Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 3/4" Thick
Item # RM-035
Our Price: $120.29
Confirmed to Fit
2021 Jeep Gladiator
Off-Road bumper - with 3/4 inch D-Ring bumper mounts
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (138)
- Q & A (0)
- Photos
- Used (1)
2021 Jeep Gladiator - Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 3/4" Thick
- Roadmaster
- Aftermarket Bumper Adapters
- Hitch Pin Attachment
Use your Roadmaster tow bar to tow your off-road Jeep Gladiator behind your motor home with these adapter brackets. They attach to the 3/4" thick shackle mounts on your bumper where the D-rings are attached.
Features:
- Adapter brackets let you use your Roadmaster tow bar to tow your off-road vehicle with bumper-mounted D-rings
- Brackets attach to 3/4" thick shackle mounts on bumpers approved for flat towing
- Fast, simple installation
- Replace quick-disconnects from tow bar arms with adapter brackets
- Remove D-rings from bumper and attach tow bar to shackle mounts
- Attachment pins fit 7/8" and 1" diameter mounting holes
- Compatible with all Roadmaster motor-home-mounted tow bars
- BlackHawk
- BlackHawk All-Terrain
- BlackHawk 2 All-Terrain (RM-422)
- Falcon (RM-520)
- Falcon 2
- Falcon 5250
- Falcon All-Terrain (RM-522)
- Nighthawk All-Terrain (RM-676)
- Sterling
- Sterling All-Terrain (RM-576)
- Limited Lifetime Warranty
Tow your off-road vehicle with your Roadmaster motor-home-mounted tow bar using these adapters. Simply attach the adapters to your tow bar's arms in place of the quick-disconnects. Then remove the D-rings from your Jeep's bumper and hook the tow bar up to the shackle mounts. These adapters fit shackle mounts that are 3/4" thick. They attach to the mounts using the holes where the D-rings are mounted. The adapter pins include sleeves that allow them to fit in both 7/8" and 1" diameter holes.
035 Road Master Towbar Adapter for Jeep D-Ring Bumper Mounts - 3/4" Thick Mounts
Installation Details
Customer Satisfaction Score:
88% were satisfied with this product
12% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 3/4" Thick - RM-035
Average Customer Rating: 4.8 out of 5 stars (138 Customer Reviews)
Use your Roadmaster tow bar to tow your off-road vehicle behind your motor home with these adapter brackets. They attach to the 3/4" thick shackle mounts on your bumper where the D-rings are attached.by: Nicholas03/06/2024
Jeep
Exactly what we needed for extending the electric connection from our RV to our Jeep. Fits perfectly and gave me just the right amount of length so there is no stress on the connection. Highly recommend
by: Joel P.08/16/2017
2009 Jeep Wrangler
The adapters were exactly as described. This is the only way to go when attaching a Roadmaster tow bar to your d ring bumper. Took a bit of force, but I was able to press the provided bushings into the d ring.
by: Ronn w08/20/2016
2002 Jeep TJ
These are what I had been looking for and they wernt even available from the manufacturer. They come with a slip in sleeve for one inch clevis tabs but are 7/8 hole and 3/4 inch wide slot. I'm using it on the falcon 2 tow bar. These ends come with slip on tips that must fit a different bar from the vendor BUT they can just be unbolted and are a direct fit to my thread on ends of my tow bar. Perfect fit! See photos of the last end pieces I tried as well from Amazon.
Ronn W.
11/1/2017
After a year of towing your product was still working perfectly. The stainless s spacers were a great asset. Thank you for a wonderful product!
by: Vern06/03/2024
I think I ordered wrong because I could not use sockett portion but the the d-ring adapter worked with my old threaded pats on my falcon5250 tow bar. thanks for asking but it does seem like a waste to to dicard 1/2 of the new part.
by: Jeff Johnson05/09/2020
I have a Jeep JKU with an aftermarket front bumper. This product allows me to use the D- ring mounts to tow the Jeep with my Falcon 2 tow bar. It worked perfectly no problems. The longest trip towing the Jeep was from SoCal to South Dakota and back. This setup worked flawlessly. One of the awesome things about this product is it came with inserts that allowed me to use these with my 1 inch diameter D ring holes because these are 3/4 inch
by: villageidoc10/22/2017
2016 Jeep Wrangler
Tow bar adapters arrived within 4 days of placing my order. The adapters fit perfectly onto the D rings of my aftermarket bumper for my 2016 Jeep Wrangler and onto my old Roadmaster 5250 tow bar. Now I can tow my Jeep behind my motorhome.
by: David 03/13/2024
Works good and was a good value. Customer service as always was spot on.
by: Joseph 07/25/2023
This is the right part to connect a Demco Excalibar 3 to a pair of Maximus-3 Front Tow Loops.
by: Daniel D.05/12/2017
2012 Jeep Wrangler
These two products made it possible to tow my lifted jeep with an after market front bumper thousands of miles without any issues
by: Anthony 08/03/2023
I have purchased numerous times from your company and have always been satisfied with quality, pricing and delivery times, you have a great company
by: George B06/07/2016
2008 Jeep Wrangler
I have a 2008 jeep wrangler which I tow behind my motorhome. The Roadmaster tow bar was set up for stock bumpers but I am now installing off road bumpers with a winch. These adapters install replace the original tow bar ends and will allow me to tow the jeep using the D-ring mounts. It took me five minutes to install them and although I have not towed the jeep there is no reason they will not work as expected. They will also allow any vehicle with a 2" rear hitch receiver to tow another vehicle with D-ring attachments. Great for off road enthusiasts.
George B.
6/7/2017
Perfect!!!
by: mini4mw02/27/2023
These fit perfectly with the Maximus-3 tow loops for the Wrangler. I did not need the sleeves on the pins. The maximus-3 tie rod with maximus-3 supplied quick disconnect bolts fit as well.
by: Robert10/25/2017
Roadmaster
These mounts are part of the excellent Roadmaster tow bar system. With these mounts I can leave the Roadmaster cross-bar in the garage and use the shackle mounts in the bumper instead. Takes a bit of creativity to arrange for safety cable connection points and a new place to hook the winch cable but these efforts are well spent in order to clean up and simplify the tow system. Kudos to Roadmaster for this item and to etrailer for making it available.
This comment applies to both the RM-035 and the RM-035-1.
Robert
10/25/2018
Many miles later the mounts are working great!
by: Charles08/09/2018
Jeep Wrangler
These adapters are exactly what I needed. Looks like they will work perfectly to interface my Blue Ox tow-bar with my Jeep aftermarket bumper with D ring attachment points. Now i can tow either my Yukon XL or my Jeep Wrangler with one tow bar. Good Job Troy H!
Charles
8/9/2019
All is working as desired. Continue to be pleased. Thanks!
by: Dennis05/06/2017
They said it was for a road master tow bar but after doing some research they fit a demo perfect very well built and they look very strong .I am really satisfied Demco wanted 249.00 for there adapters and these were a lot less
Dennis
5/6/2018
Fantastic
by: CT12/16/2023
Very heavy duty.
by: Ed02/24/2023
Works great to flat tow our wrangler using the the d- ring mounts
by: Richard 09/06/2023
Fits perfectly; durable; quality finis h;
by: Darren 10/01/2023
Very helpful and prompt support as alwa ys!
by: Randy10/24/2018
This piece will not work the way you said it would work. Very disappointed The falcon to towbar will not connect to these Fittings! The part that connects it to the falcon 2 Has a threaded end on it . The piece you sent me has a bolt that goes through a pipe that is approximately 1 inch. The threaded in on a falcon two is approximately 3/4 of an inch. Part totally wrong in every way
Heather A.
10/30/2018
You are basically just replacing the swivel ears on the falcon 2 tow bars part # RM-520 with these adapters part # RM-035. Take the round nut off of the tow bar and mark the area where the round nut attaches to the end of the tow bar inner arm. Using the shoulder bolt that comes with the kit, nylon washers and nylon lock nut attach the original round nut with the tow bar attached to the adapter. The round nut cannot be moved forwards or backwards from the area that you marked or the shoulder bolt will not fit. If the round nut has moved the shoulder bolt will not hold the round nut in place causing it to rotate.
by: Brian02/14/2018
Jeep Wrangler
I've been very pleased with the Falcon tow bar. It was easy to setup and is easy to use. It handles my lifted Jeep Wrangler with ease, and has worked exactly as I expected it to. I use it with RM-035 D-Ring bumper adapters, and connecting the tow bar to my Jeep's bumper shackle mounts takes but a moment. It really couldn't be much easier to hook up and go. I also like the enclosed channels that manage the safety cables and light wiring, which makes for a very clean, un-cluttered towing setup.
by: Robb04/07/2022
2002 Jeep TJ
Very robust and well built product. Product came with all the necessary hardware for perfect fitment on our 2002 Jeep Wrangler. The reason for the 4 vs the 5 star review is the fact the finish was damaged on one of the anchors when received. This doesn't affect the performance of he product, however it was unfortunate to see. It is possible however that the finish damage happened during shipping, although everything was fairly well packed so I am unsure. Either way, I would highly recommend this product for anyone needing proper tow bar anchors for oversized bunpers.
Jenny N.
4/15/2022
I will have our Customer Service team reach out to you. I recommend touching up the affected areas with a rust resistant paint like Rustoleum.
Helpful Links
by: Ed S.04/16/2017
Jeep TJ
Towed my Jeep TJ behind my motorhome all last summer using these with a Roadmaster Falcon All-Terrain towbar, connected to the tow points of the TJ's JCR Offroad TJFM-TX front bumper - no problems so far. These items greatly simplified the hitch arrangement, eliminating the low hanging square tube attachment points and crossbar of the original Falcon kit
by: Steve10/20/2018
Jeep
The ends are heavy, strong , well made, fit my existing tow bar and work just fine ( as advertised). I ordered them to replace another style end due to changing tow vehicles, and the mounting point style/setup on the jeep. The ends have a 1" ID measurement. On the vehicle i went with a bracket setup from Maximus-3. There a frame mounted bracket setup using U-Bolts. There a D-Ring/tow loop setup. The bracket end, or ear where pin goes thru is 3/4" wide. This leaves a 1/4" of slop when mounted, which I wasnt 100% thrilled with. So, I ended up adding a thick washer on each side to take up the 1/4" of slop. A little bit of a pain when hooking g/un-hooki g, but completely functional with no issues. I called maximus to see if they could make their bracket in 1" wide matl and they said no, not an option. Again, all in all functional..
by: Chris P06/08/2019
Jeep
Works great. Fits the D rings on my Jeep perfect.
25
138
Show More Reviews
See what our Experts say about this Roadmaster Tow Bar Base Plate
- Parts Needed to Flat Tow 2015 Jeep Wrangler Unlimited Rubicon With Smittybilt Bumper & 10 Inch RiseWe can get your 2015 Jeep Wrangler Unlimited Rubicon with a Smittybilt bumper set up for flat towing, including the correct high-low adapter to make up that large 10" height difference between the D-rings and your hitch. To make it easy, I'll create a list of the parts you'll need for your Jeep. - Base Plates: 3/4" Shackle Mounts: Adapter for Jeep D-Ring Bumper Mounts - 3/4" Thick # RM-035 OR - 1" Shackle Mounts: Adapter for Jeep D-Ring Bumper Mounts - 1" Thick # RM-035-1 - Tow Bar: Roadmaster...
view full answer... - Recommended D-Ring Adapter To Flat-Tow 2019 Jeep Wrangle With Aftermarket Off-Road BumperAs long as the Iron Cross bumper on your 2019 Jeep Wrangler is flat-tow rated and has D-Rings that are 3/4" thick or 1" thick you can use the bumper instead of base plates for flat towing. You will need to contact Iron Cross directly to confirm that you can flat tow with your bumper. If you bumper is flat-tow rated you can use the Roadmaster Adapter for Jeep D-Ring Bumper # RM-035 if the D-Rings are 3/4" thick or the Roadmaster Adapter for Jeep D-Ring Bumper # RM-035-1 if the D-Rings are...
view full answer... - Tow Bar and Adapters to Flat Tow a 1999 Jeep Cherokee With D RingsI do have a tow bar solution for you, but the first thing that you will need to be able to tow your 1999 Jeep Cherokee with the D Rings is an adapter. Since most cars usually install base plates for flat towing, we will need to use an adapter, like part # RM-035-1 which are for 1 inch shackle mounts or # RM-035 which are for 3/4 inches shackle mounts, to be able to connect your D rings to the tow bar. Keep in mind that your D rings need to be rated for flat towing. The Roadmaster Falcon...
view full answer... - Recommended Safety Cables For Use With D-Ring Adapter Mounts For 2004 Jeep WranglerThe Roadmaster Sterling All Terrain, Non-Binding Tow Bar - Motor Home Mount - 2" Hitch - 8K # RM-576 will have the cables completely removed from the system when using the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 3/4" Thick # RM-035. These cables do not have adapters available for the ball end. I recommend the RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000 lbs # RM-643 for this application.
view full answer... - Items Needed to Flat Tow a 2016 Jeep Wrangler UnlimitedThe Demco Dominator Non-Binding Tow Bar for Blue Ox Base Plates, # DM9511008-BX comes with needed safety cables so that is three of the 5 primary items needed to flat tow your 2016 Jeep Wrangler Unlimited. To attach this tow bar to D-rings on your aftermarket bumper, you will first need to verify it is a towable bumper as not all are rated for this. You will need to contact the manufacturer for that information and then identify what size D-ring adapters are needed, most options are 3/4",...
view full answer... - Compatibility of Roadmaster Blackhawk 2 Tow Bar with D-Ring Bumper Mounts of Smittybilt XRC Gen2 For your 2020 Jeep Wrangler Unlimited Rubicon with Smittybilt XRC Gen2 Bumper, the manufacturer doesn't give the d-ring mount thickness, but we have two options for you. The Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 3/4" Thick # RM-035 will fit 3/4 inch thick shackle mounts with pin hole diameter of 7/8 inch or 1 inch. The Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 1" Thick # RM-035-1 will fit 1 inch thick shackle...
view full answer... - Adapter for Jeep D-Ring Bumper MountWe do carry an adapter for Jeep D-Ring bumper mounts, the # RM-035-1 and # RM-035. However these are for Roadmaster tow bars such as the Sterling All Terrain, Non-Binding Tow Bar, # RM-576. Currently there is not a D-Ring bumper mount for the etrailer XHD Non-Binding Tow Bar, # e94ZR.
view full answer... - Flat Towing 1997 Jeep Wrangler Automatic Yes, the Jeep Wrangler (1997-2021) is the most popular flat tow vehicle among RVers. Thanks to its modest size, the Wrangler is a great option to pull behind both Class A and Class C motorhomes. The Wrangler has no speed or distance restrictions when being flat towed. Plus, both manual and automatic transmission models can be safely towed. First with the base plates, I suggest the Roadmaster EZ5, # RM-521424-5 if you have either a U-channel bumper or a double tube bumper. If you have...
view full answer... - Parts Needed To Flat-Tow a 2021 Jeep Gladiator with AEV Front BumperI did some research online and it looks like the AEV Front Bumper for the 2021 Jeep Gladiator uses 3/4" d-rings and in which case you can use the Roadmaster Nighthawk All Terrain Tow Bar part # RM-676 with the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Tow Bar part # RM-035. In order to complete your setup you'll still need the Roadmaster Universal Hy-Power Diode Wiring Kit part # RM-154 and some sort of braking system like the Brake Buddy Select 3 Portable Supplemental Braking...
view full answer... - Does Roadmaster Nighthawk Tow Bar Work with D-Ring Adapter part # RM-035The Roadmaster D-Ring adapter part # RM-035 will fit on the Roadmaster Nighthawk # RM-676 tow bar that you also referenced.
view full answer...
- Can The Roadmaster D-Ring Mount Adapters Be Used On The Demco Dominator Tow Bar No, the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars # RM-035 is only compatible with Roadmaster branded tow bars. For a Roadmaster tow bar similar to your Demco Dominator I recommend the Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar w/ LED Lights # RM-676. This tow bar has an 8k weight capacity and integrated LED lights that illuminate with your RV tail lights. I also highly recommend ensuring with the manufacturer that your Smittybilt XRC Gen...
view full answer... - Parts Needed to Flat Tow a 2017 Jeep Wrangler Unlimited with the Even Brake System # RM-9400The parts needed to flat tow your 2017 Jeep Wrangler Unlimited include a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and possibly a high-low adapter. Since you have D-Rings on your front bumper you will need an adapter like part # RM-035 or part # RM-035-1 for 3/4" or 1" thick D-Rings respectively. These allow you to then use a tow bar like the recommended Falcon All Terrain # RM-522 that features a non-binding design and safety cables...
view full answer... - Base Plate and Tow Bar Compatible with a 2013 Jeep Wrangler UnlimitedI may have a base plate kit for your 2013 Jeep Wrangler Unlimited but the Blue Ox Alpha Tow Bar part # BX7380 does not include a base plate kit. The tow bar is compatible with both Blue Ox and Roadmaster base plates though you would need an adapter in order to use a Blue Ox tow bar with a Roadmaster base plate kit. In order to recommend a base plate kit compatible with this tow bar, I would need to know what bumper you have on your Jeep. Once provided I would be glad to offer my recommendation...
view full answer... - Recommended Base Plate Kit and Other Parts to Flat Tow a 1997 Jeep Wrangler with Warn BumperTo flat tow your 1997 Jeep Wrangler you'll need a tow bar, wiring, and likely a high-low adapter. You'll also want to consult your owner's manual to make sure your vehicle is able to be flat towed without damaging it. Since you have the Warn bumper with the D-rings you can use Roadmaster D-Ring Bumper Mounts # RM-035-1 if they're 1 inch thick or # RM-035 if they're 3/4 inches thick. These will pair nicely with a Roadmaster tow bar like the Falcon 2 # RM-520. To power the Jeep's lights...
view full answer... - Recommended Flat Tow Set-up For 2008 Jeep JKU With Off-Road BumperFor your 2008 Jeep Wrangler Unlimited with off-road bumper you can use the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 3/4" Thick # RM-035 for your base plates. This is compatible with the Roadmaster Falcon All Terrain, Non-Binding Tow Bar - Motor Home Mount - 2" Hitch - 6,000 lbs # RM-522. For your tow bar wiring, I recommend the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267. This diode kit will allow you to use your factory wires...
view full answer... - Base Plates to Flat Tow a 2017 Jeep Wrangler Unlimited Rubicon Hard Rock with AEV Front BumperI checked with AEV and found that you can use the D-ring mounts on that bumper to flat tow the Jeep. If the D-ring mounts are 3/4 inches thick with 7/8 inch or 1 inch diameter holes you can use # RM-035 with a Roadmaster tow bar. If the D-ring mounts are 1 inch thick with 7/8 inch or 1 inch diameter holes you can use # RM-035-1. The tow bar would have to be an RV mount model such as the Falcon 2 # RM-520. The good news is that if the D-ring mounts are compatible with either of the adapters...
view full answer...
- Best Flat Towing Setup for a Jeep Wrangler Unlimited with D-Ring Bumper Mounts or OEM Rubicon BumperTo setup any vehicle for flat towing the basic parts that you need are a Base Plate Kit, Tow Bar, Safety Cables, Vehicle Tow Bar Wiring, a Supplemental Braking System, and most likely a High-Low Adapter. Since your 2014 Jeep Wrangler Unlimited has the 3/4 inch D-Ring bumper mounts you won't need a base plate kit. Instead you will need to use the Adapter for Jeep D-Ring Bumper Mounts # RM-035 with a Roadmaster Tow Bar. I recommend using the Roadmaster Falcon 2 Tow Bar # RM-520 as it is...
view full answer... - Parts Needed to Flat Tow a 2017 Jeep Wrangler with Aftermarket Bumper with 3/4" Shackles I tried finding information for your Dx8 bumper on your 2017 Jeep Wrangler, but was unable to locate much. You will want to ensure that the bumper is rated for flat tow use. As long as your bumper is rated for flat tow use, we do have an option for your 3/4" shackle holes. - Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars # RM-035 This will allow you to use the Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar # RM-676, which also includes the needed...
view full answer... - Recommended Jeep D-Ring Bumper Mounts for a Roadmaster 5250 Tow Bar Yes, there are a couple of adapters that will work with the Roadmaster Falcon 5250 tow bar and connect to the welded rings on your aftermarket bumper. For 1" rings you will want the Adapter for Jeep D-Ring Bumper Mounts item # RM-035-1. For 3/4" rings you will want the Adapter for Jeep D-Ring Bumper Mounts item # RM-035. You will want to confirm your bumper is rated to be flat towed with. I have listed some other parts you will need to flat tow your 2015 Jeep Wrangler Unlimited below. Tow...
view full answer... - Can Roadmaster Tow Bar Connect to Jeep Wrangler with D-Rings on Off Road BumperRoadmaster has D-Ring adapters for their base plate kits like with the # RM-035 for a 3/4 inch thick D-ring, part # RM65FR for a 1 inch D-ring adapter that is extended or the part # RM-035-1 for a 1 inch thick D-ring standard length. This would work great with any of their coupler mounted base plate kits like the # RM-520.
view full answer... - Base Plate Options For A 2022 Jeep Gladiator With A Barricade Alloy BumperHello David. Based on what I can see online the Barricade Alloy Bumper has welded D-rings. Provided this bumper is tow rated, I suggest using the Roadmaster D-ring adapters # RM-035 for 3/4" thick D-Rings or # RM-035-1 for 1" and use a Roadmaster Falcon All Terrain, Non-Binding Tow Bar, # RM-522. I do suggest that you contact the manufacturer of this bumper and verify that it is rated for flat towing. If the bumper is not tow rated, the Roadmaster Direct-Connect Base Plate Kit # RM77VR...
view full answer... - What Parts are Necessary to Flat tow a 2004 Jeep Wrangler Unlimited?There are going to be quite a few components necessary to flat tow your 2004 Jeep Wrangler, starting with the base plate kit. You will need to know the type of bumper you have in order to find the kit that will work for you. If your '04 Wrangler has a double tube bumper or u-channel bumper you would want Roadmaster EZ4 Base Plate Kit # RM-521424-4, though this will not fit models with front leaf springs. Should your Wrangler have an off-road bumper with 1" D-Ring bumper mounts you would...
view full answer... - Cost-Effective Flat Towing Setup for 2009 Jeep Wrangler JK with 7/8 inch D-RingsWe do have some flat towing equipment for you to get your 2009 Jeep Wrangler to Jeep events and while there are cost effective options, flat towing equipment in general can get a bit pricey so you'll need to keep that in mind. With that being said, I have narrowed down the options for you to some cost-effective products. Since you have the D-Rings on your bumper I recommend using the Roadmaster D-Ring Adapters # RM-035 for 3/4" thick D-Rings or # RM-035-1 for 1" thick D-Rings. Both of...
view full answer... - Parts Needed To Flat Tow A 1999 Toyota 4Runner SR5Sounds like you are putting together a fun vehicle. I recommend checking the GVW of your SupperTruss hitch to make sure it is capable of handling the weight of the 4Runner. If it is capable of towing your 1999 Toyota 4Runner I recommend the following items: Item # 1148-3 is a simple bolt on base plate that can be removed when your new bumper is added. This base plate works with 2wd and 4wd models. The cross bar brackets can be removed when not in use. Item # RM-576 is the Sterling all...
view full answer...
Do you have a question about this Tow Bar Base Plate?
Used Items Available
Condition: Surface Scratches
Notes: Item has minor cosmetic chips and scratches. Otherwise new and unused.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Jeff D
Installed by:
Cole B
Video by:
Joshua S
Video Edited:
Jacob T
Video Edited:
Chris R
Written by:
Laura H
Updated by:
Shelly K
Updated by:
Wilson B
Updated by:
Jenny M
Updated by:
Hannah L
Updated by:
Isabelle B
Test Fit:
Ryan G
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Joel P.
8/17/2018
Still very satisfied with these adapters. About to purchase a new tow bar and will switch them to the new bar.