Lippert Replacement Window Frame with Seal for RV Entry Doors - Exterior - White
(74 reviews)
Price: $53.73
In Stock
Lippert Replacement Window Frame with Seal for RV Entry Doors - Exterior - White
Item # LC363369
Our Price: $53.73
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (74)
- Q & A (0)
- Videos (1)
- Photos
Lippert RV Door Parts - LC363369
- Entry Door
- Window Parts
- White
- Frame
- Lippert
- Protect the interior of your RV from the elements with a replacement Inner and Outer Entry Door Window Frame with Seal. This frame is made of durable plastic and comes in black to match the LCI RV Radius Door. Easy to install with no assembly required, the replacement frame and seal enhances the look and security of your Radius Entry Door.
- For use on LCI Radius RV Entry Doors
- White plastic extrusion
- Easy to install - no assembly required
- Installation hardware not included
- Overall dimensions: 15-3/4" wide x 25" tall
- Glass dimensions: 12" wide x 21" tall
- Made in the USA
- 1-Year limited warranty
363369 Lippert Components Replacement Window Frame with Seal for RV Entry Doors - Exterior - White
Video of Lippert Replacement Window Frame with Seal for RV Entry Doors - Exterior - White
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Lippert Components RV Entry Door Window Frame Review
Today we'll be taken a look at the Lippert Components 12 inch by 21 inch, inner and outer entry door window frame with seal in black. Part number LC363370. It's also available in white. Part number LC363369. The Lippert indoor outdoor window frame is the perfect replacement for your RV or camper's old worn out window frame. It measures 21 inches by 12 inches here on the inside and it's gonna fit your LCI radius RV doors. It's made out of a black extruded plastic, it's easy to install and there's no assembly required.
The glass is not included. Now that we know all the features lets go ahead and show you how to get it installed. As you can see my old one is faded. It's like a faded yellow color and I'd like to replace it. Let's go ahead and open up our camper door. Undo our screen.
Then we've got our window here with our screws. We'll just go ahead and take the first screw out. We're just gonna work our way around. Once we get them all out. We just kind of easily take off the frame.
You want to be sure and not break the window behind it. We can set that aside for now. Now to get the front portion of the frame off we can go ahead and bring our door around. Now its got some adhesive on this so it's kind of stuck on the door. We're gonna grab a plastic tool and try and work that around and pry it off. Now you can use a screwdriver, just be careful not to scratch the door.
Get underneath the end and just kinda pry it off and work your way around. Once one side gives way it should be fairly easy just to work your way around and get the rest of it off. There we go. Now before we replace our new window frame I'm going to go ahead and get some of this adhesive off here. I'm going to take my same scraping tool, or my plastic tool and work my way around and get some of that off there. Now with our door all cleaned off, let's go ahead and grab our new black window frame. The one with the sealant on it. Now it's a self sealing adhesive so we just need to press it firmly in place. Once we get the screws in place it's gonna pull it in nice and tight. Now with it in place we can open the door up. I'm going to get an extra set of hands. I'm going to have somebody come in and hold the frame in place while I place the glass in place. What you want to do is you want to make sure the textured side, if you do have a textured side that it's facing us. That way we can get a good grip on our seal. We're gonna set it in place. We've got some tabs sticking out here of where the glass should be. As you can see there's sealant for the glass too. The glass is just gonna rest up against it. It's held in place with these tabs along the frame. Then I'm gonna grab the other portion of my frame and set that in place. Now I'm just gonna go ahead and start a few screws in that way my buddy on the other side can let go. Now with the door open all the way we can go ahead and run the rest of our hardware through. Now with our hardware in place let's go and check it out. I'd say we got a pretty good seal. That's gonna complete our look at the Lippert Components 12 inch by 21 inch inner and outer entry door window frame with seal in black. Part number L3C63370.
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Lippert Replacement Window Frame with Seal for RV Entry Doors - Exterior - White - LC363369
Average Customer Rating: 4.4 out of 5 stars (74 Customer Reviews)
by: Doug 09/14/2023
I received my window and faucet a day early. So I installed them day early! Pretty straight forward. The faucet was plug and play. The window requires three hands. One thing of concern is the window is not secured by screws. Where I go, the roads in and out are bad, or worse. Baja tends to level the playing field. I would have preferred a window that is help in by mechanical fasteners. But time will tell. I did use some extra sealant and will hope for the best.
by: Rick 03/24/2017
Excellent experience excellent price product was delivered fast and as advertised. I will be looking first to etrailer for any of my future rv
restoration needs. Rick
by: Steve09/17/2023
It was packaged very well and was delivered in just a fe
by: P05/30/2018
Looks okay. Not installed yet but the advertising photos aren’t accurate. It snaps together and isn’t screwed together as dipicted in the photos and in the installation video. I wanted the screw together version as it seems more secure but that not what I received
by: Robert 02/11/2023
The window and the frame were a perfect fit !
by: Tom P12/20/2017
Excellent product, but do have a suggestion:
I would include the screws for the window frame installation.
by: camper joe04/07/2017
window frame fit like a glove !!
by: Mark K08/15/2015
Picture shows something like a window but there is NO WINDOW just a FRAME, just like the description says.
by: Chris 06/05/2020
Just as described and easy to follow your package with real time updates. Thanks!
by: Sharon09/01/2020
Product was exactly what I needed
by: Roman02/27/2024
by: Sara 02/13/2021
by: David 04/14/2021
by: David 04/30/2024
have used Etrailer a few times here in my Bodyshop. They are great in getting your parts to you in a quick manner which is rare these days. My new to go online store for our RV needs.
by: Tim12/09/2022
I'm happy I bought this unit. It fit my 1990 Fleetwood Jamboree perfectly. The original unit was literally falling apart and this new unit installed easily. I gave it four stars because I'm not impressed with the plastic ratchet post/slot assembly. It closed with a lot of pressure and remained tight, which is great. However, it's plastic. While it's great for now, I would have preferred screws, which will last the next decade or two. Having no confidence in the long term viability of plastic, I used caulking in the post/slots to "glue" them together, and installed both the interior and exterior sections with caulking, hoping the caulking does the long term job of keeping the unit in place, even after the plastic has become brittle. I'll update you in 10 years - hahaha.
For now, I love the unit and would recommend it to anyone with my caveat about the plastic parts rather than screws.
by: David 02/13/2024
I feel it would be a better product if it was screwed together rayher than clipped.
by: Ronald 09/21/2023
I like the product, and it was easy to install. The delivery was fast within the week that I ordered it. I would have given it 5 stars if I had a choice of white on the inside and black on the outer door like the one, I replaced.
by: Fred05/20/2018
everything i have ordered from etrailer has come right away and works great very goog customer service
by: John 04/24/2023
I can always find my part at Etrailer and it arrives just how it's described. Customer support online is very responsive too. Thanks all!
by: Jeff 04/24/2023
Window was delivered timely and fit perfectly. Very easy installation. Thanks Christy!
by: Mike G.08/26/2016
Window frame fit my trailer perfectly with no modifications required. The pre-caulking helped to expedite installation.
by: Roger 11/30/2021
Installation was very simple and actually worked. The frame utilizes ratchet type plastic prongs instead of screws. Whether it actually works long term is yet to be seen. Once installed, it will be very difficult to remove without breaking the tabs. Hope it lasts a long time. The window fit precisely in the existing cutout. Push in then caulk the outside against the door surface.
by: Dennis 07/13/2023
Came in perfect
by: Tate11/19/2016
The only thing I purchased from etrailer that I wish I hadn't. There were no instructions and I didn't find any until now that I'm writing the review. I was installing this into a door that didn't have a windo previously. Trying to figure out how large to cut the opening proved far more difficult than one would think. Once I got the hole to the correct size I found that the frame was wider than the door. This was because there was no frame built into the door. I ended up building a frame to make this work. I thought it might take a couple of hours to install instead it took closer to 8 hours.
25
74
Show More Reviews
See what our Experts say about this Lippert RV Door Parts
- Is There a White Version of the Lippert Thin ShadeI may have a solution for you, but there is not a white version of the Lippert Thin Shade # LC806621. You could use the Lippert Replacement Window Frame with Seal for RV Entry Doors - Exterior - White # LC363369 and then add a shade of your own liking to the interior. This would be the best solution available for you until Lippert makes one of the Thin Shade kits in white.
view full answer... - Door Thickness for Lippert Inner and Outer Window FrameI checked with Lippert and the window frame, parts # LC363370 in black and # LC363369 in white, fit a door that's 1-1/2 inches.
view full answer... - Travel Trailer Frame Assembly and GlassIf it isn't held in with screws there should be some type of adhesive on it; I wish there was an easy way for me to tell you exactly how but realistically there isn't going to be a way that is particularly easy for you to remove your assembly if it is stuck on with adhesive. The Lippert Components 12" x 21" Inner and Outer Entry Door Window Frame with Seal # LC363369 just snaps together so it is possible you may be able to unsnap your assembly as well.
view full answer... - Do 15-3/4 x 25 Replacement Entry Door Window Frame Assemblies Have Frosted GlassThere are 15-3/4" by 25" RV window door frames with glass, but they do each come with frosted glass, the Valterra Entry Door Window Frame Assembly - Black # A77051, and Lippert Components Replacement Window Frame with Seal for RV Entry Doors - White # LC363369 or Black # LC363370. The only option we offer are window frames of that size which would require you to purchase the glass separately for the 12" x 21" window, though you'd need to source that locally as that glass is not something...
view full answer... - Replacement Entry Door Window Glass and Frame for 2004 Keystone Tail-Gator 5th WheelFor a white frame and a 12x21 piece of glass for the door on your RV, you'll want part # LC363369 from Lippert.
view full answer... - Removal of Travel Trailer Door Window to Replace with Lippert Entry Door Window for RVAll of our window trim kits have screws. It is likely your window has uses an adhesive to secure your window in place since you don't see any screws. I recommend using the Performance Tool Pry Tool Set # PT73HJ to give you soft and hard nylon prying options so you don't scratch your door surface. I've have someone help secure the window from the opposite side so you don't drop it when the frame comes loose. Then you can use the Lippert Components Replacement Window Frame with Seal...
view full answer... - Is the Lippert Replacement Window Frame with Seal for RV Entry Doors Compatible with the Thin ShadeThe Lippert Thin Shade you mentioned # LC786037 is designed for 15" x 24" windows and the Lippert # LC363369 is a 12" x 21" window. Unfortunately there is not going to be a way for you to make this work without either using the black Thin Shade Complete Window Kit # LC806621, or using the # LC363369 and sourcing your own small venetian blind to cover the 12" x 21" window in that kit. Lippert currently does not make the Thin Shade kits in anything other than black.
view full answer... - Complete Replacement Entry Door Window Kit For MotorhomeFor a complete replacement kit, we have a couple options. - Lippert Replacement Window Frame with Seal for RV Entry Doors # LC363370 (black) - Lippert Replacement Window Frame with Seal for RV Entry Doors # LC363369 (white) These replacement windows have overall dimensions of 15-3/4" wide x 25" tall. We do not have anything that tells us the dimensions of your current windows. If this size does not fit what you need, please let me know what size you are needing and I would be happy to...
view full answer... - Replacement Entry Door WindowWe do not have an exact match for you. The closest item we have is the Lippert # LC363369 replacement window in white. It is 15-3/4" wide X 25" tall so you would have to enlarge the rough opening a bit.
view full answer... - Removing Entry Door Window Frame that Doesnt Have ScrewsWhile the Lippert Components Replacement Window Frame with Seal for RV Entry Doors # LC363369 uses screws to attach the two pieces of the frame when installed not all of the frames like this use this method. Your sounds like it's two pieces that just pop together. You'd have to pry the inside frame off with a pry tool similar to the # PT73HJ.
view full answer... - Does Lippert Inner and Outer Entry Door Window Frame Part # LC363369 Include Installation HardwareMy contact at Lippert Components advised that their Inner and Outer Entry Door Window Frame Part # LC363369 does not include installation hardware. This item snaps together for installation and it includes a seal.
view full answer... - What is the Inside Frame Measurement on Lippert Inner and Outer Entry Door Window Frame with SealThe Lippert entry door window frame with seal # LC363369 measure 12 x 21 inches on the inside. The overall dimensions are 15-3/4 x 25 inches. I included a picture showing the measurements. The picture is on the black version but its the same for the white one.
view full answer...
- Replacement RV Entry Door Window with SealWe do not have a window that fits your measurements perfectly, but we do have an option that is close. The Lippert Replacement Window Frame with Seal for RV Entry Doors # LC363370 (black) and # LC363369 (white) includes the frame, glass and seal like you are looking for. It has measurements of 15-3/4" wide x 25" tall, which is the closest we have to your 15" x 24".
view full answer...
- Best Sealant Tape to Use When Installing Lippert Trailer Entry DoorI checked with Lippert about what they recommend when installing an entry door. They state that you will need to use Butyl Tape or closed cell PVC foam tape. For a laminate wall: 1" wide, maximum 1/8" thickness. For a stick and tin wall: 1" wide, 1/4" maximum thickness.
view full answer...
Do you have a question about this RV Door Part?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Dustin K
Written by:
Chelsea B
Updated by:
Wilson B
Updated by:
Halie H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Heather A.
5/31/2018
This frame is a snap together frame and does not require hardware. If you are looking for a screw in frame I recommend part # A77010. The mounting screws are part # A77046.
Helpful Links
RV-Doors/Valterra/A77010.html
RV-Doors/Valterra/A77046.html