Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Two points of steel-on-steel friction work to prevent and correct trailer sway in this weight distribution system. Sway control brackets help to ensure that your trailer stays in line with your tow vehicle. Adjustable shank included.
Features:
Specs:
| Included w/ System | Required - Sold Separately | Optional Add-Ons |
|---|---|---|
|
| n/a |
Create a more stable ride for your tow vehicle and trailer with a weight-distribution hitch. Adding spring bars to your towing system applies leverage, which transfers the load that is pushing down on the rear of your vehicle to all the axles on both your tow vehicle and your trailer, resulting in an even distribution of weight throughout. The result is a smooth, level ride, as well as the ability to tow the maximum capacity of your hitch.
The tongue weight rating is the most important factor in determining which size weight-distribution system you should use. If the bars of the system you choose are rated too high for your setup, they will create a rigid ride, which can result in a bouncing trailer. If, on the other hand, the bars are not rated high enough, the system will be unable to properly distribute the weight, rendering it virtually useless.
To determine the proper weight rating for a weight-distribution system, you must first determine your trailer's tongue weight. Then add to that the weight of the cargo behind the rear axle of your tow vehicle. These two measurements make up the tongue weight rating for a weight-distribution system.
The two points of sway control within the e2 are created by the steel-on-steel friction that occurs when the spring bars slide within the L-brackets that are mounted on the trailer tongue. Most traditional weight-distribution systems have spring bars that are suspended by chains. Although this ensures that the system is not so rigid as to create bounce in the trailer, it also allows a good deal of side-to-side play in the system.
The direct friction that is applied to the spring bars in the e2 system helps to stop sway once it has begun. The concept is similar to the way in which an add-on friction sway control device functions. When each spring bar moves forward or backward, or side to side, it rubs along the bracket, creating friction. The resistance created by this action limits the movement of the spring bar, thus preventing further side-to-side movement of the trailer.
Most add-on units feature some sort of friction material similar to that used in automotive brakes. But the e2 uses direct steel-on-steel contact to create resistance. This is the same sort of friction that is used with locomotives that pull loaded railcars weighing tons. No additional materials are needed. The steel will outlast any of those other materials, providing an extremely durable, functional sway-control system.
Average Customer Rating: 4.7 out of 5 stars (597 Customer Reviews)
Two points of steel-on-steel friction work to prevent and correct trailer sway in this weight distribution system. Sway control brackets help to ensure that your trailer stays in line with your tow vehicle. Adjustable shank included.
I bought this Trunnion hitch specifically for weight distribution as I have a lot of tongue weight on my trailer. It does a great job of putting some of that weight back on the trailer. You must check the tension bolt before every trip as it work’s loose and could ruin your day if it came out.
Very happy with the product quality, instructions, and performance of the hitch system. I would highly recommend to anyone needing this type of hitch.
etrailer service is great and the customer service is awesome. The only gripe is the packaging and is not really etrailers fault. UPS ans Fed Ex beat the living daylights out of thier shipments. I am lucky to have all the parts and the hitch was scratched up pretty bad from the abused shipping. Maybe if the boxes were shrink wrapped they would hold up better in shipment. Very fast shipping and I will be using etrailer in the future!
Fantastic hitch but make sure you take some time to get it set up. I had to assemble/disassemble/reassemble it a few times to get it set up correctly. Also, I had to go to my local trailer shop to properly torque the hitch ball. Not only did I not have a 1 7/8" socket, but I couldn't torque it to 450ft lbs.
Now that it is installed and dialed it it works great.
They work great. It took awhile to find a wrench big enough to install the 2 5/16in ball hitch and the parts associated with this system. I didn't have any sockets that size. But, after about two hours, everything was working great.
I am very pleased with my Fastway Weight Distribution System. This order was delayed due to the supplier having problems delivering the product but Noahe kept me informed during the hole process. I will definitely purchase items from etrailer in the future.
Excellent customer service and very helpful in making a decision about the correct hitch. Delivery was fast and followup by Madison was perfect. Pat R
etrailer had always been great to work with. When the package tracking hadn’t updated in a few days the CS at etrailer assured me everything was good. Sure enough that same day the tracker showed that my package was only 3 hours away and would be here the next day.
The e2 hitch is really easy to set up and I’m very pleased with my purchase and would go through etrailer agin to purchase it.
Looks good so far I haven't tried it out
Love it! Easy to follow install instructions. Simple / quick hook up and removal.
Fortunately we recieved all parts as the box was completely blown out upon arrival with bolts, washers, and trunnion bars falling out across my driveway. UPS really does not care about the cargo they carry, but I know if parts were missing that etrailer would make it right!
Ease of installation
Would not pull a trailer without it. Easy to install, easy to use. No sway with this hitch.
Works great. Leveled out my 1/2 ton pickup pulling my Ice Castle. Installs rather easily. Excellent product.
Excellent - Works great and etrailer is a excellent company to deal with. Appreciate the customer service!!
Customer service was excellent and helped with questions I had. The hitch was exactly as described.
Been using this for about a year, no issues at all. It is a little loud, but i understand most of them are. great product.
Great product! !! Easy to install and made towing the vehicle a lot easier.
Very happy with the product so far, very easy to assemble.
Great help ordering and quick shipping!
Fixed my dangerous sag issue on my Tahoe. Would recommend!
I bought the hitch to tow our Winnebago 2108 DS, which has a dry hitch weight of 436 lb (~559 lb gross). So I bought the FA92-00-0600 model. Our tow vehicle is a GMC 1500. I followed Fastway’s instructions for setting up the hitch. At first glance, they seem a bit technical, with measuring the front of the vehicle, etc. But it was really pretty straightforward. I used the recommended 6 washers and it was perfect. I used my torque wrench, except for the ball – I just gave that everything I had. I am an amateur mechanic, and I found the hitch to be well-engineered and well-built. Definitely a quality product. Towing is inherently dangerous overall and can be stressful if not done right. So quality was important to me for a component that is so critical to the experience.
My experience towing was that I was pleasantly surprised. There is no sway. No noise. We can go 80 mph on the freeway. We go off-highway a lot. My wife noticed the lack of paint where the bars rub, but that is the way that the friction joint was designed to work. The only weird thing for me was using our trailer’s electric tongue jack to lift the front of the trailer and rear of the truck at the same time to install the bars. I wasn’t sure the jack was designed to do that, but it seems to work just fine.
The solution to dangerous issues. This system resolved many of my towing issues. I tow a food trailer. The hitch sagged and the lowered hitch raised the front end of my SUV. I also experienced sway and buffeting when tractor-trailers passed. Windy, wet nights and big trucks were white-knuckle drives. NO MORE.
Nobody does it better than etrailer! They answer their phone! They are truly knowledgeable about their products and care about their clients. My first call directed me to my precise options. I ordered it on-line and it arrived a day ahead of schedule. I watched their exceptional installation video three times before attempting installation. This is what sets ET apart. They did not have one video - they had two - one for a truck and one for an SUV / VAN. What was not covered in the videos was only a call away. PAY ATTENTION HERE: The rig uses a set of stacked-washers to adjust the "angle" of the hitch ball. The more washers you use - the greater the angle and the higher the tension of the torsion bar. If you begin with too many washers, you may find that after you use the provided torsion bar installer (a variant on a crow-bar) to install your torsion/control-bars. YOU MAY NOT BE ABLE TO GET THE BARS BACK OFF! That was my case. And if you cannot get the bars off - you cannot remove the tow vehicle. I had no idea how to release all of that pressure without potentially hurting myself. Ugh. ONE CALL - THAT'S ALL! A quick call to ET. The rep understood my problem but he also understood that mine was a dangerous issue and sought additional help internally. He came back with "...this is going to sound odd but trust me. Chock your wheels. Raise your tow vehicle from the center of the tow bar until you raise your rear wheels off of the ground and until you can move the bars manually (a light tap with a hammer is a good indicator as to whether you have relieved enough pressure by raising the tow vehicle). When you can swing the bars manually - swing them out and away from the trailer and if you swing them far enough toward the tow vehicle, they will simply fall out of their socket. (There is also a release tab you can pull out - but I prefer this method.) It WORKED!
Adjusting this type of system can be an arduous task that is well worth the effort and no company does a better job of selling, educating and servicing than ET. My local tow shop wanted to install a "chain" system without sway control and when I asked him what he thought of the "bar" systems - he said, "...hmm, I've never seen those before". Go with the experts and your own mechanical expertise. ET has your back.
Installed the Fastway E2 hitch on an 2019 F150 to tow a 19 ft travel trailer (E-Pro 19FD) which has 480 ibs tongue weight, trailer loaded is about 3800 lbs. I towed a few trips without a WDH and there was an annoying "bounce" or teetering at the hitch point (on roads that were not perfectly smooth) and a small amount of sway at highway speeds. I Just finished testing and the hitch reduced the bounce and sway and improved overall handling. I did have a problem with the UPS delivery and Nicol T at etrailer immediately got it straightened out and I called customer support with an install question and they were also excellent. My truck already had the timbrem SES rear suspension kit and I needed to know if that changed the install process (since the bed of the truck will not go down once the bumpers is on the axel - about 1 inch). Anyone installing this hitch - watch the install video along with the instruction manual...
Do you have a question about this Weight Distribution Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Steve
4/15/2019
Great, no complaints, durable, and reliable, used my 3/4 drive socket set for installation