SeaSucker Cutting Table - Vacuum Mount - White - 18" x 12"

Video Transcript for SeaSucker Marine Boat Accessories - Tables - 302-5135 Review

Today we're gonna take a look at the SeaSucker Marine vacuum mount small 12" by 18" cutting table. Now, this will give yourself a little extra workspace on your boat by bringing along this vacuum mount cutting table. It will easily mount to your transom to give you room to cut the bait or filet your catch. Basically, when you install this to your transom, the tray will hang over the side of the boat so that you can quickly dispose of the remains while keeping your boat clean. This can be mounted flush against the inside of the transom on the boat trip out for a low profile storage. Just suction it on like that for storage.

If you notice, the vacuum mount on this is a 4-1/2" diameter vacuum mount. The pull rating on it is 120 pounds. If you notice, it is white in color. This part is made in the USA. The other nice thing, it comes with this little tube of waterproof lubricant, and what that's used for is the plunger on the vacuum mount. What will happen is this plunger is what you'll push to get the vacuum.

Over time, you might get some dirt in there or grime. You can pull that plunger out, clean off that gasket, put the waterproof lubricant on there, put your plunger back in, and it'll work good as new. Now a few dimensions on this table. Overall width is about 18". Depth on it is 12". Height is about 4-1/2" tall.

Now, the work surface area, the inner portion that you can work on, is about 11" by 17". The last thing I want to do is give you a demo of how this vacuum mount works. So we're gonna pop off the cover, comes with this nice, hard, plastic cover to protect the vacuum mount. So what I'm gonna do is just put it up against this back wall back here so you can see. What you want to watch is this plunger has an orange ring on it, so you just push it up against a flat surface, and then you just start pushing the plunger and you'll notice as you start pushing it that orange ring will disappear. Once that orange ring disappears, it has enough vacuum in it.

You can see it's holding it on there very secure. Then to release it, there's a tab here and one at the bottom, so if you just get behind the tab and you push it, if you push it down enough, there you go, it will release it. There's a tab here and one at the bottom. So it makes it very easy to install and very easy to remove. But that should do it for the review on the SeaSucker Marine vacuum mount small 12" by 18" cutting table.