Customers compare RE94FR to these similar products
Products Featured in this Video
Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this Reese Pro Round Bar weight distribution system with sway control. This is designed to help balance out your trailer when you're towing. So, rather than having all of your trailer's tongue weight pushing down on your one connection of the coupler and your hitch ball, which oftentimes can cause a lot of weight on… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Yes, you can get a set of lighter spring bars for the 8,000 lbs Blue Ox TrackPro Weight Distribution w/ Sway Control item #BLU67FR. They are the Replacement 600-lb Spring Bars for Blue Ox TrackPro Weight Distribution System item #BLU82FR.
view full answer...I think you'll need to go up a level in weight rating for your 5,000 lb GVWR Airstream travel trailer. The reason being the Reese Pro Round Bar Weight Distribution #RE34FR is for loaded tongue weights between 200 lbs and 600 lbs. I assume the 520…
view full answer...The rule of thumb for estimating a tongue weight is 10-15 percent of trailer weight. A 4,600 pound trailer would have a tongue weight between 460 and 690 pounds. Somewhere between a 1,000 to 2,000 pound capacity jack would be fine. Having a jack that…
view full answer...The only weight distribution systems that do not allow backing up are those that use friction sway control (which is an added piece), so yes, you can absolutely back up with the Reese Pro system you asked about, which is the following part number: -…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...With most weight distribution systems (including this Reese kit part #RE94FR), you can back up with the spring bars connected as long as you are backing up mostly straight, but if you are going to angle the trailer and tow vehicle sharply you need to…
view full answer...Yes, based on the weight of the Grand Design 2023 23LD that I was able to find online the Curt weight distribution system part #C69JR would work great with it.
view full answer...The Reese #RE94FR only requires a ball with a 1-1/4" diameter shank and the capacity to match the system. Although there are no specific balls from Reese, you can use the Curt #A-90 as a replacement for the 2-5/16" ball you have now. If you…
view full answer...Suspension enhancement systems can be used with a weight distribution system without any problem, in fact, a weight distribution system is going to be more effective at leveling out your load than the helper springs in the sense that it will…
view full answer...I added a cut out for you showing the distance needed from the hitch ball to the brackets for the Reese Weight Distribution System #RE94FR. As you can see, that distance needs to be between 24-1/2" and 27-1/2" for this system. It has an…
view full answer...There is a weight distribution hitch option for your new 2021 Intech Flyer Discover with a completely covered A-frame. Instead of using a standard weight distribution hitch which has brackets that go around the frame you will need to use a weight…
view full answer...I do recommend you use a weight distribution system on the Intech Explore Travel Trailer while towing with your 2018 Toyota Highlander. The reason for this is because the weight of the trailer will be over half the weight of the vehicle which is the…
view full answer...