Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient
(814 reviews)
Price: $69.99
In Stock
Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient
Retail:$74.53
Our Price: $69.99
You Save: 6%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (814)
- Q & A (0)
- Photos
Derale Transmission Coolers
- Plate-Fin Cooler
- Mid-Size Truck
- SUV
- Van
- With 11/32 Inch Hose Barb Inlets
- Standard Mount
- 11W x 8-3/4T x 7/8D Inch
- Derale
11" Wide x 8-3/4" tall x 7/8" deep, efficient heat exchanger will prolong the life of your transmission and improve its overall performance. Specifically designed for vehicles with late-model, electronic overdrive transmissions.
Features:
- Prolongs life of transmission
- Improves overall performance
- Prevents heat-related failures
- Has furnace-brazed aluminum construction and 3/4" wide turbulator plates for more efficient cooling
- Includes complete mounting kit, OEM spec hose with stainless steel clamps and Insta-dapt radiator adapter
- Recommended for full-size cars, trucks and SUVs
Specs:
- Inlets: 11/32" hose barb
- Overall dimensions: 11" wide x 8-3/4" tall x 7/8" deep
- Distance between inlets: 10-1/4"
- Mounting dimensions: 8" tall by either 5-1/4" or 6-3/4" wide
- Hose length: 4'
- 1-Year warranty
Note: The Derale Insta-dapt radiator adapter fits most vehicles with 5/16" transmission lines, but not all. In some cases, additional fittings or alteration of the OEM lines or hoses may be required for installation.
One of the more popular cooling systems available, the radiator-style, plate-and-fin heat exchanger provides increased surface area so that fluids can spread out along the finned chambers to cool faster. In addition to the increased surface area, this cooler also features turbulator technology, whereby fluids are agitated continuously, not only to facilitate heat transfer, but also to prevent any undesirable drop in pressure.
13503 Derale Series 8000 Plate and Fin Heat Exchanger with Installation Kit
Hidden Hitch # HH41310
Hayden Automotive # 678
Replaces HH41310
Item # D13503
Installation Details
This Product Fits The Following Vehicles
- 1962 - 1968 Volvo 122 1.8L I4 Engine
- 1967 - 1968 Volvo 140 Series 1.8L I4 Engine
- 1969 - 1974 Volvo 140 Series 2.0L I4 Engine
- 2014 - 2018 Ram 1500 3.0L V6 EcoDiesel Engine
- 2013 - 2022 Ram 1500 3.6L V6 Engine
- 2010 - 2012 Ram 1500 3.7L V6 Engine
- 2010 - 2013 Ram 1500 4.7L V8 Engine
- 2010 - 2022 Ram 1500 5.7L V8 Engine - HEMI
- 2019 - 2019 Ram 1500 Classic 3.0L V6 EcoDiesel Engine
- 2019 - 2024 Ram 1500 Classic 5.7L V8 Engine - HEMI
- 1970 - 1975 Volvo 164 3.0L I6 Engine
- 1968 - 1968 Volvo 1800 1.8L I4 Engine
- 1969 - 1973 Volvo 1800 2.0L I4 Engine
- 2011 - 2014 Chrysler 200 2.4L I4 Engine
- 2011 - 2014 Chrysler 200 3.6L V6 Engine
- 1989 - 1992 Eagle 2000GTX 2.0L I4 Engine
- 1995 - 1998 Nissan 200SX 1.6L I4 Engine
- 1984 - 1987 Nissan 200SX 1.8L I4 Engine
- 1977 - 1998 Nissan 200SX 2.0L I4 Engine
- 1982 - 1983 Nissan 200SX 2.2L I4 Engine
- 1987 - 1988 Nissan 200SX 3.0L V6 Engine
- 1975 - 1975 Volvo 240 Series 2.0L I4 Engine
- 1976 - 1985 Volvo 240 Series 2.1L I4 Engine
- 1981 - 1993 Volvo 240 Series 2.3L I4 Engine
- 1982 - 1984 Volvo 240 Series 2.4L I6 Diesel Engine
- 1989 - 1998 Nissan 240SX 2.4L I4 Engine
- 2010 - 2018 Ram 2500 5.7L V8 Engine - HEMI
- 2014 - 2019 Ram 2500 6.4L V8 Engine - HEMI
- 2010 - 2019 Ram 2500 6.7L I6 Diesel Engine - Turbocharged
- 1981 - 1981 Volvo 260 Series 2.1L I4 Engine See All Vehicle Fits
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Arrived Damaged
Customer Reviews
Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient - D13503
Average Customer Rating: 4.7 out of 5 stars (814 Customer Reviews)
11" Wide x 8-3/4" tall x 7/8" deep, efficient heat exchanger will prolong the life of your transmission and improve its overall performance. Specifically designed for vehicles with late-model, electronic overdrive transmissions.by: Jay03/16/2024
Works fine and wasn't difficult to install. I didn't take the bumper cover off. Worked from top and below.
Fashioned an aluminum brace.
by: Jesse04/16/2024
I did not test my transmission temps before installing this cooler, so it's very possible that it is helping -- just not enough. 4Runners are not great towing vehicles to begin with, so it's probably not this product's fault. It's fine on flats and gentle inclines, but on long steep inclines I still find myself hitting 260 degrees towing a ~3,000 lb teardrop. If you're towing with a 5th gen 4runner I would look into something bigger or one of the options with a fan.
by: John G08/30/2013
2010 Jeep Liberty
Thanks for shipping so fast. the response time was impressive!
Below is a picture of the install of my Derale trans cooler (13503) installed in my 2010 Jeep Liberty.
I did not install with the inlet/outlet on the bottom due to thinking that with a plate and fin type cooler air might get trapped in other end. I mounted it horizontal and put the inlet flow on the bottom to assure that any air gets purged. Odd thing about this trans is that there is a bypass valve on the lines that is thermally operated. The flow to the coolers is bypassed until a specific oil temp is reached. Then flow is allowed to go to the cooler(s). This is done because the trans cooler is completely independent of the radiator. There is no thermal exchange between the trans fluid and the engine coolant. With the transmission fluid bypass valve in operation it is not possible to reduce trans temp below a preset level (or nearer ambient temp) because the thermostat valve simply turns off flow to the cooler(s).
In a conventional setup the coolant flows all the time and there is no by-pass. Trans fluid is kept from dropping in temp by the engine coolant which will actually put heat into the trans coolant if the engine coolant is warmer. Chrysler has no thermal exchange with the engine coolant so they thermostatically control flow to keep the trans from operation at a too low temp.
In short, in my vehicle I can’t reduce the trans temp below the thermostat setting, But I can assure that the temp of the trans can never be too hot.
I also mounted the trans cooler on brackets I made. I was uncomfortable pushing the rods thru the radiator and the air conditioning and factory trans cooler. The added mass of the Derale trans cooler may have been a little too much clamped onto the radiator. I tapped into the original hose with a 3/8 double barb fitting and double clamped all connections.
Also below is a exploded parts view showing the by pass valve on the trans lines which directs trans fluid back to the trans and by passes the cooler(s) until the trans gets to a specific temp. It is item #3.
Don W.
10/25/2014
Nice discussion John, thx. Did you have over heating problems prior to cooler install. I have a 2011 Liberty that overheats any time I use it off road on hills in the summer....the Jeep dealer told me that they all do this...I wonder if its actually the bypass thermostat?
John G.
10/28/2014
Hi Don, My Jeep has never overheated either engine or trans. I have never heard of them being prone to overheating either. If you suspect the inline thermostat on the coolant line I think that would be easy to check simply by feeling the lines and seeing if the line is returning hot trans fluid without going up front to shed some heat. I added the cooler because I put a trailer hitch on and just wanted to make sure that the trans would stay in the proper operating temp range. Are there a lot of bugsdebris in the trans or engine radiators? Is the thermostat cycling properly? Any pinched hoses? If the engine coolant is too hot it may be a pinched hose. Check the temp of the inlet hose versus outlet hose while the engine is running. If the return line is at the same temp as the outlet hose the radiator is not shedding the heat adequately. Cooling problems can be a little tricky but a little detective work can usually solve it.
by: Rahul05/08/2023
2007 Nissan Xterra
Very cool product! I can't seem to 'feel' the difference while driving, but when engine cold, the transmission shifts harder.....probably proof that the transmission fluid is not warming up as much
Rahul
5/9/2024
Perfect! Keeps my Transmission cooler
by: Lee12/03/2022
2007 Chevrolet Avalanche
Part seems to be okay. The hose is to short. Now I have to wait a few days to receive more hose to finish installation. etrailer should add more hose than the length that comes with it. On many applications this cannot be intalled effectively with the amount of hose in the kit. This is even mentioned in the video that etrailer provide.
Lee
12/4/2023
Still holding up. No issues.
by: Esteban 10/02/2023
2010 Chevrolet Suburban
My teenage son and I installed this on our 2010 Suburban in about 2hrs. This was to supplement the tiny, stock external cooler. The video was very helpful. We did not have to cut the plastic as in the video. There was enough room for the hoses and fittings with no kinks. The transmission was running hot, 190-200 degrees with no trailer and up to 220 degrees with a trailer on level ground. The transmission never got above 155 degrees, with no trailer, after this cooler. I can't wait to tow now. I am confident the temps will stay at or below 200. This is just what I needed for my lifted Suburban and travel trailer.
by: Kevin07/10/2023
This does not fit a 16 Pilot Touring. The only option is the OEM trans cooler (500.00).
Jenny N.
7/17/2023
I know that installing transmission coolers can be difficult. I wanted to ask how yours was not a fit on the 2016 Honda Pilot Touring? I also wanted to confirm that your engine size and what speed transmission that you have?
Kevin
8/10/2023
Because I have the touring model with the 9 speed transmission.
Jenny N.
8/10/2023
I do see now what happened. The transmission coolers that we carry are meant to work with the 6 speed versus the 9 speed transmission.
by: Pete11/29/2018
2003 Toyota Tacoma
Transmission cooler installed on 2003 Tacoma RWD.
The Transmission Cooler was easy to install. No problems whatsoever.
I chose to mount it behind & left of the license plate.
Pete W.
11/30/2019
I like the peace of mind it gives me. Even though I only pull a small utility trailer. I expect it will add to the transmission longevity
by: John 04/25/2024
First very easy to install. So for the quality is outstanding no wear or corrosion. Highly recommended
by: Brian11/10/2018
2007 Chrysler 300
This cooler is working perfectly. It gives me piece of mind when I'm towing my old travel trailer. I didn't use the plastic ties that come with the product but instead mounted it with aluminum frame material from the hardware store. I was disappointed that the kit did not come with the adapter I needed to install it onto the transmission fluid lines on my Chrysler 300. I had to obtain the fitting from a salvage yard. The instructions were helpful.
by: Courtney07/08/2018
1995 Chevrolet Silverado
I always enjoy my experience buying from etrailer. Troy my sales associate was very knowledgeable about the product and ensured I had all the parts i needed to complete my install. On most online sales transaction the sales associate is done when the order is placed, not so at etrailer, troy followed up with me to ensure i got all the products i bought.
Installation was easy as etrailer has very good videos, makes me look like a pro, in my case I utilized the video on the chevy suburban to provide the basics for my silverado installation. The difference between the two is the silverado front grill snaps out and i did not have to drop the entire front cap. ALso had to fashion a mount for the cooler to support it to the A post. I just used two bolts and locknuts together with the two pieces of the bendable metal mounts (D13002). see photo.
I took my trailer out this past weekend to test out the cooler. My transmission runs at least 20 degrees cooler while towing my 8000lb 5th wheel trailer. Max temps were at 160 deg. with air temps at 91 degrees, and high humidity in florida, typically this would be in the low 180’s rolling at 60 mph. transmission felt smoother while changing. I have a performance tune on my truck. Accelerating off the on ramps did make the transmission temp rise above 160 to around 165 then it fell back to around the 160 mark. It started raining heavily and the outside temps dropped to the 80’s and the transmission temp dropped to the 140’s.
Normal driving around town with no hitched load in stop and go traffic with outside temps hovering around 95 with high humidity (feeling more like 103). here in tallahasse my transmission runs at around 140. I just checked my owners manual and my transmission oil and filter is past due for changing. i will get that done and see if anything changes. all in all this product works for me.
Thanks etrailer!!!
by: Ian G.03/04/2017
2010 Honda Odyssey
The D13503 transmission cooler was a fairly straightforward DIY installation on a 2010 (3rd gen) Honda Odyssey. Watch a video or two on etrailer.com and you should be able to figure everything out. Two issues came up. First, it is not trivial to get the hose pushed securely onto the nipples of the cooler or the vehicle. Readers should thoroughly lube the inside of the hose and the outside of the nipple. (I suppose a tight fit is good, just be prepared to apply force and be patient!) Second -- and this is why the product only gets 4 stars from me -- the head of one of the plastic mounting rods broke off. No extras are supplied, so I figured out a zip-tie solution. It leaves me nervous about the strength of the remaining three, but the installation seems secure for now.
Potential DIYers should also note that you are likely to break some of the body panel retainers (aka "clips") during disassembly of your vehicle's front end. (Not surprising on my 95,000 mile van; they were brittle.) Be prepared and locate a source for replacements ahead of time.
Overall, this product seems well-designed, is offered at a great price from etrailer, and has the potential to lengthen the life of your transmission even when not towing.
by: David11/07/2021
2014 Nissan Pathfinder
The cooler is well built and the included hardware are high quality. I installed it on a 2014 Nissan Pathfinder with CVT. I have the factory external cooler but in a Texas summer, it just wasn't enough. I added this cooler in line. My reasoning: the factory cooler has a thermostat bypass valve (the little metal box the transmission lines go into), so to allow the heater and bypass valve to work without constantly cycling. here is how I connected everything. Hot fluid comes from the transmission to the factory cooler via the top hose. It then goes through the factory cooler or bypasses via the valve depending on fluid temp. It comes out the bottom line which I ran to the top nozzle on the Derale cooler. You can see where I drilled 2 3/4" holes in the plastic for the lines to go through. The bottom line goes to the return line on the radiator, and cool fluid returns to the transmission (The factory hose is just long enough to reach the new cooler where I positioned and mounted the new cooler, otherwise I would have had to buy extra hose). The mounting straps that come with the new cooler are plenty strong, judging by how much I had to fight the hoses. Also, I mounted the new cooler to the air conditioner condenser, the condenser is held on with 2 bolts, and unbolting you can get just enough clearance to reach behind it to tighten the straps. So the straps don't go all the way through to the radiator, so I didn't have to remove the electric fan. The hoses are loosely zip tied to each other, so they don't touch the air dryer. Some people say it doesn't matter how you position the external radiators but this is false. Radiators are design to take in the warmer fluid on the top and the fluid cools as it goes down (heat rises, cold falls). This allows for better circulation on systems that don't have an active fluid pump. This is also the most efficient configuration and since the transmission breather sits on the top size of the engine, it also reduces the chance of air sitting in the system. I didn't find any good installation videos or reviews that really explained how they installed their cooler. So I hope, along with my photos, this helps some of you.
by: Jose09/22/2019
Finally finished the installation. The adapter didn't work for my application. I found an etrailer video that used Derale Snap-In Radiator Adapter Fitting for GM
Item # D13035. Ordered the adapter for my 2007 Jeep Compass. That did the trick. The mounting steps with the kit were ok but I only managed to put in 3 of the 4. However the oil cooler is secure and won't budge. I'll update if needed but the install was a success.
by: Jarod03/30/2020
2016 Honda Odyssey
I installed this on a 2017 Honda pilot. I didn't like the mount option shown in the video that covers 3/4 of the cooler by direct mounting to the back of the bumper beam. I used two M6 x 1 x 20mm, one M6 x 1 x 30mm bolts, one M6 x 1 lock nut, two washers, one 1/2" nylon spacer, one 10" piece of zinc plated steel, and multiple zip ties to fabricate a mount using the existing mounting locations in front of the radiator. I also notched one corner of the mounting flange to allow it to clear a portion of the air dam. With this mounting location, nearly all of the cooler is exposed to clean air at the front.
by: Ben. B06/30/2016
2004 Honda Odyssey
Installed the transmission cooler before our 15 hour trip to Florida from Kentucky. Previously had overheating problems with the transmission on long trips. The transmission never overheated during our latest trip with this new transmission cooler installed. Cooler came with everything available, with the exception of tools, to complete the installation. I will install another one if we upgrade to a later model Honda.
by: Randall11/01/2017
2006 Jeep Grand Cherokee
Decent kit overall. I have 2 issues... #1 Installation video and instructions glaze over the fact that in most vehicles there is only about 1/2 inch of room in between A.C. condensor (even after loosening bolts) and radiator making it extremely difficult to install using the included push rods. It took me forever and was a complete pain. #2 for my vehicle a 2006 Jeep grand cherokee, I apparently needed a special "GM" adapter even though my vehicle is not made by General Motors and nothing said I needed this special adapter until I took everything apart and found out whateber insta-adapt came with the kit was not going to work. I had to wait several days until I received the adapter to complete the install, again frusterating and not communicated to the buyer.
by: DJ09/24/2013
2005 Nissan Pathfinder
Installed this in a 2005 Nissan Pathfinder. Fit is excellent. I wanted to remove the factory radiator connection as this is a common point of failure allowing coolent to enter the ATF. This is plumbed from the transmission to the factory cooler, then to this new cooler, then back to the transmission. The only thing extra I had to buy was a 3/8 double barb to connect to an existing hose. This cooler adds about half a quart of ATF to the system. I can't speak for any temp drops as I don't have a temp gauge installed yet.
by: Steven H.01/17/2012
2002 Honda Odyssey
This cooler was easy to install. I did not use the insta-dapter fitting that comes with the cooler. I used a 5/16 barbed coupler instead. One thing I should note is: the instructions state, "warm the vehicle and locate the cooler line and that one will be the return". In my case the radiator made the return line hotter after warming the vehicle for several minutes. I had factory Honda cooler instructions available at install. So return line location was a no brainer. Derale instructions had me second guessing my connections after install was compete. It's installed on a 2002 Honda Odyssey with a newly installed transmission at 70K. I had to remove the headlamp assembly in order to tip the condenser coil far enough to get my hand behind it.
by: Robert05/21/2020
2015 GMC Canyon
Installed in a 2015 GMC canyon. Seems to work fine will update when I get some towing miles logged. Used the D13035 adapter and the D13002 universal mount kit so I did NOT have to zip-tie to the condenser. Slight mod to snip off the tip to create an angle on the derale bracket then mounted it to the support bar upfront and screwed bottom into the radiator support
by: Jediah05/08/2024
Great product! Seems to be working very well.
by: Mark06/23/2022
It has been a year since I installed the 8000 series transmission cooler. It has lowered my transmission temperature 30 plus degrees. The install was easy.
by: Homero G.02/28/2015
2003 Chevrolet Avalanche
Excellent quality and build. I installed this in a 2003 Chevrolet Avalanche. I wanted a factory look installation so I mounted the bottom of the cooler in the factory bracket located mid way and made a bracket to mount the top of the cooler. I mounted it with the hoses downward so they will not be visible from the outside of the car. See pics for details on the brackets and mounting.
by: Robert06/21/2018
This transmission cooler fit perfectly behind my grill. I mounted it on brackets in lieu of a direct mount on the radiator. I’m glad you recommended the GM adaptor hose fitting as my application would not work with the Insta-Dapt which was not compatible.
Works great towing my 4,000# trailer in this Florida heat.
by: Lee04/08/2024
2011 Chevrolet Silverado
works great doing the job it is designed for
25
812
Show More Reviews
See what our Experts say about this Derale Transmission Coolers
- Recommended Transmission Cooler for 2015 Toyota RAV4For your 2015 Toyota RAV4, I recommend looking at the Derale Transmission Cooler # D13503. This is an excellent and efficient plate-fin cooler that will help to prolong the life of your vehicle's transmission. The unit measures 11 inches wide, 8-3/4 inches tall and 7/8 inch deep. As long as you have the necessary space between your RAV4 grille and AC condenser to mount this cooler, this unit will work great. I have attached a short video demonstration on this product along with the written...
view full answer... - Can a Supplemental Transmission Cooler be Used on a Truck with a Larger Aftermarket Pan CoolerYou can use any transmission cooler that will fit in the available space that you have in the engine compartment of your truck. They are not vehicle or transmission specific like the pan cooler that you have. The most popular transmission cooler we offer is # D13503. It measures 11 inches wide and 8-3/4 inches tall with a depth of 7/8 inches. The optimum transmission fluid temperature is 160 to 200 degrees. Transmission fluid cannot be over cooled so adding an additional cooler will not...
view full answer... - Recommended Transmission Cooler for 2003 Jeep Liberty with 3.7L V6 Engine Since aftermarket transmission coolers are not vehicle-specific, you can install as large a secondary cooler as you have space to mount one. The ideal installation point is in front of the A/C condenser where the cooler will receive maximum air flow, and hence be able to deliver maximum cooling efficiency. For the 3.7L V6-equipped 2003 Jeep Liberty you can use Derale transmission cooler # D13503 or one of the other units shown on the linked page. I linked an installation video for this...
view full answer... - Does Derale Transmission Cooler Install in 2017 Ford F-150 Without ModificationThe Derale Series 8000 Plate-Fin Transmission Cooler # D13503 will install in your 2017 Ford F-150 with a 3.5L engine and not require any modification of your transmission lines. You will also not need any adapter fittings for your truck. I have added a link to the installation instructions as well as a video review for you to check out of the Derale Series 8000 Plate-Fin Transmission Cooler # D13503.
view full answer... - Trasmission Cooler for 2013 Dodge Jorney With 3.6L V6 EngineWith your fluid temperatures getting that high I absolutely recommend adding a supplemental transmission cooler to your 2013 Dodge Journey with a 3.6L V6 engine, the Derale Series 8000 Plate-Fin Transmission Cooler # D13503. This is a plate-and-fin cooler, which means it uses smaller plates that cover more area than other coolers in order to agitate transmission fluid. Because you cannot over-cool fluids, the rule of thumb with transmission coolers is that size matters so the large 11"...
view full answer... - Transmission Cooler Recommendation for a 1990 Chevy G30 Motor Home with a 5.7 Liter V8Good news, transmission coolers are not vehicle specific so you will be able to use one on your 1990 Chevy motor home. The cooler you have referenced, the Derale 8000 Plate-Fin Cooler, # D13503, is listed as a recommended cooler for the 5.7 liter Chevy motors for the 1990 model year. I have included some links to FAQ articles and a video for you that explains installation.
view full answer... - Transmission Cooler for a 2011 Nissan Rogue with a Factory External CoolerI did some checking and there was only 1 transmission option, a CVT, for the 2008 to 2013 Nissan Rogue which means that what is shown in the video, linked for reference, is accurate. There were some changes made in 2012, the addition of a Sport mode to the CVT, but whether or not that included an alternate cooler I can't say. The bottom line is that the path of the fluid will come from the transmission, to the factory cooler (wherever it is located), then to the supplemental cooler such...
view full answer... - Transmission Cooler Recommendation for 1990 Chevy C/K Series PickupIt sounds like you're speaking of the Derale # D13501 which measures 11 x 5-3/4 inches and the Derale # D13503. A larger cooler will offer more surface area for the heat exchange, so when it comes to transmission coolers bigger is typically better. Unless you live in a climate that's consistently below freezing for much of the year, saying that you can't overcool a transmission is a pretty safe statement. The most efficient spot to mount a cooler is directly behind the grille in front...
view full answer... - Is an Aftermarket Transmission Cooler Recommended for a 2009 Honda Ridgeline with Tow PackageVehicles come with some type of transmission cooler from the factory. The tow package on your 2009 Honda Ridgeline may include an upgraded version of the factory transmission cooler. Whether or not an aftermarket transmission cooler is needed depends largely on how much weight you will be towing and how often you plan to tow. Transmission fluid can not be overcooled but in the winter it will need longer to warm up if you add an aftermarket cooler that works in line with your current system. If...
view full answer... - Recommended Brake Controller and 7-Way Wiring for 2016 Ford Explorer LimitedYou are correct that the 2016 Ford Explorer with 3.65 final drive only has a 2000 lb towing capacity. Adding the other wiring connector and brake controller and even a transmission cooler won't increase that capacity. If you want to add a brake controller, I recommend the Tekonsha Prodigy P3 # 90195 which comes with preset options, a nice LCD screen that eliminates the code deciphering, and is our best seller due to its features and reliability. For your wiring, there will not be a...
view full answer... - Transmission Cooler Recommendation for 2019 Toyota TundraA transmission cooler would a great choice for your 2019 Toyota Tundra towing a boat trailer to prolong the life of the transmission. For that the Derale part # D13503 would be a great option as it's a larger cooler that's a very efficient style.
view full answer... - Transmission Cooler For A 2010 Dodge Ram Pickup The Derale Series 8000 Plate-Fin Transmission Cooler # D13503 will work for your 2010 Dodge Ram Pickup. This cooler has a furnace-brazed aluminum construction and has 3/4 inch wide turbulator plate that provide a more efficient cooling. It will prolong the life of your transmission and is specifically designed for the Dodge Ram Pickups with late-model, electronic overdrive transmissions. I attached a review video link below.
view full answer... - Is Transmission Cooler Needed for 2011 Ford Escape with 2.5 literWe have great transmission coolers for your 2011 Ford Escape with a 2.5 liter like the Derale part # D13503 but if you are wanting a cooler for flat towing the vehicle this is not needed at all as heat is not created when a vehicle is being flat towed. A cooler will preserve the life of the transmission in normal use though.
view full answer... - Recommended Transmission Fluid and Engine Oil Cooler for a 2005 Dodge Grand CaravanThe Derale Series 8000 Plate-Fin Transmission Cooler part # D13503 is 11" wide x 8-3/4" tall x 7/8" deep and the Derale Series 8000 Plate-Fin Transmission Cooler part # D13502 is 11" wide x 7-1/4" tall x 7/8" deep. As you mentioned the only difference between the two are their size. The larger cooler will provide more cooling power for your vehicle's transmission. Neither of them would cause any damage to the vehicle if installed correctly. If you are looking for both a transmission fluid...
view full answer... - Recommended Transmission And Oil Cooler For 2015 Toyota TacomaThe Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient # D13503 is a great choice for your 2015 Toyota Tacoma 4x4 with 4.0L V6 and the plate-fin is a good way to go. The internal turbulator agitate the fluid to facilitate heat transfer and prevent any undesirable drop in pressure. For your engine oil cooler, I recommend the Derale Plate-Fin Engine Oil Cooler Kit w/ Adjustable Sandwich Adapter (Multiple Threads) - Class V # D15405. This is the complete...
view full answer... - Transmission Cooler Recommendation for a 2008 GMC Sierra 1500 with 5.3 LiterTransmission coolers are not vehicle specific so you can use any one that fits in the available space under the hood of your 2008 GMC Sierra. The most popular cooler for your truck is # D13503. But you can use # D13612 is you want. It will not provide as much cooling as # D13503. To avoid having to cut and flare lines I also recommend using fitting # D13035. The factory lines from the transmission to the radiator are likely lower on the radiator but following the lines from the transmission...
view full answer... - Can a 2011 Honda Odyssey Tow a 3200 Pound Travel Trailer Using Weight Distribution and ATF CoolerEqual-i-zer is a brand that makes weight distriubution systems. But just like with Kleenex and tissue, people use the term equalizer to mean any weight distribution hitch. The actual Equal-i-zer systems do have built in sway control so I would assume that is what he has. I checked the owners manual online for the 2011 Honda Odyssey and found the following information. With 2 passengers and using a transmission cooler the vehicle has a 3,500 pound gross trailer weight capacity. With 3...
view full answer... - Parts Needed to Increase Towing Performance on a 2013 Ford ExplorerThere are a few things that you can do to help out your 2013 Ford Explorer for when you are towing. You can add an air intake system, a tuner, and also an aftermarket transmission cooler to get the most out of your Explorer. I do recommend getting your check engine light taken care of though as that is something you don't want on, especially when towing. The best intake system that we have is the Airaid MXP Cold Air Intake System # AR400-260 which feature an oiled filter for superior engine...
view full answer... - Parts Needed To Tow With a 2008 Subaru Tribeca HitchIn order to tow the 1976 Starcraft Starmaster 6 Pop Up Camper with your 2008 Subaru Tribeca you will need a trailer hitch, trailer wiring harness, and ball mount/hitch ball. These will be the only requirements to tow the trailer but you may also be interested in a transmission cooler to help prolong the life of your vehicle's transmission. For a trailer hitch, I recommend the Curt Trailer Hitch Receiver part # C13046. This hitch is a custom fit so no drilling is required and it is super...
view full answer...
- Parts Needed To Tow with a 2017 GMC Savana 2500 VanIf the trailer you will be towing with your 2017 GMC Savana 2500 Van has brakes then yes, you will need to use a 7-way wiring harness and brake controller in addition to the trailer hitch, trailer wiring harness, and ball mount/hitch ball. These will be the only requirements to tow the trailer but you may also be interested in a transmission cooler to help prolong the life of your vehicle's transmission. For a trailer hitch, I recommend the etrailer.com Trailer Hitch Receiver part # E98861....
view full answer...
- Trailer Hitch, Wiring, Brake Controller, Helper Springs and Accessories for 2007 Toyota HighlanderFirst, consult the vehicle owners manual to make sure your 2007 Toyota Highlander trailer weight capacity is high enough to tow the trailer. The trailer hitches for your Highlander are not rated for use with weight distribution so you will not need a weight distribution system. For a trailer hitch the most popular option is Curt hitch # 13530. It is a Class III hitch rated for 3,500 pounds gross trailer weight. I have linked a video showing installation for you. Since you plan on doing...
view full answer... - Special Fitting Needed to Install Supplemental Transmission Cooler on a 2011 Lincoln NavigatorYou are correct. Fitting # D13025 threads into the radiator on your 2011 Lincoln Navigator so you will not have to cut or flare the metal lines to install a supplemental cooler. A cooler such as # D13503 includes the hose, clamps, and hardware to mount it so the fitting # D13025 is the only other part you'd need. They are the appropriate size to match the lines to/from the transmission. The fluid will flow from the transmission, into the stock cooler located inside the radiator, then...
view full answer... - Recommended Transmission Cooler For Chevy Silverado 1500 With 4.8L Engine And Tow PackageThe regular transmission temperature on your 2012 Chevy Silverado seems a little high and it is a concern it jumps that much with such a light trailer load without an extreme grade. I recommend you install a transmission cooler to bring this temp down for towing. The best transmission cooler for you is the Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient # D13503. This cooler has furnace-brazed aluminum construction and 3/4 inch wide turbulator...
view full answer... - Should a Transmission Cooler be Added on a 2004 Honda Odyssey Towing a 2,300 lb Boat and TrailerTowing a boat 16 miles twice a year should not require the use of a transmission cooler in most situations. Keep in mind though that if Honda requires an added transmission cooler for towing, see owners manual, you may have warranty claim trouble if a problem occurs with the vehicle. It is my experience that when a person installs a hitch, like the Draw-Tite Class III Hitch, # 75270, which fits the 2004 Honda Odyssey, they find more and more reasons to tow. In this situation I would recommend...
view full answer...
Do you have a question about this Transmission Cooler?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Alan C
Test Fit:
Randy B
Test Fit:
Brent H
Test Fit:
David F
Test Fit:
Ryan G
Test Fit:
Bradley B
Expert Research:
Jackie C
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Brandon M
Expert Research:
Adam R
Expert Research:
Jeffrey L
Expert Research:
Victoria B
Video by:
Andrew K
Video by:
Kathleen M
Video by:
Zach D
Updated by:
DeAnne T
Updated by:
Daron K
Updated by:
Jenny M
Updated by:
Hannah L
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Mike H
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
John S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
John G.
9/2/2014
still working great!