Parts Needed to Flat Tow a 2016 Chevy Silverado 1500

Question:

Do you have a wiring kit for a 2016 silverado 1500 pick up, that goes with the RM-3176-3 kit? Can it be tied into the existing wiring or do you have to install new additional bulbs in the tail lights and run wiring from the front to back?

asked by: Owen B

Expert Reply:

For lighting for your 2016 Chevy Silverado 1500 you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.

I attached an install video that shows a similar diode kit being installed in a similar 2014 Silverado.

The base plate kit part # RM-3176-3 is a confirmed fit for your truck as well.

The most popular compatible tow bar is the Falcon 2, # RM-520. For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground.

And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.

Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.

I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.