Best RV Hitch Options Video

Okay let's get started here with the suspension for your 2012 Skyline Koala 27CDS with 3,500 lb Axles; for the first part regarding your equalizers and suspension upgrade kit, so long as your current equalizer is spaced 6 inches (or close to it -…

From the crosstube to the face of the receiver is 5-1/4" for the Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames #UF35-946403. I've attached a dimensional photo for you to reference as well.

If you are concerned about the performance of your older trailer breakaway kit you can test it by following the process outlined in the linked article. If you find it does not work properly you can replace it completely or just replace select parts.…

Normally the Mount-n-Lock SafetyStruts Universal RV Bumper Support Brackets #MO34VR install on outsides of trailer frame. I attached an install video for this for you to check out as well.

From how you're describing your set up, it sounds like your bumper is attached to a tube frame, and there is a way for you to install the support brackets, which are the following part number: - Mount-n-Lock SafetyStruts Universal RV Bumper…

The Curt #C13704 hitch can be used on a trailer with frames up to 66” wide. For frames up to 68-3/8” wide order the Lippert #LC240220, or if you need smaller order the Curt #C13701 for frames up to 51” wide. This last Curt hitch has a 2” drop that…

I went out to the warehouse and measured the mounting plate of the Ultra-Fab 2" Trailer Hitch Receiver for 5th Wheel Trailer Frames, #UF35-946403, you'd be welding. It is 4 inches wide, 3 inches tall, and 2 inches long. I've attached a…

The Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames #UF35-946403 is an adjustable hitch that will fit inside 2002 Nash 19I with I-beam frame as long as you have clearance at the rear when inserted on the inside of your I-beam. It is…

The arms of the Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames #UF35-946403 can be taken out and rotated so the welding bracket is on the backside. The receiver tube is 2-1/2 inches square and the arm with the brackets is 2 inches square…

I looked up your GR-9994 regulator and it's a dual changeover vertical regulator so for a cover you'd want the part #CAM59344 and you'd be set.

The Safety Struts you have now on your RV frame/bumper would work well with the 24x60 etrailer Cargo Carrier for RV Bumper #e99049 that you mentioned. You can use them instead of the brackets that come with the carrier and you'd be perfectly…

You could weld the Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames #UF35-946403 to the box frame that's welded to the frame of your 2019 Grand Design Imagine 2600RB travel trailer but would need to have a fabricator come out and look…