Multi-Fit Motorhome Trailer Hitch, 24" - 46" wide

See what our Experts say about this Draw-Tite RV and Camper Hitch

• Trailer Hitch to Carry Motorcycle for 1989 Collins/E-350 School Bus
  It's tough to tell from your picture which part of the frame I'm looking at, so if you can provide me with some more information on if that is a picture of the rear of the bus and those points on the frame are where you're mounting, I can give you an answer with 100% certainty. The Draw-Tite Multi-Fit Motor-home Trailer Hitch # 5350 will fit as long as there is 5-1/2" of height inside the frame to mount the bracket into. The one thing that worries me with the Draw-Tite hitch is that there...
  view full answer...
  
• Front Mount Hitch with 32 Inches Between Mounting Holes
  Because all of our front mount hitches are custom fit to a specific year, make and model of vehicle, the mounting hole distance is not a spec that's listed or typically needed on them. If you're not using the hitch for a specific vehicle but rather for special fabrication project, you may be able to use one of our universal RV hitches like # 5350 which is adjustable to fit frames 24 to 46 inches wide. The Multi-Fit Motorhome Trailer Hitch has the highest capacity (500lb TW and 5,000lb...
  view full answer...
• Travel Trailer Hitch that can Clear a 4-Inch Bumper
  You are right to be concerned about overloading your bumper. While your bumper might be able to handle that amount of weight, I don't recommend testing it. The Multi-Fit Hitch, part # 5350, that you mentioned is an excellent alternative. It measures 7 inches from the center of the tube to the front of the receiver, so it should clear your 4-inch bumper with no problem. It has a gross tongue weight of 500 pounds, so the accessories that you mentioned won't be a problem either. Of course,...
  view full answer...
• Recommended Trailer Hitch For A 1996 Toyota Land Cruiser Prado
  I may have another option available, but as all the hitches we carry are for US market vehicles, I cannot confirm the fitment on a Japanese market 96 Toyota Land Cruiser Prado, unfortunately. However, I did include a quick diagram of how the Curt # C12181 hitch will measure as it may still work for your vehicle. If these measurements do not add up though, the only other thing I can recommend is something like the Draw-Tite Multi-Fit # 5350. This will fit a frame that is 24" to 46" wide...
  view full answer...
  
• Front Mounted Trailer Hitch Receiver for 1985 Dodge Van
  There aren't any front-mounted trailer hitch receivers that are custom designed to fit for a 1985 Dodge B350 and your bumper is not structurally strong enough to work with the Curt RV Bumper 2" Trailer Hitch Receiver # E-100. What that means is the only option that might work is a universal, adjustable-fit hitch such as the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" wide # 13703 or the Multi-Fit Motorhome Trailer Hitch, 24" - 46" wide # 5350 or 47" - 71" wide # 82201. These...
  view full answer...
  
• Front Mount Hitch for 2019 Ford F-550 Shuttle Bus
  I do have an option for you, however there isn't a custom front mount hitch available that's designed to fit your 2019 Ford F-550 shuttle bus. Your best option is going to be with a universal model like the Draw-Tite Multi-Fit Trailer Hitch # 5350 that will require some drilling. This particular hitch features adjustable brackets that allow it to fit frame rails that are 24" to 46" wide. The brackets will get bolted to the frame to provide you with a crosstube and 2" receiver. I just...
  view full answer...
• Recommendations for Carrying Kayaks and Bikes while Pulling Travel Trailer with 2002 GMC Sierra 1500
  I have a way to help you carry all of your equipment at the same time or individually on your 2002 GMC Sierra 1500. First, I recommend the Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs # D210. This will work as long as your travel trailer is less than that 7500 lb capacity. This will allow you to carry a bike rack and tow a trailer, or it will allow you to tow a trailer and use a load extender for your kayaks. I recommend the Rhino-Rack...
  view full answer...
• Can Multi-Fit Motorhome Hitch Brackets be Bolted Inside C-Frame
  Yes, if you'd like to put the flange of the bracket on top of the C-frame beam and bolt it there you can do so with the Multi-Fit Motorhome Trailer Hitch # 5350. So long as it is properly bolted to the specs in the instructions and the crosstube is correctly flush or extended through the side brackets then you can install the # 5350 in the manner you described.
  view full answer...
• Trailer Hitch to Carry a Generator on the Back of a Travel Trailer
  For a cargo carrier holding a generator at the back of a travel trailer I definitely recommend installing a frame mounted trailer hitch. It is unlikely that a bumper will be rated high enough to carry the generator and carrier and be able to withstand the stresses involved. If your trailer has a frame that measures 31 inches to 46 inches wide, I recommend installing hitch # 5350. I have included a link to the installation details and I recommend having the hitch professionally installed....
  view full answer...
• Is There a Trailer Hitch for a 1992 Cadillac Brougham
  I may have an option for you but there aren't any custom fit trailer hitches for a 1992 Cadillac Brougham. Therefore, in order to attach a trailer hitch you'll need to do some modifying and or fabricating of your own. The best option we have for this is the Multi-Fit Motorhome Trailer Hitch part # 5350. The reason this option is best is because the width of the hitch can be adjusted for your frame and the two bolt mounting design would be pretty easy to mirror onto the frame as well. The...
  view full answer...
• Installation of the Multi-Fit Motorhome Trailer Hitch, Item # 5350, No Welding Required
  Welding is not required for installation of the Multi-Fit Motorhome Trailer Hitch, item # 5350. Once you have the tube cut to length, be sure it is centered on the vehicle, you will need to drill 1/2 inch holes in the cross tube to secure it to the brackets. There are holes in the receiver portion of the brackets to use as a template for drilling the cross tube (see instructions).
  view full answer...
• Solution to Carry Harley Davidson Road King Behind Motorhome
  While it's possible for you to take your Harley with you when traveling in your motorhome, a motorcycle such as your Harley Davidson Road King is much too heavy to be transported in a hitch-mounted carrier, which is why there is not a carrier made for one, or a hitch with the necessary tongue weight capacity. You can safely transport your Harley Davidson Road King, but you will need to do it on a trailer behind your motorhome. The good news is you can do it safely and easily with the B&W...
  view full answer...
• Trailer Hitch Recommendation for 2008 Chevy Express Van with Cutaway Chassis
  For your application I recommend checking out the Multi-Fit Motorhome Trailer Hitch # 5350 which can fit frames up to 24" - 46" wide and has bolt holes that measure 8-5/8" apart on center (see attached). All of the custom fit hitches for a 2008 Chevy Express Van won't fit the cutaway chassis which is why you need to look into more of a universal fit like this. The mounting brackets for this hitch are adjustable to fit different applications so you'll need to make sure this works for your...
  view full answer...
  
• Trailer Hitch and Bike Rack for Motorhome to Carry 70 lb Electric Bike
  While there is a way for you to carry a 70 lb electric bike on the back of a motorhome, there are no ladder-mounted bike racks that have the capacity to carry a 70 lb bike. Instead you will need to add a trailer hitch, the Multi-Fit Motorhome Trailer Hitch # 5350, which you can do so long as your motorhome has a chassis from 24" to 46" wide, or the Multi-Fit Motor Home Trailer Hitch # 82201 for frame widths from 47" to 71" wide. Once you have the right hitch you will simply need a bike...
  view full answer...
• What is the Mounting Hole Spacing for Motorhome Hitch 5350
  Motor home hitch # 5350 features two holes on each side bracket for mounting the hitch to your frame. The bolt holes are spaced 8-5/8 inches apart, center to center, and are 1/2 of an inch in diameter. I have included a link to the installation instructions for the hitch.
  view full answer...
• Multi-Fit Motorhome Trailer Hitch For 34 Inch Wide Ford F-53 Frame
  The hitch you referenced, the Draw-Tite Multi-Fit Motorhome Trailer Hitch, 24" - 46" wide # 5350 will fit the 34 inch frame on your Ford F-53. It is not designed as a custom fit, however, which means you will need to drill in order to install the hitch. The Draw-Tite measures 8-5/8" between the mounting holes on its brackets. I have added a link to a video review of the Draw-Tite # 5350 for you to check out.
  view full answer...
• Receiver Hitch Recommendations For A 2021 Flagstaff E-Pro 19 FBS
  To add a receiver hitch for a bike rack you'll actually connect the hitch to frame of your RV and not use the bumper as most aren't rated to hold the weight of a bike rack and bikes. You'll need to measure from beam to beam to see what frame distance you have. The Multi-Fit Motorhome Trailer Hitch, 24" - 46" wide Item # 5350 you linked to will attach to a frame distance of 24" to 46". We also offer the Curt Adjustable Trailer Hitch Receiver - 18"-51" Wide - 2" Drop - Class III - 2"...
  view full answer...
• Trailer Hitch for a 2004 Coachman RV to Tow a 5,000 Pound Trailer
  For your RV and the 5,000 pound trailer I recommend using an RV hitch that is rated for weight distribution such as # C13701 or # C13702 and to use a weight distribution system. This is because the hitches max out at 5,000 pounds with the exception of these 2 (when used with weight distribution). But to use either of these you would have to get the tongue weight down to 600 pounds or less, even when using weight distribution, to be able to tow the trailer. If you cannot get the tongue...
  view full answer...
• Adjustable Trailer Hitch Receiver Options For A 2018 Jayco Pinnacle 5th Wheel
  You shouldn't have any issues fitting the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide # 13703 to your 2018 Jayco Pinnacle 5th Wheel, however you'll want to measure your frame's width to be certain. We do also carry a larger one # UF35-946403, which fits trailer frames 47-1/8" to 77", or, should you need a smaller one, we also have the: -Adjustable Width Trailer Hitch Receiver for RVs, 18" to 51" Wide # C13702, -Multi-Fit Motorhome Trailer Hitch, 24" - 46" wide #...
  view full answer...
• Recommended Trailer Hitch for 1986 Chevrolet Coachmen Motorhome
  I do have an option for you but there aren't any custom fit, bolt-on hitches for this vehicle. Instead, you'll need to go with a universal trailer hitch and for this I recommend the Multi-Fit Motorhome Trailer Hitch part # 5350 which features an easy two hole (per side) installation with adjustable width and capacity up to 5,000 lbs if properly installed.
  view full answer...
• Towing Capacity of 2016 Winnebago Forza 36G Motorhome
  From my research, I found that the maximum towing capacity is listed as 5000 lbs. I'd recommend checking with Winnebago to see what the actual towing capacity of the motorhome is. If the actual towing capacity is indeed greater than 5000 lbs, you can increase that capacity by going with a higher rated hitch, however whichever hitch you use, you'll still need to abide by the actual towing capacity of the vehicle. We do offer some multi-fit hitches for motorhomes, but their capacities...
  view full answer...
• Trailer Hitch Option For 2004 Mitsubishi Mini Truck
  There is an option you can use with a universal hitch, but none have a 1-1/4" receiver. What you can do is use a hitch reducer adapter, but the only option is indeed a 2" hitch. What you can use is the following: - Multi-Fit Motorhome Trailer Hitch # 5350 The # 5350 is titled "motorhome" because that's what people use it for most often, but it's just a universal hitch. It will fit frames that are 24" to 46" wide, so it's going to be perfect for your 38-1/2" frame width. Then if you...
  view full answer...
• Recommended RV Trailer Hitch For Motorhome with C-Channel Frame
  I do have an option for you but the Reese Reese Multi-Fit Motorhome Hitch part # 5350 is not confirmed to work with a C-Channel frame. I recommend to use Adjustable Width Trailer Hitch Receiver for RVs part # C13702 which is designed to fit 18-51 inch wide frames. Curt has confirmed this hitch will work well on C-Channel frames like what you have on the Jayco Greyhawk 26ss. I have attached a video for your reference.
  view full answer...
• Trailer Hitch for a 2015 StarCraft 19BHLE
  There isn't a fit list for trailer hitch # 5350 so you have to go by how it installs and its measurements. This hitch fits frame widths from 24 to 46 inches wide. Frame width is measured from the outside of one frame rail to the outside of the other frame rail. To install the hitch it will need to be bolted to the bottoms of the frame rails so the frame must be clear at the back. I have included a link to the installation instructions so you can compare them to the underside of your trailer...
  view full answer...

Do you have a question about this RV and Camper Hitch?