Replacement Support Arms for Dometic Spring-Loaded Manual Awning  

I do have a solution, but we do not offer a left arm for your Dometic awning. What we do have is the Solera Classic Universal Awning Support Arms #LC434720 for 81" - 96" arms, or #LC434718 for 68" - 81" arms. These universal…

Though we do not sell just one arm by itself The Solera Classic Universal Awning Support Arms for RVs - 81 inch to 96 inch Arms - White #LC434720 comes with the whole kit. This kit is designed to replace the existing support arms on your Dometic,…

Sorry to hear about your awning mishap but we can help you with a set of new awning arms you can use with your existing setup on your 2017 Keystone Bullet. Please refer to the linked page that displays replacement awning arms. We have kits for flat,…

For your 81-1/2 inch measurement you can replace the support arms on your Dometic spring-loaded manual awning with the Solera Classic Universal Awning Support Arms for RVs - 81" to 96" Arms #LC434720 (White) or #LC434719 (Black).

To order the correct Solera replacement arm size, simply measure the length of the wall-mount extrusion from top to bottom. I've pointed this out using the photo you sent in as an example. Short styles will measure 61-1/2" and use part…

Yes the Solera Classic Universal Awning Support Arms for RVs #LC434717 can replace your Dometic awning arms and will work great with your current roller.

I do have an option for you but you can't use a Solera Awning Head with Carefree Awning Arms. The arms and head must both match but you can use a Solera Awning Head/Arms with a Carefree Awning Roller Tube/Fabric. For this, the Solera Classic…

The awning arms are measured from top to bottom of the wall mount. This can then be used to select the correct length replacement. I have attached a photo below to assist. You will also need to pay attention to the style of arms such as pitched or…

Thanks for the picture of your awning when it is retracted. Based on that yours is retracted enough to be totally safe.

Thank you for the photo; the individual rails are not available separately so you will need to get the Support Arm Assembly such as #LC281154 to replace your bent rail. This assembly has 69" support arms and is to be used with standard awning…

When choosing the slider you want to measure the outside front of box width including the flange. Then you need to select a slider that extends a minimum of 2-1/2 inches beyond each side of the box width. For example, the Black Solera Slider…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.