etrailer Ball Mount w/ Pre-Torqued 2" Ball - 2" Hitch - 2" Drop - 7,500 lbs

Video Transcript for Review of etrailer Pre Torqued Ball Mount - e67DR

Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at this etrailer pre-torqued ball mount with the two-inch diameter ball fits a two-inch hitch receiver, and this has a two inch drop or a 3/4 inch rise. Offers a 7,500 pound gross towing weight capacity. Now, this heavy duty ball mount will provide everything you need to embark on your towing journey with confidence. The ball mount itself will let you hook up your trailer to your tow vehicle. The shank right here is what'll slide into your two-inch hitch receiver.

Now if you notice, they do include the 5/8 inch size pin and clip, and that's designed to fit tightly in the hitch pinhole to minimize rattle when you attach it to your hitch receiver. This ball mount will offer a two inch drop like it is here, or if you slip it over a 3/4 inch rise. And those drop and rise is measured from the top of the shank to the top of the ball platform. So basically right now in the drop position, if we put a ruler on it, you'll be able to see there's your two inch drop. If you flip it over into the rise, top to top, you can see here's the 3/4 inch rise.

Now, this two-inch inch ball you can see, this will provide the connection point for your trailer's coupler. This ball is pre-torqued to the factory specs in the drop position. Now, if you do wanna use this in the rise position, we do also sell this same ball mount with the ball torqued in the rise position. And that's part number E27DR. Now, this is a sturdy steel, has rust-resistant finishes.

Basically the ball mount itself is a matte black powder coat over an e-coat on the ball mount. And if you look at the ball, it's a real nice finish. It's a black nickel-plated hitch ball and they also include the hitch pin and clip and they're matching black nickel finish on both of those also. Again, the application, this fits a two inch by two inch trailer hitch receiver, gross towing weight capacity is 7,500 pounds and the tongue weight capacity is 750 pounds. Again, ball diameter, which is stamped on the top, two inch diameter.

Last thing I'm gonna give you on this is the ball mount length, and the length of a ball mount is always measured from the center of the hitch pinhole to the center of the ball. So if we get a ruler and we go center to the center of the ball, you'll be able to see it's right at eight inches. But that should do it for the review on this etrailer pre-torqued ball mount with the two-inch ball for the two-inch hitch receiver.