Is Additional Check Valve Required With Vacuum Connection Tee Installation on 2023 Ford Ranger

Question

Question:

When I install part #6257 vacuum tee does it require a check valve. Coach 2006 country coach Tow 2023 ford ranger

asked by: Jerome

0

Expert Reply:

You do not need an additional check valve to use the Demco Vacuum Connection Tee Fitting # DM6257. However, you will still need to use the check valves that came with your # SM99243 for installation.

expert reply by: Robin H

0

Answer 1

I spoke with Demco and their technician stated the easiest way to install your Demco Air Force One Supplemental Braking System w/ Wireless Coachlink - Air Brakes - Proportional Item #DM26VR is to cut the 90 degree angle fitting attached to your…

view full answer...

Answer 2

We do! The parts you're describing for the Demco SBS Stay-IN-Play DUO #SM99251 install on a 2022 Ford Ranger are the following: - Demco Vacuum Connection Tee Fitting #DM6257 - Replacement Vacuum Check Valve #RM-452142

view full answer...

Answer 3

Demco does have it listed that in Ford 2015+ vehicles that it's best to install the vacuum connection directly to the sensor port of the brake booster using part #DM6257. Most likely the issue you're facing is just caused by your connection…

view full answer...

Answer 4

Yes, you will still need to install the check valves with the Demco Air Force One Supplemental Braking System #SM99243 or #DM26VR, even if you use the Demco Vacuum Connection Tee Fitting #DM6257. It will still require you to install the check valves,…

view full answer...

Answer 5

The flat towing parts you requested for your 2023 Ford Bronco Badlands with a modular bumper are listed below the prices are on the right hand side of the product pages: Tow Bar and Safety Chains - Roadmaster Nighthawk All Terrain item #RM-676 Base…

view full answer...

Answer 6

Thank you for your purchase from etrailer of the Roadmaster InvisiBrake Supplemental Braking System #RM-8700. There is one other thing you may need for your 2021 Ford Bronco to use this system. If your '21 Bronco has the Signature LED taillights…

view full answer...

Answer 7

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 8

Typically, the wire colors are brown for running lights, green for right turn and brake lights, and yellow for left turn and brake lights. White is ground. To confirm this on a trailer you can trace the wires back to see where they terminate or take…

view full answer...

Answer 9

Depending on the lighting for the Bronco your brake light relay wire might not be useable. Models without the signature LED lighting will have a purple wire for the brake light, while models with the signature LED lighting will not have an accessible…

view full answer...

Answer 10

The Demco Air Force One Supplemental Braking System w/ Wireless Coachlink - Air Brakes - Proportional #DM26VR has a tee fitting that will require you to cut into the vacuum line to install. If you're wanting to know how to connect the vacuum line…

view full answer...

Answer 11

Demco does list in the installation manual for the Demco Stay-IN-Play DUO Supplemental Braking System #DM86VR that newer Ford's may need an additional check valve due to Ford using two vacuum lines, but I called my contact at Demco and confirmed…

view full answer...

Answer 12

Sorry to read you are having an issue with the installation of your Demco Stay-IN-Play DUO Supplemental Braking System w/ Wireless Coachlink Monitor, #DM86VR. I contacted the Demco Tech Reps and they have a suggestion, replace the rubber grommet in…

view full answer...

Is Additional Check Valve Required With Vacuum Connection Tee Installation on 2023 Ford Ranger

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching