Troubleshooting Flashing 0.0 Error Message on Curt Discovery Brake Controller # C84VV
Question:
Installed the Curt C84VV in my 1998 Dodge Ram 2500 using the Curt 51333 quick plug harness. Plugged everything in and no error codes were displayed. Plugged in a trailer and all lights worked but when I pushed the brake to adjust the output the controller displayed a flashing 00. If I pushed on the brake pedal and adjusted the output all the way left or right to 0 or 10 the display quite flashing but the trailer brakes didnt work. the flashing 00 only displays when a trailer is connected and the brake pedal is pushed - what does this mean?
asked by: Zach G
Expert Reply:
The troubleshooting guide included in the instructions for the Curt Discovery Brake Controller # C84VV that you referenced does not include this particular display issue, a flashing 0.0, among the possible display messages.
My technical contact at Curt has never seen this particular message displayed on a Discovery brake controller. He suggested that either the display is malfunctioning or the controller is bad. Since your brakes are not engaging when you press the pedal with the trailer connected it could be that the unit is damaged. Do please note that this controller can be used ONLY with electric trailer brakes, not with an electric-over-hydraulic (EOH) actuator. The correct harness for your truck is # C51332.
You can try checking your controller installation and trailer wiring for any signs of damaged wires, shorts or anything wired incorrectly. The linked article on troubleshooting may help.
I could not find a purchase record for you so I do not know how old the unit is or where you purchased it. But since it is covered by a limited lifetime warranty from Curt I suggest you contact them or the place of purchase with your concern if you cannot correct the issue using the guidance in the article.
Products Referenced in This Question
Curt Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Vehicle Specific
- CURT
more information >
Product Page this Question was Asked From
Curt Discovery NEXT Trailer Brake Controller - 1 to 4 Axles - Time Delayed
- Trailer Brake Controller
- Time Delayed Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Troubleshooting Brake Controller Installations
- Shop: Mighty Cord RV Power Cord Adapter - 30 Amp Female to 15 Amp Male - 12" Long
- Shop: RV Plug Adapters
- Search Results: lithium battery
- Search Results: dog bone
- Search Results: trailer brake controller
- Shop: Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - GM
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet and KodaGuard - 3,500 lbs
- Search Results: prodigy p3
- Shop: Brake Controller
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - GM
- Article: Trailer Wiring Diagrams
- Q&A: Troubleshooting Curt Triflex Brake Controller that Is Flashing Numbers Randomly without Trailer
- Q&A: Wiring Diagrams for Installing Bright Way Trailer Breakaway ICU Kit # BW94FR
- Shop: Kodiak Disc Brakes - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet/KodaGuard - 3,500 lbs - E-Z Lube
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Q&A: Do I Need an Electric Brake Controller to Tow a Trailer with Brakes if My Truck Has a Factory 7-Way
- Video: Kodiak Trailer Hubs and Drums - Hub - Q-HUB84545 Review
- Search Results: teflon disc
- Shop: Trailer Hitch
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Video: Choosing the Right Brake Controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: brake controller
- Shop: Trailer Wiring
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Video: Choosing the Right Trailer Wiring
- Shop: Suspension Enhancement
- Video: Tekonsha Prodigy P3 Trailer Brake Controller Review
Ross S.
7/27/2020
As to the flashing 0.0 display, I have the exact same problem on my 2011 Ford F150 (But used, don’t know the age of the controller). I will work with the comments above, and I have ordered another unit to test with. Will let you know.