Brophy Slide In Camper Tie-Downs - No Drill Bed Mount - Qty 4
(218 reviews)
Price: $203.83
In Stock
Brophy Slide In Camper Tie-Downs - No Drill Bed Mount - Qty 4
Item # HSSF
Retail:$220.09
Our Price: $203.83
You Save: $16.26
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (218)
- Q & A (0)
- Photos
- Used (1)
Brophy Camper Tie-Downs - HSSF
- Front and Rear Tie-Downs
- Brophy
- Bed-Mounted
- Powder Coated Steel
Steel brackets clamp onto the side rails of your non-dually, full-size pickup with no drilling required. Creates a dependable anchor point for securing your lightweight camper to the bed. Simple to install and to remove.
Features:
- Creates attachment points for securing your camper to your truck bed
- Wide clamps provide superior holding strength
- Turnbuckles (sold separately) required to attach camper to tie-downs
- Protects your truck's paint with neoprene pads attached to the brackets
- Resists corrosion and rust with black powder coated steel
- Clamps securely onto your bed rails - no drilling required
- Includes 4 camper tie-downs with clamp plates, 12 neoprene pads, and installation hardware
- Made in the USA
Specs:
- Application: for exact fits, enter in your vehicle's year/make/model above
- Minimum 2" needed between sidewall and lip of bed rail
- Not compatible with drop-in bed liners, aftermarket bed rails, double-walled beds, or side-step beds
- Dimensions: see diagrams below
- 1-Year limited warranty
No-Drill Installation
These clamp-on tie-downs install quickly and easily, with no drilling or modification to your truck required. Because they're mounted in the bed instead of on the frame or body of your truck, you don't need any kind of fancy mechanical background to get this job done. You just need to slide the hold downs over the rails of your truck and clamp them down with the included T-bars and hex bolts.
The fact that they simply clamp on means that you can remove these tie-downs when you're not hauling your camper, leaving no trace. Use the provided neoprene pads on the T-bolts and tie-downs where they make contact with your truck to make sure no scratches or dents will be left behind either.
It's important that the tie-downs on your truck line up with the anchors on your camper at the correct angle to ensure a secure hold. Ideally the tie-downs should be on the outside of your camper's anchor points, but they can be on the inside as well, just as long as they're not lined up with each other.
Securing your Camper
To secure your camper to your truck, you'll also need a tie-down hardware package consisting of turnbuckles, S-hooks, and chains (TDHP - sold separately). This hardware attaches the anchors on your camper to the tie-downs on your truck to keep your camper safely mounted. Once you tighten the turnbuckles to the correct level of tension (not too tight!), you'll be good to hit the road.
HSSF CR Brophy Truck Camper Tie Downs for Slide In Truck Camper - Camper Hold Down - No Drill Tie Down - 4 Pack
Installation Details
Customer Satisfaction Score:
90% were satisfied with this product
10% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Brophy Slide In Camper Tie-Downs - No Drill Bed Mount - Qty 4 - HSSF
Average Customer Rating: 4.6 out of 5 stars (218 Customer Reviews)
Steel brackets clamp onto the side rails of your non-dually, full-size pickup with no drilling required. Creates a dependable anchor point for securing your lightweight camper to the bed. Simple to install and to remove.by: TheAvionNomad01/18/2024
I used these to mount a vintage 1970 Avion C-11 to a 1993 D250. They worked great and were much stronger than I expected - and it was a huge cost savings (and a much more attractive look) than some of the frame mounted options of more than $1000. There were some oddities that I noticed. It was impossible to mount them exactly the way the instructions suggested because of where on the wings near the cab,. The brackets also could not stay on with the camper unloaded because they would hit the jack mounts, meaning they had to me bolted in after the camper was in the truck but before lowering the jacks, making the access to the bolts a frustrating 'feel for it' experience.I'f suggest the manufacturer secure the bolt so that you don't need to hold both sides when tightening/loosening, and also refine it to need less turns to do so. It took me 2 hours to mount the first time, and not much less when removing them with the limited access. The pads also came off in the first use.
I gave it a 5 star because I realize there are limited options for older campers and anything universal is going to have issues with some thing - so that's just my input and experience. Overall pretty reasonable for the price and functionality.
by: Pat03/20/2023
The product was shipped extremely quickly, it arrived 3 days after I ordered them. As far as the product goes I was extremely pleased that they were as easy to install as the product video showed them to be. I had been looking for
a tie down system that would work for my 2018 Ford since I purchased my camper in 2020 and after much research I found these at etrailer. One word of advice is that if your camper has a shower or other design that allows the camper to extend across the bed behind the wheel wells, either move the rear tie downs forward or shorten the leveling stud before you attempt to load your camper. On mine it turned out that once the tie downs were placed and attached I had to cut off about 3 inches of the threads.
Other than that it was an easy install although the bolts that attach the tie downs to the under lip clamp are a challenge to install but take your time and they will go on. I will post an update once I have been on the road for a few trip and see how they are working.
Thank you etrailer for your super fast shipping and online product videos.
by: Ed B.05/21/2019
Purchased the Brophy camper tie down set of four for the Palomino truck camper I just purchased. These are my second set as the first set were sold with my Hallmark camper. Easy to install and hold the camper in the truck with no worries.
by: James 05/20/2024
Ordered these for new camper. Very easy to install and does the job without the high cost of frame mount.
by: Jeff Smith10/22/2023
These tie downs work great. It holds my 3k lb Cabover camper in place without issues. And I live in my camper, so not losing my home is very important to me!!
by: Shelly12/13/2023
The products arrived on the time scale as stated. The packaging did not hold up and the box with the metal tie downs was broken open. There was too much weight for the box and it just split open. Not sure if anything is missing. Packaging of items that are heavy should be more secure and sturdy.
Jenny N.
12/14/2023
Oh no! I will have our Customer Service team reach out to you. If anything is missing we can take care of it.
by: Allen.08/22/2022
These wont work for my truck and camper. The box on a 2018 gmc 2500 short bed does not lend well to placement of these in order to get the correct geometry i needed for the tie-down points on my Palomino maverick 6601. I had high hopews of not having to buy the frame mounts, but i will have to.
Mike L.
8/31/2022
The HSSF tie downs have specific fit parameters as mentioned in the product specifications above: External bed rail width cannot exceed 5-12 Requires at least 2 of space beneath lip of bed rail Not compatible with -in bed liners, bed rails, double-walled beds, or side-step beds
Allen.
8/23/2023
In response to the etrailer comment response, they fit on the bed fine, with plenty of clearance and would work for a smaller camper. they just did not fit in the right spots for my truckcamper combo.
by: Ron W07/02/2016
As far as I'm concerned these are junk. Wasted my money. Do not mount in proper location on a 2011 Chevy Silverado 6.5' Bed. Because of the design of the bed rail the mounts cannot be installed in the proper locations for securing camper. The photos show the maximum forward and back that these can be mounted. Not at all made for the 6.5 foot bed 2007 or later Siverado. The Black Powder Coated Steel isn't that great either. Paint missing, dinged up from storage and shipping probably.
by: . George01/03/2024
The tie downs are great no problems.Very easy to install.I keep them on my truck all year long Thank you
by: Terry08/08/2023
Order arrived quickly, priced ok. Box was broken open by shipper NS the 4 T-bolsts bolts ere missing. Etrailer shipped ou the missing parts a few days later, but in the meantime I fashioned t-bolts I could use for my trip. Many customer comments on this camper Brophy tie-down match my experience. Etrailer follow up was great, but surely must be aware that their packing is sub-standard. Perhaps zip-tying the T-bolts to larger pieces would eliminate the loss even in case of breakage. Functionally the tie-dows were easy to install and seem quite adequate for off-road use of my in-bed camper. Will continue to use etrailer because of their excellent customer service.
by: captkirk02/15/2021
These tie-downs worked awesome for our pop up camper on our 1998 F150. Super snug, haven't loosened up or moved on the truck, camper hasn't budged either. I was leary at first not having the camper tied to the frame but now I have total faith in these tie downs.
by: Mike S05/23/2020
These Brophy tie downs have worked great over the past year. I leave the camper on the truck and it is my daily driver as well as RV. The camper weighs in at 1500 dry and about 2000 loaded. I do not do any radical 4x4 but I have taken some backwoods off road logging trails.
by: Bing09/23/2019
I received this tie downs on July, and first used it yesterday.
My Camper ‘s dry weight is about 1600 lb, and the products are good for my truck camper.
The problem was the position where tie downs were fitted on my truck. I tried several times to fitted tie downs to my truck.
by: Brent 08/08/2019
I bought these for our brand new 2019 GMC Sierra 1/2 ton because no custom options were available. I was happy that they were easy to install, and look great. I’ve used them in the past and have been happy with how they hold campers. Sure I’d rather have custom mounts from the frame, but for the price and because these are my only option that’s what I got. These will work just fine, and I like that I can swap these out on trucks.
The one thing I wish was different was that the threaded T handle portion would have a longer option. I had to fancy up a 2”x6” to run inside the side of my p/u bed so they would touch something.
As always another great shopping experience with etrailer. They haven’t let me down yet. Especially Lori, what a great customer service rep.
by: Patrick04/02/2020
These things are solid although i put duck tape on the T pads....installed 2014 Chevy Silverado 6.5 ft bed for 1200lb Starcraft.
Patrick
4/6/2021
Still have not moved! Great design and cost savings.
by: Matt04/14/2015
These camper hold-downs appear to be manufactured from good steel stock and should do the job nicely. I did have one piece that was slightly damaged but was not caught when packaged (the damage was not due to shipping). I was able to take a hammer to the bent steel and straighten it sufficiently to use the part. It was a little disappointing however, and should have been caught prior to shipping.
Overall I am pleased with the quality and price
by: Regan06/25/2019
Using on 2013 Ford F150 for a smaller cabover. Great quality product, shipped fast, works great. Had to turn bolts around to clear inside of bed. Held camper solidly over rough trails!
by: Bryce05/10/2022
Fits well on a First Gen Tundra. I was extremely unsure about fitment for my truck but they work great! Install only takes 5-10 minutes. I would definitely recommend. Steel is quite thick and seems very strong.
by: John05/25/2020
Easy to install and have done what’s expected. Keep the camper in place!!
by: JAMES K09/24/2012
ORDER ON TUESDAY RECIEVED ON FRIDAY NOON SAME WEEK ONLY PROBLEM WAS 4 7/ 16 NUT WERE 4 1/2 NUT HAD TO BUY 4 NUTS OTHER THEN THAT I WOULD BUY OFF ETRAILER AGAIN VERY GOOD SERVICE
by: Chuck11/13/2012
Found easy to install, I placed lock washers on the 8 3/8" bolts. Sold at Menards for 89 cents (pkg of 8) not in kit. Placement was a little restrictive with dealer installed bed liner. Takes 30 minutes to install all 4. Great buy.
by: Neil08/04/2021
Arrived on a rainy day with the box falling apart. Too much heavy steel to be loosely packed. Fortunately, the hardware bag was still there. Some bare metal showing. I had some emails with MacKenzie B. and they were responsive and without asking they offered me a 5% refund for the damage. After my first trip, they performed well on some very bumpy roads. Held strong and didn't move. I did have to re-adjust the lower standoffs after the first week. Taking them on/off is frustrating because the 2 nuts are in the small gap behind the clamp against the inner bed wall. Too tight for all but an open end wrench. 1/6 turn times too many fumbling tries, arg! Also, I was nervous not having a locking feature (lock washer, locknut, etc). I bought 8 locknuts (pinch type) and welded them to the inner plate. Then bought 8 round head hex bolts (grade 8). So now I can install easily with an Allen socket. See pictures. Recommend eTrailer consider this modification.
Neil
8/5/2022
After my mount bolt mod, Ive used these multiple times and they are working great! Very stout and no visible marks on my F250 bed.
by: Jason S.06/05/2019
These tie downs were a great budget solution in leu of a permanent installation of my camper shell and/or frame mounted tie downs. Aside from needing to plan their placement (they can hang in front of the gas cap if you don't plan it right the first time around... no, I didn't accidentally block my gas cap... maybe I did) and take into consideration they also need a little bit of internal clearance as well, they work just fine. I haven't noticed any cargo shifting nor warping of the truck bed around where they are installed. My camper shell is under 1K lbs and it holds just fine.
Jason S.
6/8/2020
A year later & they still hold strong.
by: Dayton12/15/2023
Awesome customer service my new fav pl ace
by: dave07/08/2016
Its a good product for a light camper. I personally would not use it on anything heavier than 1000lbs. But then iam not an engineer. I sold mine and my camper and bought frame mounted tie downs
Dave
7/11/2017
Did not work for me. Tried to send them back but shipping would cost a bundle so i would get less than half of what i paid. Sold them same day on-line. Not good for a larger camper.
Rachael H.
7/12/2017
25
218
Show More Reviews
See what our Experts say about this Brophy Camper Tie-Downs
- Truck Bed Camper Tie-Downs for 2007 2500Chev Crew Classic According to my contact at CR Brophy, the # TDSF stake pocket camper tie down isn't compatible with your truck. The # HSSF clamp style tie down will work as long as your truck bed has two inches of available space under the truck bed sidewall as shown in the provided diagram. You'd also need the hardware package, part # TDHP which includes the chains, turnbuckles and hooks to connect the tie-downs and the camper.
view full answer...
- Will Camper Hold Downs, # HSSF, Fit a 2007 Chevy Silverado 2500 Duramax Long Wheel Base Crew CabAs long as your 2007 Chevy Silverado is not a step side, does not have a double wall bed, and is not a dually, then you can use the Camper Hold Downs, # HSSF. I have included a link to the installation instructions for you to view. We also recommend using the Camper Tie Down hardware package, # TDHP, to secure the camper to the tie downs.
view full answer... - Difference Between The Brophy Camper Tie-Downs HSAB And HSSF The Brophy # HSAB and # HSSF are essentially the same thing with the exception that the # HSAB has a small bend in it to make connecting to your turnbuckles easier. If you're still needing turnbuckles you can use part # TDHP.
view full answer... - Which Brophy Camper Tie Downs Fit 2019 Nissan TitanBrophy tie downs, # HSSF, will work well for your 2019 Nissan Titan. The Brophy tie downs don't have a specific vehicle fit list but this is the kit we've found works best on import truck beds. The part # HSBP would not be the kit I would recommend as Brophy has told us it does not fit import trucks well. This setup is rated for use with any camper that fits the bed dimensions of your truck so it would work well with yours. I also recommend hardware package # TDHP to secure the camper...
view full answer... - Truck Bed Camper Tie Down Recommendations for a 2013 Ford F-150The Brophy Camper Tie Downs, part # TDSF can be used on campers that have a total length of up to 8 feet in length. The Brophy Camper Tie Downs, part # HSSF can be used on any size campers. There is no weight capacity rating on the camper tie downs and they will work for any camper size that is properly sized for your 2013 Ford F-150. The Brophy # TDSF mounts into the truck bed stake pocket, where as the Brophy # HSSF tie downs wrap around the bed, not in the stake pockets, and are...
view full answer... - Will Brophy Camper Tie Downs Fit a 2007 Dodge Ram 1500 with Spray-In BedlinerIf you do have 2 inches underneath the bed rail then you can use the Brophy camper tie downs # HSSF on your 2007 Dodge Ram 1500. I also recommend hardware package # TDHP. If you do not have the necessary clearance then the best option is going to be custom tie downs that attach to the frame. I have included a link to the custom tie downs for your truck. Use the drop down menu to select the version that describes your truck to see the options that fit.
view full answer... - Camper Tie-Down Recommendation for 2005 Dodge Ram 2500We do offer Brophy tiedowns that will fit your 2005 Dodge Ram 2500 as long as it does not have a stepside bed or dual rear wheels. The Brophy tiedowns that will work for your application is part # HSSF. The hardware kit you would need to attach the tie-downs to the camper is the part # TDHP.
view full answer... - Will Brophy Clamp On Camper Tie-Downs Work On 1969 Ford F-250 And 3000-Lb CamperWhen installing the Brophy Clamp On Camper Tie-Downs, part # HSSF, there are just a couple things you will need to know. The top of the bedrail cannot be wider than 5-1/2 inches, and the side of the truck bed cannot have an enclosed or double side wall. The truck cannot have a liner and it cannot be a dually. My contact at Brophy said the tie-downs are well capable of handling your 3,000-lb camper and the sidewalls on the truck will give before these tie-downs fail.
view full answer... - Camper Tie Down Recommendation for a 1997 Ford F-350 DuallyYes, the Camper Hold Downs part # HSSF will work on your 1997 Ford F350. There is no weight capacity rating on the camper tie downs and they will work for any camper size that is properly sized for your vehicle. The weight capacity will be on the Brophy Camper Tie Down Hardware Package, part # TDHP that is used to attach the camper to the tie downs. The hardware package has a weight capacity of 3,000 lbs.
view full answer... - Camper Tie-Downs When Running Boards Under BedSince your running boards are also under your bed you will need to use Brophy # HSSF Bed Mount Tie-Downs that install in your stake pockets. You will also need the Brophy # TDHP basic turnbuckels.
view full answer... - Fitment of Tie-Downs for 2005 Dodge Ram Pickup 3500 DuallyFor your 2005 Dodge Ram Pickup, 3500 series Dually with 8 foot bed I suggest, the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear, # TLD3109 and Front, # TLD2101. The tie-down inserts can be easily removed from frame-mounted receiver brackets with included pins. The brackets fit tight to truck frame - no loss of ground clearance. All necessary hardware included. These currently have a 4.8 rating from over 700 reviews. Please note the linked installation videos below. The Brophy...
view full answer...
- Can the Brophy Clamp On Camper Tie-Downs Be Used On a Ford F-150 with Aluminum BedWe have spoken with Brophy in the past and for a Ford F-150 with aluminum body such as your 2017 model they recommend using the Brophy Clamp On Camper Tie-Downs part # HSSF. There won't be any issues with these tie downs and an aluminum bed so long as you are not exceeding other figures such as payload capacity etc. In order to secure the truck bed camper to these tie-downs you will also need the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs part # TDHP. Although certainly...
view full answer...
- How Tight to Make # HSSF Turnbuckles for 1997 F-250 Carrying 9-Foot 2500-lb Slide in Truck CamperThe Brophy Camper Tie Downs # HSSF that you referenced do not carry a specific weight or torque capacity since this really is a consideration for the truck that is hosting the slide-in camper. The turnbuckle hardware included in this kit should be hand-tightened as much as you need to, but no tools should need to be used. My contact at Brophy pointed out that, as noted in the instructions that I have linked for you, the front holdowns should be positioned as far forward as possible on...
view full answer... - Recommended Clamp On Bed Mounted Camper Tie Downs for a 2001 Dodge Ram PickupFor a set of clamp on camper tie downs that have been confirmed to fit your 2001 Dodge Ram Pickup I recommend using the Brophy Clamp On Camper Tie-Downs part # HSAB. I have attached a photo for you on a truck from the same generation to show fit. The Brophy Clamp On Camper Tie-Downs part # HSSF should also fit but we have not yet tested this. It looks like you may need the angled lip to clear the bed sides so I do recommend using part # HSAB. The angled lip is the only difference between...
view full answer...
- Will Brophy Camper Hold Downs # HSSF and # TDSF Fit 2014 Dodge Ram PickupBoth of the Brophy Camper Tie Downs you referenced, Stake Pocket type # TDSF and clamp-on type # HSSF, are general-application products that fit a wide range of trucks with just a few exceptions. The better option for your Ram, as long as it does not have a bed liner that blocks access to the underside of the rail, is the # HSSF. This kit uses a clamp-on installation (please see the linked photo) which gives you the flexibility to remove the tie downs, unlike the # TDSF which is a permanent...
view full answer...
- Camper Tie Down Recommendation for 2013 RamYes, the stake pocket camper tie downs, # TDSF, will work on the 2013 Dodge Ram, as long as the overall length of the camper you are using them with is 8 feet long or less, this measurement includes the overhang over the cab of the truck. You will need to drill one 11/32 inch hole and two 7/32 inch holes for this installation, and there are spacer tabs on the tie downs that may need to be pried off for a proper fit in your stake pockets. If your truck campers overall length is longer...
view full answer... - Camper Tie Down Recommendation for a 2014 Ram 1500 with Running BoardsI have a set of camper tie downs that will fit your 2014 Ram 1500, but they attach at the stake pockets of the bed and not the frame like the Torklifts do. There is no Torklift option for your truck if it has running boards. The Brophy Camper Tie Down, part # HSSF is a universal fit item and will work on your 2014 Dodge Ram 1500. The Brophy Tie Down mounts over the sidewall of the truck bed. The recommended hardware kit to install part # HSSF is Camper Tie Down Hardware Package, part...
view full answer... - Recommended Brophy Stake Pocket Camper Tie-Downs For 2011 GMC Sierra 2500 With 8' BedI have another option for you, but the Brophy Stake Pocket Mounted Camper Tie Downs - Bed Mount - Black Powder Coated Steel - Qty 4 # TDSF you were looking at are not designed to fit the 2011 and newer GMC trucks. For your 2011 GMC Sierra 2500 8' bed you will need to go with the Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 # HSSF which is confirmed to fit your truck. This will give you a great spot to secure your truck bed camper to your bed. If you...
view full answer... - Best Fitting Brophy Camper Tie-Downs For 2004 GMC Sierra 2500 HD Duramax I spoke with Brophy and they stated the Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 Item # HSSF would be the best fit for your 2004 GMC Sierra 2500HD Duramax. You'll also want some turnbuckles, which I recommend the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs - 3,000lbs - Qty 4 Item # TDHP.
view full answer... - Do Brophy Clamp On Camper Tie-Downs Have A Weight CapacityThere is no weight capacity for the Brophy Clamp On Camper Tie-Downs # HSSF. The tie-down hardware kit # TDHP, that is used to secure the camper to the # HSSF tie-downs has a weight capacity of 3,000-lbs. My contact at Brophy said the tie-downs will handle the camper and the concern would be if the truck capacity was not able to handle it, but with an F-350 you should have no issue. Since the front tie-down is behind the camper tie-down, the rear tie-down must be forward of the camper...
view full answer... - Will Brophy HSSF or TDSF camper Tie Downs Damage the Bed on a 2014 Ram 1500I have not heard of anyone complaining about the stake pocket tie downs # TDSF damaging the truck bed. The same for # HSSF. I find the stake pocket option to be a less invasive installation as well. The process of installing the tie downs would not flex the metal of the bed. But if someone where to then use associated hardware # TDHP and over tighten it then I could see how someone could bend the metal of the bed where the tie downs are installed. The best truck bed camper tie downs...
view full answer... - No Drill Camper Hold Down Recommendation for 2015 Chevy Silverado Bed RailThe Brophy Camper Hold Downs part # HSSF is a bed mounted camper tie down that doesn't require any drilling to install. I attached an install video for you to check out as well. You will also need the hardware kit part # TDHP to secure the camper to the # HSSF.
view full answer... - Camper Tie Downs for a 2011 Dodge Ram 1500 Long BedFor your 2011 Dodge Ram 1500, Tork Lift does not have an option but the best option we can offer is the Brophy tie downs # HSSF that you have referenced. These will fit provided you do not have a stepside or double wall bed or a dually. For a hardware kit use # TDHP. I have linked installation instructions for you.
view full answer... - Will Brophy Camper Tie Downs # HSSF Work With 2009 Dodge Ram 1500 Quad Cab 2WD TruckThe Brophy Camper Tie Down, part # HSSF is a universal fit item and will work on your 2009 Dodge Ram 1500 2WD Quad Cab. There is not a weight capacity for the hold downs, and will work with any camper that fits your truck. Part # HSSF works with trucks that have spray-in bedliners. If your truck has a drop-in bed liner, it will need to be trimmed or removed to use part # HSSF. The Brophy Tie Down mounts over the sidewall of the truck bed. The recommended hardware kit to install part #...
view full answer...
Do you have a question about this Camper Tie-Down?
Used Items Available
Condition: Surface Scratches
Notes: Parts are scratched up, seems to be some signs of instalation, otherwise fine.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Brandon M
Expert Research:
Adam R
Expert Research:
Jeffrey L
Expert Research:
Sarah H
Video Edited:
Zack K
Video by:
Patrick B
Installed by:
Matthew K
Installed by:
Cole B
Updated by:
Rachael H
Updated by:
Amanda M
Updated by:
Manda E
Updated by:
Amanda K
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ed B.
5/22/2020
No problems. Would buy again. Very easy to take on and off the truck.