V Stop for Sail Boat Trailer with 1/2" Bolt
Question:
My sailboat trailer King manufacturing has a black bow stantion roller. I want to switch out to a 3 inch V stop that is non marring. The sailboat has a fine bow entry. I’m looking for advice for a good V stop. My bolt hole is 1/2 inch. Can a 3/8 inch be drilled out to 1/2 inch, if needed? Thanks.
asked by: Kyle
Expert Reply:
While you could drill out the hole on your V stop to accommodate the 1/2" bolt, it would probably lose some of the strength and there's always a chance that you could split the rubber/plastic molding; your best bet in these situations, since they are readily available, is to just use a bow stop with a 1/2" hole already in place.
I recommend going with the CE Smith Y Style Bow Stop for Boat Trailers # CE29554 which is made from a non-marring PVC. This bow stop has a 2-3/4" base and a 4-1/4" span. If you needed a bow stop with a larger base, the Yates Bow Guard # YR7Y44-4 has a 4" base and a 7" span to provide for a wider hull.
Products Referenced in This Question
CE Smith Y-Style Bow Stop for Boat Trailers - PVC - 4-1/4" Span - 1/2" Shaft - Amber
- Boat Trailer Parts
- Guards and Pads
- Bow Stop
- 2-7/8 Inch Wide
- PVC
- 2-3/4 Inch Long
- Fits 1/2 Inch Shaft
- CE Smith
more information >
Yates Y-Style Bow Stop for Boat Trailers - Heavy-Duty Rubber - 7" Span - 1/2" Shaft
- Boat Trailer Parts
- Guards and Pads
- Bow Stop
- 4 Inch Wide
- Black Rubber
- 4 Inch Long
- Fits 1/2 Inch Shaft
- Yates Rubber
more information >
Product Page this Question was Asked From
CE Smith Y-Style Bow Stop for Boat Trailers - PVC - 4-1/4" Span - 1/2" Shaft - Amber
- Boat Trailer Parts
- Guards and Pads
- Bow Stop
- 2-7/8 Inch Wide
- PVC
- 2-3/4 Inch Long
- Fits 1/2 Inch Shaft
- CE Smith
more information >
Continue Researching
- Shop: Yates Y-Style Bow Stop for Boat Trailers - Heavy-Duty Rubber - 4" Span - 3/8" Shaft
- Shop: CE Smith Y-Style Bow Stop for Boat Trailers - PVC - 4-1/4" Span - 1/2" Shaft - Amber
- Video: CE Smith Spare Tire Carrier for Trailers Review
- Q&A: Correct Replacement Tire and Wheel for 2021 Triton PWC Trailer
- Q&A: Correct Inflation Pressure for Trailer 4.80-12 Trailer Tires
- Shop: CE Smith Bow Roller Bracket for Winch Stands - Pre-Galvanized Steel - 13-3/16" Tall - Bolt On
- Shop: Loadstar 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Shop: CE Smith Spare Tire Mount for Trailers - Steel - 4- and 5-Lug Wheels - 12-1/4" Long
- Shop: CE Smith Bolster and Swivel Bracket Assemblies for Roller Bunks - Galvanized Steel - Qty 4
- Shop: Powerbuilt Bottle Jack - 8-1/4" to 16-5/16" Lift - 24,000 lbs
- Search Results: ce31013g
- Q&A: Mounting Bolt Pattern of Buyers Products 337HW800S 800 lb Trailer Winch
- Video: CE Smith Boat Trailer Parts - Winch Stand - CE31013G Review
- Video: Buyers Products Trailer Winch - Standard Hand Winch - 337HW800S Review
- Video: CE Smith Multi Sport Plus Boat Trailer with Bunks Review and Assembly
- Video: Buyers Products Trailer Hand Winch Review
- Video: CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE32005G Review
- Video: Yates Boat Trailer Y-Style Bow Stop Review
- Q&A: Y-Style Bow Stop For Tri-Hull
- Q&A: Size of Mounting Holes on Base of CE Smith Galvanized Winch Stand CE31013G
- Q&A: Weight Capacity of the CE Smith Winch Stand Part # CE31013G
- Q&A: Winch that Could Fit in CE Smith Bow Roller Bracket # CE31005PG
- Search Results: 44649
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 68149
- Shop: Trailer Wiring
- Article: Trailer Tire Sizing
- Search Results: 25580