light camper. I personally would not use it on anything heavier than 1000lbs. But then iam not an engineer. I sold mine and my camper and bought frame mounted tie downs
Dave
7/11/2017
Did not work for me. Tried to send them back but shipping would cost a bundle so i would get less than half of what i paid. Sold them same day on-line. Not good for a larger camper.
Rachael H.
7/12/2017
25
218
Show More Reviews
See what our Experts say about this Brophy Camper Tie-Downs
- Will Camper Hold Downs Fit On The 1995 GMC Sierra 1500 4 x 4 with a 8 Foot CamperYes, the Camper Hold Downs, part number HSSF will work on the 1995 GMC Sierra Pickup. The hold downs do not fit in the stake pockets but wrap around the bed rails and are mounted inside the bed. When attached the chains are tightened and pressure is applied from the inside of the bed out and down.
view full answer... - Fitment of Brophy Clamp On Camper Tie-Downs on a 2019 Ram 3500 and 2018 Palomino BackpackThe Brophy Clamp On Camper Tie-Downs # HSSF is a universal application and should work great to secure your 2018 Palomino Backpack camper on your 2019 Ram 3500. Just reference the attached dimensional photo to ensure that it will accommodate the side rail on your pickup and you are good to go!
view full answer...
- Compatibility of Brophy Camper Tie-Downs with 1998 GMC Dually Pickup TruckThe Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 # HSSF are not recommended for dually trucks. They are a fit for most full-size, non-dually pickup trucks according to the manufacturer. I did reach out the manufacturer and they said you may be able to use the # HSSF or the # HSAB but they have not tested it on a 1998 GMC dually. The sidewall width is the biggest issue with the angle coming down to ensure clearance for connection. They also stated that...
view full answer... - Will The Brophy Camper Tie Downs # HSSF Fit My 1999 Ford F-250 Super DutyThe Brophy Camper Tie Downs, part # HSSF, are a universal item for domestic full-size trucks and will fit your 1999 Ford F-250 Super Duty. The # HSSF tie downs can be used on any size camper. If your truck has a drop-in bed liner, it will need to be trimmed or removed to use part # HSSF. The recommended hardware kit is the Camper Tie Down Hardware Package, # TDHP.
view full answer... - Will Brophy Camper Hold-Downs # HSSF Fit 2013 Nissan Frontier Pickup TruckI spoke with my contact at Brophy about your 2013 Nissan Frontier truck. They told me that they do not do a test fit of the Camper Hold Down, part # HSSF, other than on domestic trucks so they would not say they would fit or would not. They also said that it requires a minimum of 2 inches underneath the bed rail for installation. I have attached a link to an installation video for this hold-down you can check out.
view full answer... - Which Brophy Camper Tie Down Fits 2015 Ford F-150 BestThe Camper Tie Downs part # HSAB that you referenced are a universal install tie-down system that would work well on your 2015 Ford F-150. You should still check owners manual of your truck to see if there are any restrictions on using truck bed mounted camper tie downs. I checked with Brophy and they recommend using the # HSSF, which will work with your truck as long as there is two inches of clearance under the lip of the bedside, as shown in the provided diagram. For a hardware kit...
view full answer...
- Will the Brophy Clamp On Camper Tie-Downs Work On a 2018 Ford F-150 with Aluminum BedI have spoken with Brophy in the past about using the Brophy Clamp On Camper Tie-Downs on a Ford F-150 with aluminum bed and they said so long as you use part # HSSF there won't be any issues. In order to secure the truck bed camper to these tie-downs you will also need the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs part # TDHP.
view full answer... - Can I Use # HSSF Camper Hold Down Brakets in My 2000 Dodge Ram for my 11-1/2 ft Camper ShellThese Camper Hold Down, part # HSSF, are universal fit items made to fit most trucks. These hold downs wrap around the truck bed rails and are mounted inside the bed. Like other products, they do not fit in the stake pockets. Some dual rear wheel beds interfere with installation of the hold downs. You will want to check, however, that your vehicle manual does not state that you would be unable to use sidewall type camper hold downs. Otherwise, these should work well to secure your 11-1/2...
view full answer... - Camper Tie-Downs for 2015 Ram 3500The Brophy Angled Hold-Downs # HSAB, Camper Hold Down # HSSF, and the Camper Hold Down Zinc Finish # HSBP will all fit your 2015 Ram 3500. The types of truck beds these will not fit include step-side beds, some double-wall beds, some dually beds, most mid-size or import trucks, beds with drop-in bed liners, and plastic bed rails. The Brophy Angled Hold-Downs # HSAB have neoprene pads to protect your truck's paint. They also provide more clearance between the hold-downs and the outside...
view full answer... - Do Brophy Camper Tie Downs fit a 2021 Nissan Titan XDYes, the Brophy Clamp On Camper Tie-Downs # HSSF will fit on your 2021 Nissan Titan XD as long as your external bed rails do not exceed 5-1/2", you don't have a drop in bed liner, plastic bed rails, double-walled beds, or side-step beds. You shouldn't need to remove your factory bed rails unless they are raised rails. You will also need the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs # TDHP to secure your camper to the truck bed.
view full answer... - Recommended Clamp On Bed Mounted Camper Tie Downs for a 2001 Dodge Ram PickupFor a set of clamp on camper tie downs that have been confirmed to fit your 2001 Dodge Ram Pickup I recommend using the Brophy Clamp On Camper Tie-Downs part # HSAB. I have attached a photo for you on a truck from the same generation to show fit. The Brophy Clamp On Camper Tie-Downs part # HSSF should also fit but we have not yet tested this. It looks like you may need the angled lip to clear the bed sides so I do recommend using part # HSAB. The angled lip is the only difference between...
view full answer...
- Camper Tie Down Recommendation for a 2015 Ford F-250The Brophy Camper Tie Downs, part # TDSF are a universal application for full-size trucks and they will fit a Ford F-250 Super Duty. The hardware to mount the tie downs to the vehicle is included. I would also recommend the Brophy Camper Tie Downs, part # HSSF which is a more heavy duty tie down. The tie downs wrap around the bed, not in the stake pockets, and are mounted inside the bed. They will not work with a slide-in bed liner. There is no weight capacity rating on the camper tie...
view full answer... - Truck Bed Camper Tie Down Recommendations for a 2013 Ford F-150The Brophy Camper Tie Downs, part # TDSF can be used on campers that have a total length of up to 8 feet in length. The Brophy Camper Tie Downs, part # HSSF can be used on any size campers. There is no weight capacity rating on the camper tie downs and they will work for any camper size that is properly sized for your 2013 Ford F-150. The Brophy # TDSF mounts into the truck bed stake pocket, where as the Brophy # HSSF tie downs wrap around the bed, not in the stake pockets, and are...
view full answer... - Recommended Rear Camper Tie Downs for a 2021 GMC Sierra 1500Since you have running boards that run all the way to the rear, the only cusotm tie downs available for your 2021 GMC Sierra 1500 are for the rear using the TorkLift Camper Tie-Downs - Custom Frame Mount # TL54FR. To properly install your pop up camper in your truck you're going to need all 4 tie downs, so the only way you'd be able to do that is if you used # HSSF which is an in bed tie down.
view full answer... - Camper Tie Down Recommendation for 1997 Ford F-350Yes, the Camper Hold Downs part # HSSF will work on your 1997 Ford F350. There is no weight capacity rating on the camper tie downs and they will work for any camper size that is properly sized for your vehicle. The weight capacity will be on the Brophy Camper Tie Down Hardware Package, part # TDHP that is used to attach the camper to the tie downs. The hardware package has a weight capacity of 3,000 lbs.
view full answer... - Which Brophy Camper Tie Downs Fit 2015 Chevy Silverado 1500We have a great solution, but Brophy does not recommend their part # TDSF for trucks newer than 2011. So instead you'd want the part # HSSF with the hardware kit # TDHP for your 2015 Chevy Silverado 1500.
view full answer... - Brophy Camper Tie Down Recommendation for 2017 Ford F-350The Camper Tie Downs part # HSAB that you referenced are a universal install tie-down system that would work well on your 2017 Ford F-350. You should still check owners manual of your truck to see if there are any restrictions on using truck bed mounted camper tie downs. I checked with Brophy and they recommend using the # HSSF, which will work with your truck as long as there is two inches of clearance under the lip of the bedside, as shown in the provided diagram. For a hardware kit...
view full answer...
- Fit of CR Brophy # HSSF Truck Bed Camper Tie Downs on 2007 Toyota TundraCR Brophy, the manufacturer of the # HSSF tie downs did not test fit on the 2007 Toyota Tundra, so they can neither confirm or deny the fit. I was told that if the bed is single walled and the lip under the bed side is at least 2 inches wide, the tie town should fit (see photo). Torklift offers tie-downs that are a confirmed fit, you can see the different fits available by clicking the provided link.
view full answer...
- Can Brophy Camper Tie Downs Be Used on Ford F-350 with Aluminum BedWe have spoken with Brophy in the past about the Ford F-350 with aluminum bed such as your 2018 model and they recommend using the Brophy Clamp On Camper Tie-Downs part # HSSF. There won't be any issues with these tie downs and an aluminum bed so long as you are not exceeding other figures such as payload capacity etc. In order to secure the truck bed camper to these tie-downs you will also need the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs part # TDHP and you'd be set.
view full answer... - Camper Tie-Down Option For 1967 GMC C2500There aren't any frame tie-downs for your 1967 GMC C2500 but there is a possible option for bed-mounted tie-downs. I say possible because it is going to depend on a few things. So long as your external bed rail width is 5-1/2" or less, you have at least 2" of space beneath the lip of your bed rail and you do not have any type of drop-in bed liner, double-walled bed, or side-step bed (which you shouldn't with your truck but I just want to be thorough), then what you can use are tie-downs...
view full answer... - Can the Brophy Clamp On Camper Tie-Downs Be Used On a Ford F-150 with Aluminum BedWe have spoken with Brophy in the past and for a Ford F-150 with aluminum body such as your 2017 model they recommend using the Brophy Clamp On Camper Tie-Downs part # HSSF. There won't be any issues with these tie downs and an aluminum bed so long as you are not exceeding other figures such as payload capacity etc. In order to secure the truck bed camper to these tie-downs you will also need the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs part # TDHP. Although certainly...
view full answer...
- Brophy Tie Down Fit for 2011 Nissan FrontierBrophy tie downs, # HSSF, do not have an official fit list but they tend to not work well on import trucks like your 2011 Nissan Frontier. They do offer a different style that clamps on, # HSCP, that is more likely to fit as long as the truck bed is not a step side or dually. I have linked the instructions for you. I also recommend hardware package # TDHP to secure the camper to the tie downs. This setup is rated for use with any camper that fits the bed dimensions of your truck so...
view full answer... - Brophy Camper Tie Down Recommendations for a 2003 Dodge DakotaThe Brophy camper tie downs # HSSF do not have a specific truck fit list, just some possible exclusions. They will not fit the following: Will not fit step side beds or some double-wall beds Will not fit some Dually beds Will not fit some import trucks Will not fit 2004-2008 Ford F-150 Pickups Your 2003 Dodge Dakota does not fit into these categories so you would look at the video review and instructions linked to the right and compare them to your truck bed to determine if they will...
view full answer... - Will the Brophy Camper Hold Downs # HSSF Fit on a 1996 Ford F-150Yes, the Brophy Camper Hold Downs, item # HSSF, will fit on your 1996 Ford F-150. These Hold downs do not install in the stake pockets, but wrap around the bed side. The instructions, see attached link, show the installation in detail. You may also be interested in the Camper Tie Down Hardware Package, item # TDHP.
view full answer...
Do you have a question about this Camper Tie-Down?
Used Items Available
Condition: Surface Scratches
Notes: Parts are scratched up, seems to be some signs of instalation, otherwise fine.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Brandon M
Expert Research:
Adam R
Expert Research:
Jeffrey L
Expert Research:
Sarah H
Video Edited:
Zack K
Video by:
Patrick B
Installed by:
Matthew K
Installed by:
Cole B
Updated by:
Rachael H
Updated by:
Amanda M
Updated by:
Manda E
Updated by:
Amanda K
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ed B.
5/22/2020
No problems. Would buy again. Very easy to take on and off the truck.