Tekonsha Brake Controller Wiring Harness For 2024 Chevy Silverado 1500

Question

Question:

Hi, Im looking for a Tekonsha Prodigy harness to fit my 2024 Silverado 1500. Everyone that comes up, when I open it says it wont fit. Help!

asked by: Ron F

0

Expert Reply:

Hi there Ron; the correct Tekonsha brake controller wiring harness for your 2024 Chevy Silverado 1500 is the following:

- Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers # 3064-P

expert reply by: Kyle S

0

Ron

3/18/2024

Thanks

Reply

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Hey Dustin, thanks for reaching out! I will recommend SumoSprings over Timbrens all day everyday because they are much more forgiving when the vehicle is unloaded. We've actually joked around here about how the Timbren kits will either give you…

view full answer...

Answer 4

A 2023 Chevy Silverado 1500 will need to have 4WD and a two-speed transfer case, which will need to be placed in neutral, in order to safely flat tow. Your owner's manual will have a list of instructions to follow to switch your transfer case…

view full answer...

Answer 5

I recommend the Redarc Tow-Pro Elite Brake Controller for Tekonsha Harness item #RED63RR. This brake controller and harness will install inside your Silverado without cutting or splicing wires using the Tekonsha Plug-In Wiring Adapter item #3064-P.…

view full answer...

Answer 6

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 7

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 8

You're right, the mounting bracket is unique (in a good way) for the Curt TriFlex NEXT Trailer Brake Controller #C24VV. The bracket is smaller and all you do is put the included adhesive tape on the bracket and stick it wherever you like under…

view full answer...

Answer 9

We can get your 2024 Chevy Silverado 1500 4x4 set up with a complete system for flat towing, and I'll go ahead and list out all the parts you need to make it easy to order: - Base Plate Kit: Roadmaster Direct-Connect Base Plate Kit #RM86MR - Tow…

view full answer...

Answer 10

Mixing and matching the brackets and air springs isn't really recommended but you might be able to get a combination to work. If I were you I would just put the complete #AL88288 kit on since that would fit properly and there wouldn't be any…

view full answer...

Answer 11

You do have the option to utilize the air brakes on your 2023 Freightliner Cascadia to control electric trailer brakes using the Hayes Air Actuated Trailer Brake Controller, part #HA100400C. However, we mostly recommend just using an electric brake…

view full answer...

Answer 12

The first thing you will need for your 1999 D250 is a 4-way. The Curt T-Connector Vehicle Wiring Harness #C55317 plugs into the connection points behind your rear bumper and will allow you to power your trailer's signal lights. Once the 4-way is…

view full answer...

Tekonsha Brake Controller Wiring Harness For 2024 Chevy Silverado 1500

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching