To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port beneath your 's dash.
Features:
To install your Curt electric brake controller, you need to connect the wiring of the controller to your vehicle. Certain auto manufacturers offer pre-wired options, typically known as tow packages, wherein wiring is run for you from the dash to the trailer connector on the back of your vehicle. When this is done, a port is installed at your dash so that you can easily plug in a brake controller.
This adapter plugs into the port on your vehicle's built-in brake control wiring harness. The harness is located underneath the dash, to the left of the steering column, and it is taped to another harness near the emergency brake pedal.
No hardwiring is required to install this adapter. After you plug it into the factory port, you simply plug the other end of the adapter directly into your electric trailer brake controller. Because there are no wires to connect, installation is not permanent. You can unplug and remove your brake controller at any time to transfer it to another vehicle or securely stow it away.
California residents: click here
Average Customer Rating: 4.7 out of 5 stars (119 Customer Reviews)
Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port beneath your vehicle's dash.It does not fit my vehicle. On the attached photo the connector on the left is the stock dodge plug, the plug on the right is what I just got
Sorry for the late follow-up. I just wanted to let you know that the brake
controller and wiring harness I purchased through eTrailer worked very well
with my 2008 Dodge Ram 2500 with the Cummins 6.7L diesel. Pictures are
attached for your use, as required.
The trailer was an 18-foot enclosed snow machine tailer with a steel
chassis. I can't remember the empty weight, but it's substantial. We towed
empty and full on dry and snow covered roads from Oklahoma to Colorado and
back. Even with th exhaust brake on my truck, I can't imagine towing this
load through the hills and mountains without a brake controller. It's been
done before, but I would say it's an unnecessary risk given the more than
reasonable prices at eTrailer...it was cheap insurance pulling such a heavy
rig with my family on board.
The controller was definitely not your top-of-the-line model, but the
adjustability and controls were more than adequate for somebody who tows
occasionally. A professional may desire more proportional controls and
adjustability, but not much more. This unit peformed flawlessly.
Thank you for your time. Please feel free to contct me if you would like
any clarification on my statements or pictures.
This item easily plugged into my Curt brake controller and into my truck’s factory plug. Made for a less than 5 minute install; powering up the brake controller with no issues. Convenient is an understatement with this pigtail. Rig is 2007 Dodge Ram 2500 4X4 CTD.
Perfect fit for my 1999 Dodge Ram. it made installation of the brake controller super easy. I highly recommend paying the extra $** for this item.
The folks at etrailer are the best! Very helpful and knowledgeable!! The product I received fit perfectly and works great!!
Tim
9/3/2023
Still working great!
y0u want good go to etrailer was a perfect fit
I ordered a fifth wheel brackets and hitch along with curt brake controller and pigtail. Everything fit great with no problems and the service and shipping was very speedy. Highly recommend etrailer for all your needs.
2006 Dodge Ram. Easy install. Plug it in and tie up the wires. I put a wire protector sleeve to cover the wires coming out of the controller.
Trailer control shipped quickly, super easy install with the pigtail. Happy customer!
fit and finish was perfect.
In hind sight I probably didn't need to order this item. Forgetting how difficult it was to access the connector on my Dodge Ram when I installed my first (now defunct) brake controller, I imagine it will be a greater struggle to get it to disconnect before putting the new one on. So I think what I'll do is cut the Dodge specific connector off the one end, cut the wires off my old controller and splice this pigtail into it, thus eliminating the need to remove the old connector!
Jeff M.
9/25/2018
My splice job worked as planned however I no longer own that vehicle.
I needed an electric brake control for my 2006 Dodge pickup but was having trouble finding one locally that would plug in to the factory installed plug. If it was a Chev or Ford it was in stock and I didn't want a universal that would have to cut into the wiring. I called etrailer to make sure what I saw on their website was correct and they assured me it was so I ordered it. It arrived, I instaled it and it works perfect.
Michael D.
7/16/2017
Still working fine.
The directions on this item are horrible. I finally figured it out and was able to install it onto my Ram 1500, but only after spending hours trying to make everything fit right. If you're looking for a hitch setup to pull a trailer long distances, I would advise you to look at other options. This will work for my short trips with my half-ton pickup, but I would not want to pull anything more than 50 miles with this setup.
Fast Shipping! Works great! Easy to ins tall!!
Used in conjunction with the Curt brake controller I purchased from etrailer.
Worked perfectly.
Larry W.
4/18/2015
Works fine No reliability issues, worry free.
I ordered the Curt TriFlex trailer brake controller. Had to return the first one, due to the manual brake activation lever being sloppy loose. They replaced it with no hassle. It looks cheap but works good so far
My 07' Dodge Ram Quad Cab had a factory installed receiver hitch and therefore the plug to which this cable attached. However, I had to go to the Curt mfg website to find a picture of the actual truck plug. Once I found the plug which was buried up in a difficult spot to reach, the cable snapped in easily. It is sufficiently long enough to reach the controller cable if one installs the controller anywhere on the knee panel below the steering wheel.
Worked great performance as described
I ordered a Curt Discovery trailer brake controller. Exactly what I was looking for and for a great price. Transaction was smooth and easy and the controller arrived within a reasonable amount of time. I liked the parcel tracking that showed the progress of my order.
I used this connector with a new brake controller that I also purchased. It was very easy to connect to the controller & truck's electrical system (under the driver's side dash). So far it's working beautifully.
As always, etrailer was excellent with their advice, shipping, and follow-up emails. I have had great experiences with them since 2010.
The Curt wiring adapter made installation of the Curt Triflex brake controller on our 2008 Dodge Ram 3500 a breeze. Just plug one end into the brake controller plug and the other into the pre-existing plug-in all ready under the dash, then added a couple zip ties to keep it up and out of the way. It couldn't have been any easier. The plug in connection also allows the brake controller to be moved easily from truck to truck if needed
Curt Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In - C51332
Item fit exactly and directions was very specific as to where to plug in in. Items were shipped promptly and was as described.
ordered to hook up a curt brake controller in my 2007 Ram Megacab,perfect match up to the factory harness,if it was only about 6" longer i could have mounted the controller where i wanted it to go
Great product and great service from etrailer.com. It's wonderful etrailer makes it so easy to match the brake controller and adapter harness for your respective vehicle. It took me a total of 10 minutes to install on my 2006 Dodge Ram 2500
Order the wiring harness for my 09 Dodge Ram, was extremely easy to install, the plug under the dash was facing straight out and easy to get to. I ran the harness over the transmission shifter linkage to keep it hidden, plugged into the brake controller, then hid those wires to not be seen when door is open or sitting in truck, I don't like loose exposed wires.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brooke M.
8/23/2023
Hmm...youll be looking for another white plug like the white harness. Do you know if your truck for sure has the factory tow package?