Replacement Awning Arms for Dometic Awning

Question

Question:

Is lippert awning brace interchangeable with dometic awning?

asked by: Michael W

1

Helpful Expert Reply:

For Lippert awning arms that will work with your manual Dometic awning we have the Solera Classic Universal Awning Support Arms for RVs # LC434718. These will work for you if you have 68"-81" of height between the top awning rail and the bottom of the bracket.

We also have the Solera Classic Universal Awning Support Arms for RVs # LC434718. These are designed to replace support arms that measure 81"-96". If you have an arm length of 63"-68" then the arms you would need are the # LC434716.

expert reply by: Robin H

1

Answer 1

The Solera Classic Universal Awning Support Arms #LC434720 is designed to replace the arms and springs on your manual Dometic awning. You must have between 81"-96" in height between the top awning rail and where the bottom bracket…

view full answer...

Answer 2

Based on my research the 3310766.113P part number you mentioned is for a Dometic awning replacement arm assembly, which you are correct is no longer available. What we do have though is the Solera Classic Universal Awning Support Arms #LC434720 for…

view full answer...

Answer 3

When winding an awning you want to wind in the direction that would allow the spring tension to want to pull the awning fabric in. So depending on how you look at the head it could be clockwise or counter-clockwise. So roll the awning like you are…

view full answer...

Answer 4

When installing an awning like the Solera Smart Arm 12V Power RV Awning #LC517486, the arms will be secured to the wall framing. When the awning extends there will be quite a bit of leverage, so it is important to mount the awning to an area where…

view full answer...

Answer 5

Solera unfortunately only makes their arms compatible with a Dometic models and does not make their roller tube and springs compatible so you'd either have to reach out to Dometic for a replacement or completely replace your awning with one like…

view full answer...

Answer 6

Lippert's roller tubes are not a universal fit so they have not been confirmed to fit on a Dometic awning. I recommend upgrading to a Lippert awning like the Solera Smart Arm 12V Power RV Awning - 18' Wide - Programmable - White Fade…

view full answer...

Answer 7

To replace the Dometic awning support arms on your RV we have the Solera kit part #LC434718 that you referenced which will work great. This comes with everything you'd need as well. We do not have just the Dometic part numbers you mentioned…

view full answer...

Answer 8

The 15,000 Btu Furrion Chill HE AC like the part #FR23PV does indeed have a start capacitor. In regard to the starting power needed, I reached out to Furrion, who told me the 15,000 Btu Chill AC's require 30 amps and 2,500 starting watts. So that…

view full answer...

Answer 9

Please see the attached images for wiring diagram and installation instructions for the Furrion Chill Replacement RV Air Conditioner for Furrion Setup, #FR86PR.

view full answer...

Answer 10

I checked with SoftStart and they have a diagram for the install of their #SSR54FR on Furrion Chill RV AC units like the #FR58PR that you referenced.

view full answer...

Answer 11

I was able to reach out to my contact at Lippert and they tell me that the Solera Rollbar Only for 18' Black Awning, Black Tube #LC260560405 is 208" long and 3-1/2" in diameter.

view full answer...

Replacement Awning Arms for Dometic Awning

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching