Solera Classic Universal Arms for Manual Pull-Style RV Awnings - 68" to 81" Long - White
(7 reviews)
Price: $639.08
Solera Classic Universal Arms for Manual Pull-Style RV Awnings - 68" to 81" Long - White
Item # LC434718
Retail:$869.95
Our Price: $639.08
You Save: $230.87
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (7)
- Q & A (0)
- Photos
Lippert Accessories and Parts - LC434718
- RV Awnings
- Arms
- Pull-Style Support Arms
- Flat Awnings
- Pitched Awnings
- Lippert
- 68 - 81 Inch Long
- White
- Standard Head
- Carefree Replacement
- Dometic Replacement
- Solera Replacement
Replace the support arms of your manual pull-style RV awning. Easily detach arms and swing into carport position, and adjust pitch to keep your RV patio in the shade all day.
Features:
- Replaces the support arms on your manual, spring-loaded RV awning
- Blocks sun at any time of the day with varied pitch options
- Arms detach from bottom bracket and easily swing into carport position
- Includes installation hardware and replacement pull rod
- Butyl tape (sold separately) is recommended to seal brackets
- Quantity: 2 support arms
- White color
Specs:
- Application: Dometic, Carefree, and Solera manual pull-style awnings
- Dometic models: 8500, 9000, 9100, Sunchaser, and Weather Pro
- Carefree models: Spirit, Fiesta, Simplicity, Traveler, and Eclipse
- Arm length: 68" to 81"
434718 Replacement Lippert Solera Universal Awning Hardware - Solera Classic Support Arms for Manual Retractable Awnings - 68" to 81" - White
Installation Details
Alternate Instructions
Customer Satisfaction Score:
87% were satisfied with this product
13% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
Customer Reviews
Solera Classic Universal Arms for Manual Pull-Style RV Awnings - 68" to 81" Long - White - LC434718
Average Customer Rating: 4.0 out of 5 stars (7 Customer Reviews)
Replace the support arms of your manual pull-style RV awning. Easily detach arms and swing into carport position, and adjust pitch to keep your RV patio in the shade all day.by: Sanford09/04/2022
After assembly which took me some hours. Toward the end, after putting tension on the springs and placing the end caps on the brackets, I found that the holes in the end caps did not match up with the threads on the brackets. I had to redrill the holes in the end caps to get the screws to go in. Then I discovered that the upper brackets were put in on the opposite side and therefore would not lock in place. Trying to remove the screws that hold the brackets to switch them to the right side, one of the screw heads simply fell off, and the screw was then unable to be removed.
by: Lois 08/01/2022
Our springs arrived today. So now we have the complete replacement for our awning. Looking forward to getting it installed so we can use the awning again. Glad that etrailer had the parts to make this happpen.
by: Kyle04/20/2022
Arrived in great condition
by: Gary 05/25/2023
by: Bob05/18/2023
by: David12/07/2022
by: Brian 11/22/2021
7
7
See what our Experts say about this Lippert Accessories and Parts
- Can Longer Awning Arms Replace Original Arms That Are Shorter?When deciding if it's best to go with a larger arm for your awning, you'll need to go by the actual awning/fabric extension instead of arm length. As long as that's good, you can use larger awning arm kits like the: -Solera Classic Universal Awning Support Arms for RVs # LC434718 for white, Or, -The Solera Classic Universal Awning Support Arms for RVs # LC434717 for black. However, if your awning when extended out measures less than 116", then the Solera 12V Power RV Awning Conversion...
view full answer... - How To Convert Dometic Power Awning to Manual In order to convert a Dometic power awning to manual you would need a new set of arms, the Solera Classic Universal Awning Support Arms for RVs part # LC434718 will work well for this. All you would need to do is remove the old roll tube and fabric from the awning you have now and install it on the above once mounted on the trailer. If you prefer black we have this as well as part # LC434717. In regards to mounting the new arms, you may need to drill a few new holes but this is unavoidable...
view full answer... - Replacement Fabric And Roller Tube Option For A Dometic 9200 18 Foot AwningI took a look at what we have for your Dometic 9200 18' awning, and in order to replace your fabric and roller bar, you're also going to need to replace the arms with something like the: -Solera Classic Universal Awning Support Arms for RVs # LC434718, as your Dometic arms are not going to be compatible with Lippert's roller tubes # LC260560405. For fabric, you can use the Solera 18' Replacement Awning Fabric # LCV000334419. This is a solid black color, and will work great with an 18'...
view full answer... - Replacing Support Arm for Dometic Awning Based on my research the 3310766.113P part number you mentioned is for a Dometic awning replacement arm assembly, which you are correct is no longer available. What we do have though is the Solera Classic Universal Awning Support Arms # LC434720 for 81 to 96 inch arms or # LC434718 for 68 to 81 inch arms. These universal support arms are designed to replace existing arms that are used for a Dometic awning. You can use the kit to replace both arms on your existing system.
view full answer... - Manual Awning Support Arms in White For Solera Awning Roller AssemblyWe do have manual support arms available in white for a Solera awning roller assembly like your Solera RV Awning Roller Assembly - 16' Wide - Black Fade # LCV000211486. In order to choose the right one, what you want to do is measure how much space you have from your awning rail straight down, and you will want to choose the length based on that, from the following options: - 63 to 68 Inches: Solera Classic Universal Awning Support Arms for RVs # LC434716 - 68 to 81 Inches: Solera Classic...
view full answer... - Replacement Support Arms for Dometic Spring-Loaded Manual AwningIf you have a Dometic spring-loaded manual awning on your 2015 Coachman Catalina 213BH we do have replacement awning support arms which will work; you simply need to choose the correct length and color from the following: - Solera Classic Universal Awning Support Arms for RVs - 68" to 81" Arms - White # LC434718 - Solera Classic Universal Awning Support Arms for RVs - 81" to 96" Arms - White # LC434720 Or - Solera Classic Universal Awning Support Arms for RVs - 68" to 81" Arms - Black...
view full answer...
- Will A Solera Awning Head Work With Carefree Awning ArmsI do have an option for you but you can't use a Solera Awning Head with Carefree Awning Arms. The arms and head must both match but you can use a Solera Awning Head/Arms with a Carefree Awning Roller Tube/Fabric. For this, the Solera Classic Universal Awning Support Arms part # LC434716 (63"-68" Long Arms), part # LC434718 (68"-81" Long Arms), or part # LC434720 (81"-96" Long Arms) will be a direct replacement. I really wish it was just as easy as replacing the head but you will need...
view full answer... - Replacement Arms for Solera AwningYour photo didn't come through, but you can use the Solera Classic Universal Awning Support Arms for RVs - 68" to 81" Arms - White # LC434718 or # LC434717 in Black. This will replace your awning arms and give you a great replacement. I assume you don't have the really long arms, but if you have arms longer than 81 inches you can use the Solera Classic Universal Awning Support Arms for RVs - 81" to 96" Arms - Black # LC434719 or # LC434720 In White.
view full answer... - Solution for Replacement Arm for Dometic Awning.I do have a solution, but we do not offer a left arm for your Dometic awning. What we do have is the Solera Classic Universal Awning Support Arms # LC434720 for 81" - 96" arms, or # LC434718 for 68" - 81" arms. These universal support arms are designed to replace the existing arms on Dometic awnings. You can use the kit to replace both arms on your Dometic awning system.
view full answer... - Is 68 to 81 Inches the Range of Arms That Solera Classic Universal Awning Support Arms ReplaceThe arm length of 68 inches to 81 inches is the range that the Solera Classic Universal Awning Support Arms will replace. So if you have a spring-loaded manual awning with arms that are between 68 inches and 81 inches long, you can use these support arms as replacements. They come in either black or white. - Black: Solera Classic Universal Awning Support Arms for RVs - 68" to 81" Arms # LC434717 - White: Solera Classic Universal Awning Support Arms for RVs - 68" to 81" Arms # LC434718
view full answer... - Replacement for Dometic Manual Awning Arm The best option we have to replace an old Dometic awning arm is with the Solera Classic Universal Awning Support Arms part # LC434716 for 63"-68" or part # LC434718 for 68"-81". This is a universal kit that will allow you to keep your old fabric and roller all while upgrading to a new set of manual arms.
view full answer... - Parts Needed to Replace Carefree Awning Arms with Solera Awning ArmsIn order to replace your Carefree awning arms with Solera arms, you would just need to get the appropriately sized replacement arms compatible to replace a Carefree awning. I have listed these by size below. - Solera Classic Universal Awning Support Arms for RVs - 63" to 68" Arms # LC434716 (white) - Solera Classic Universal Awning Support Arms for RVs - 63" to 68" Arms # LC434715 (black) - Solera Classic Universal Awning Support Arms for RVs - 68" to 81" Arms # LC434718 (white) - Solera...
view full answer... - How to Determine the Correct Replacement Awning Arms for a Dometic Sunchaser 8300 AwningThe correct replacement option depends on the length of the arms that you are replacing. The arm length of 68 inches to 81 inches is the range that the Solera Classic Universal Awning Support Arms will replace. So if you have a spring-loaded manual awning with arms that are between 68 inches and 81 inches long, you can use the Solera Classic Universal Awning Support Arms # LC434718. If you have a spring-loaded manual awning with arms that are between 81" to 96" then you would want to use...
view full answer... - Is Replacement Cast Piece With Rivet Available for Lippert Classic AwningThe only parts that are replaceable for the Solera Classic Awnings are the gas struts and the support arms per my contact at Lippert. If you need something other than either of those parts then you'll need to replace the entire awning arm. Attached are links to our selections of replacement arms and struts for you to check out. If you'll be swapping out the arms make sure you choose replacements that are the same length as your current awning arms.
view full answer... - Replacement Awning Arms For Dometic Manual Operating Awing The Solera Classic Universal Awning Support Arms # LC434720 is designed to replace the arms and springs on your manual Dometic awning. You must have between 81"-96" in height between the top awning rail and where the bottom bracket mounts on the camper. If you have less than the 81" you want to look at the Solera Classic Universal Awning Support Arms # LC434718. These are for a height of 68-81" tall from the top awning rail to the bottom bracket mount. I recommend upgrading to a power...
view full answer... - Availability of 19 Foot Long RV AwningIn the 19 foot length awning option we have only a powered awning with the Solera 12V XL Power Awning part # LCV000335007-362241 which has a fade from white to black. We don't have an option that is solid white.
view full answer... - Replacement Arm Kit for Dometic RV AwningTo replace the Dometic awning support arms on your RV we have the Solera kit part # LC434718 that you referenced which will work great. This comes with everything you'd need as well. We do not have just the Dometic part numbers you mentioned though.
view full answer... - What Does the Solera Classic Universal Awning Support Arms Come WithThe Solera Classic Universal Awning Support Arms part # LC434718 come with everything shown in the photos on our product page including support arms, torsion springs, and hardware. The only thing that would be needed for a complete awning is the roller tube and fabric.
view full answer... - Dometic Awning Replacement Arm SolutionsWe have universal support arms for awnings that do fit the Dometic awnings like what you have. For example, we have the part # LC434720 for arms that are between 81 and 96 inches, part # LC434718 which can be between 68 and 81 inches in length, and part # LC434718 which are for replacements between 63 and 68 inches in length. You'll want to measure the length of what you have now and then pick the correct replacements. The mounting hardware comes with the sets as well.
view full answer... - Replacement Awning Arms for Dometic AwningFor Lippert awning arms that will work with your manual Dometic awning we have the Solera Classic Universal Awning Support Arms for RVs # LC434718. These will work for you if you have 68"-81" of height between the top awning rail and the bottom of the bracket. We also have the Solera Classic Universal Awning Support Arms for RVs # LC434718. These are designed to replace support arms that measure 81"-96". If you have an arm length of 63"-68" then the arms you would need are the # LC434716.
view full answer... - Replacement Arms for Dometic Power Awning For your Dometic awning we have the Solera Classic Universal Awning Support Arms in White # LC434718 or Black # LC434717 that should work great as replacements. These are designed for Dometic systems like yours and they do not include a motor. I do just recommend measuring the length of your existing arms to make sure they match. These units measure 68 to 81 inches long.
view full answer... - Is Distance Range of Solera Awning part # LC434718 When Extended or StoredThe Solera Awning part # LC434718 that you referenced has varying lengths between 68 and 81 inches which allows for varying pitch options which is when the awning is open. I don't see how this would cause you to lose ground clearance.
view full answer... - Finding Replacement Support Arms For An Awning On A 2006 Keystone Everest 364QFor your 2006 Keystone Everest 364Q, with a 20' awning, you can use the: -Solera Classic Universal Awning Support Arms for RVs - 68" to 81" Arms - White # LC434718, -Solera Classic Universal Awning Support Arms for RVs - 81" to 96" Arms - White # LC434720, Or The -Solera Classic Universal Awning Support Arms for RVs - 68" to 81" Arms - Black # LC434717, -Solera Classic Universal Awning Support Arms for RVs - 81" to 96" Arms - -Black # LC434719. You'll just need to measure the length...
view full answer... - Bottom Bracket Compatibility of the Solera Classic Universal Awning Support ArmsLooking at the bottom foot of the Solera Classic Universal Awning Support Arms item # LC434718, I can say the mounting pattern is different but the latch looks identical. You may not even have to remove the bottom foot. I am not sure I have ever seen a stand off spacer on a Dometic Awning but would love to take a look at it if you would like to email me back a picture.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Written by:
Kristina F
Updated by:
Mike S
Updated by:
Amanda K
Installed by:
Michael B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
9/21/2022
I can understand your frustration with the installation. I will have our customer service team reach out to you.