Driver's-side hydraulic trailer brake assembly features a single-plunger design. Galvanized steel resists rust, making the assembly great for boat trailers. Mounting flange has 5-bolt pattern.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Demco Galvanized 12 Inch Marine Brake Assembly, part number 23511. This is a 12x2 galvanized hydraulic brake assembly. It's referred to as a 12x2 due to its dimensions which is from here to here is 12 inches and the width of the break shoe is two inches.It has galvanized backing plates, stainless steel spring hardware plated wheel cylinders, riveted marine brake shoes and this also works great on non-marine applications as well. It has a weight capacity of 6,000 pounds per pair or obviously 3,000 pounds for each assembly. This fits on your left hand side of your trailer, the driver's side. It says the word "left" right here but another way to tell is the short shoe always faces to the front of the trailer.It is a single servo which means it has a single plunger coming from the wheel cylinder.
It uses 12 inch hub and drums with wheel sizes of 14-1/2 inches to 16 inches. The mounting bolts are sold separately and this item does require a periodic manual adjusting. What that means is that you can see right here it has rubber plugs that fit over the adjustment holes. Whenever its time to adjust you just pop these out and make your adjustments through there.That should do it for our Demco Galvanized 12 Inch Marine Brake Assembly, part number 23511.
Average Customer Rating: 5.0 out of 5 stars (25 Customer Reviews)
Driver's-side hydraulic trailer brake assembly features a single-plunger design. Galvanized steel resists rust, making the assembly great for boat trailers. Mounting flange has 5-bolt pattern.
One Year Follow-Up - This was an extremely simple and cost effective option to repair my trailer brakes. One side had been contaminated by a leaky grease seal, but I replaced the brake assemblies, seals, bearings, and races on both sides of my single axle fresh water boat trailer at the same time. I estimate about 3000 miles on this trailer since installed and everything is still working great.
The Drum Brake Assembly was extremely great. The backing plate and the cylinder are plated so they will not rust or corrode. The springs are stainless steel so they will not corrode. They fit on my axle very good. I had no problem with them. They work just like when the trailer was new.
Perfect fit for my trailer axle and hub. Quality construction and easily a match for parts I purchased the week prior costing quite a bit more. Buy with confidence.
Replaced 23 year old brake assembly with this and it was a perfect fit. All of the components were installed on the assembly as described - just bolt on, attach brake line,bleed and go.
I have ordered items from etrailer before never a problem,this was before Covid and all the other problems since then this order took way longer to receive but I am thank-full they had what I wanted and was able to get it shipped to me I will still do business with them.
worked perfect on my 6000lb loadrite trailer. I added extra grease to the wheel cylinder bolts and adjuster threads. I'll be dunking it in saltwater.
Great experience. Installation video and customer service was very good.
items as described,quality parts, bolted right up..
great price, fast shipping.. thankxs etrailer
Great price, and was easy to install. Looking forward to many safe stops. The demo videos were most helpful.
These are excellent.
Great stuff
One Year Follow-Up - This was an extremely simple and cost effective option to repair my trailer brakes. One side had been contaminated by a leaky grease seal, but I replaced the brake assemblies, seals, bearings, and races on both sides of my single axle fresh water boat trailer at the same time. I estimate about 3000 miles on this trailer since installed and everything is still working great.
I had no idea that I could purchase an entire brake assembly - ready to bolt on! The local trailer dealers wanted $98 per wheel, just for the shoe lining alone. I saved over 60% and got all new parts. Put them on today, bled the brake lines, and went to pick up a skidsteer loader. Everything works perfectly. I will not buy trailer parts anywhere else from now on.
Dan
Perfect fit for my trailer axle and hub. Easily a match for a product I bought previously and costing a good bit more. Buy with confidence.
It was a great experience shopping on etrailers.com
They had everything I needed and checkout was fast
and easy. I had my parts in 2 days.
Thanks etrailer.com
Excellent product
very fast service and delivery
I appreciate the speedy delivery.
Good stuff
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.