Camper Tie-Downs When Running Boards Under Bed

Question

Question:

Thank you Les for your reply. My 1500 sierra has running boards under the truck box running clear to the rear tires. What would you suggest.

asked by: GORDEN M

0

Expert Reply:

Since your running boards are also under your bed you will need to use Brophy # HSSF Bed Mount Tie-Downs that install in your stake pockets. You will also need the Brophy # TDHP basic turnbuckels.

expert reply by: Les D

0

Answer 1

view full answer...

Answer 2

The camper tie-downs I recommend for a 2020 Chevrolet Silverado 2500 are the TorkLift Custom Frame-Mounted Camper Tie-Downs since they are most secure and a custom fit so no modifications are needed. The correct kit for the front is part #TLC2225 and…

view full answer...

Answer 3

When installing the Brophy Clamp On Camper Tie-Downs, part #HSSF, there are just a couple things you will need to know. The top of the bedrail cannot be wider than 5-1/2 inches, and the side of the truck bed cannot have an enclosed or double side…

view full answer...

Answer 4

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Hey Michael, thanks for reaching out! The EcoHitch #EH57FR sits a little higher than the Curt #C52NR so it will give you better ground clearance for your 2024 Chevy Silverado 2500. The EcoHitch is a bit more recessed into the front bumper than the…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

view full answer...

Answer 12

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Camper Tie-Downs When Running Boards Under Bed

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching