etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
(1003 reviews)
Price: $153.11
In Stock
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
Item # e98846
Retail:$258.63
Our Price: $153.11
You Save: $105.52
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (1003)
- Q & A (0)
- Photos
etrailer Trailer Hitch - e98846
- Class III
- 2 Inch Hitch
- 3500 lbs GTW
- Concealed Cross Tube
- etrailer
- 525 lbs TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer
- Matte black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Made in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 3,500 lbs
- Maximum tongue weight: 525 lbs
- Not rated for use with weight distribution systems
- Limited lifetime warranty
Rugged, Matte Black Finish
The sturdy steel construction is protected with a matte black finish for added durability. This unique powder coating gives etrailer hitches a carbide-like appearance and a rugged look that sets them apart from traditional glossy hitches. In addition to being rust and corrosion resistant, the tough matte coating hides dirt, scuffs, and dings better than a glossy finish.
etrailer Technical Support
At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
e98846 etrailer Class 3 Trailer Hitch Receiver - 2" - Matte Black Carbide
Installation Details
This Product Fits The Following Vehicles
- 2008 - 2020 Nissan Rogue
- 2010 - 2011 Nissan Rogue excluding Krom
- 2014 - 2015 Nissan Rogue Select
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Arrived Damaged
Customer Reviews
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" - e98846
Average Customer Rating: 4.8 out of 5 stars (1003 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.by: JR10/05/2022
Installed on 2018 Rogue. Easy install. Works well for my intended purposes. I use it for storage and transportation racks. It is a little off center, but I don't use it for towing.
by: Golan04/13/2023
2016 Nissan Rogue
The parts look great and fits the car perfectly. Had a test drive with a 2 bicycle rack mounted and it was perfect. The package was damaged in some areas upon delivery and some color damage was showing at 2 spots (minor). The installation video was very helpful and made the installation an easy job
Golan
4/14/2024
Working flawlessly for the past year!
Bud M.
5/13/2024
@Golan
Great to hear. Thank you for the update.
by: 06/28/2023
Quality product that appears to be well-made.
Shipping container could have been more sturdy (it busted through the box in three places).
Install instructions were simple but helpful (socket sizes to remove the tow hook bolts and install the tow hitch, extension, how to remove the plastic retainers).
Install was very easy and I didn't need to unhook the exhaust as suggested by the instructions. Only a small amount of trimming was necessary for the rock guard to fit around the hitch.
by: Ed K03/25/2024
My overall assessment of the product is that it meets the basic requirements, but there are some notable issues with its packaging and alignment. Like others have pointed out, the packaging was insufficient considering the weight of the product, leading to concerns about its integrity during shipping. Additionally, there was an alignment issue with the third bolt hole on the driver's side, which was not mentioned in the installation videos on etrailer.com. While the website suggests bending and flexing the product to address this, I believe such modifications shouldn't be expected from customers, and it reflects poorly on etrailer's quality control.
Given these concerns, I'll primarily be using the product for lighter applications like a bike rack or cargo rack. However, I'm apprehensive about the reliability of the third bolt. If I happen to be in the vicinity of etrailer in St. Louis, I might consider visiting them to rectify the issue. Other than this, I was happy with the process and the product.
by: Yang05/09/2023
Shipping isn't the greatest. I understand that it is a 40ish pound metal, but packaging could be better. Returned the 1st one sent and got another one, but even then there was another hole in the package.
Customer service was quick to send me another one and I loved how quick it was.
Currently live in AZ so chipping in the paint doesn't matter since there isn't a big rust issue. But will be moving to WI soon and some places still use salt. Don't want rusting already.
Saw some minor paint chipped areas on the 2nd one sent. Not as bad as the first one sent.
Not sure why they used a 19mm for the new bolts. Was annoyed that the old ones was 18mm and then swapped to 19mm.
Easy installation. Forgot the name of the piece but think it was a elbow socket, so I didn't even need to waste my time taking off the exhaust.
Had some left over green spray paint so I used that to spray over the chipped areas instead of wasting $ on black paint.
Overall, not sure if I would go with etrailer again for my trailer needs. Loved how fast customer service worked to resolve my issue. Packaging needs to be better. It's a hitch receiver, a piece of metal... not much to say about it except I hope the ugly spray job prevents rust! I mean it will rust eventually, just don't want the life span of it to be less.
by: Ernest01/04/2024
The hitch was very easy to install! However, I could only get 4 of the 5 bolts to work. The fifth bolt hole (driver side closest to the front) half covered the hole in the frame.). I only bought it to haul our bicycles so this should be fine but I wouldn’t try it under full load.
by: Perry Pirillo02/28/2024
Fairly easy to install, even for a 64 year, like me. Just had a little trouble with the bolt holes being rusty on drivers' side and passenger side had a plate I had to remove.
by: Nate -03/21/2024
Perfect fit didn't have to remove anything on the car just 5 bolts and i was ready to go. Also best price online and exceptional quality. This is the 2nd hitch i have purchased from etrailer for different cars and will be coming back if need anymore.
by: Harshil03/28/2024
I've had this hitch on my vehicle for over a year and still holding strong. No rust at all. I highly recommend this hitch.
by: Dirk04/06/2023
If it weren’t for careless shipping (or maybe substandard packaging) I’d be much happier! There were four places where the Diana’ finish was scratched down to bare metal. This means, before I can even install it, I’m going to have to paint it so it doesn’t rust in those places. I’m stunned that there was so little packaging or protection besides the outer cardboard box and two, thin wrappings around the frame. The hitch may function great…after $7.50 in paint and an hour of my time.
by: Jimmy W05/15/2023
Product is well made, fit as described….. no adjustment need.. can be self installed…. I am very happy with this product.
Jimmy W.
5/15/2024
Perfect….. easy installation, no fit issues … would and do recommend
by: James08/11/2022
2018 Nissan Rogue
Amazingly quick delivery...a couple days. One piece so pretty simple, actually it won't go on wrong. Still tricky lining up holes and holding it in place for bolts...definitely a two man job (and one fairly strong, holding it in place). Only real challenge was removing and reinstalling the rubber/plastic covers from the vehicle. Very heavy duty, haven't towed yet but looks like the car will fail before the hitch does!
James
8/14/2023
Great! Simple but not necessarily easy to install...had to move a few things under car around, but with neighbors help, AOK.
by: Robert 01/21/2024
Fantastic quality, looks great on vehicle and have towed over 50 times, way to go etrailer, home run on design and functionality
by: Ed03/23/2020
2018 Nissan Rogue (not the Sport model). Perfect fit. Hidden well. Will order again from etrailer for my next car.
I use a longer ball mount to ensure trailer clears the bumper. For the electrical I purchased the Nissan wiring harness and cut the end off instead of going through the floor of the car (not a good idea in my opinion). Instead I used the connector portion that came from etrailer and hang it out the hatch when needed (also avoids the weather wear).
Ed
3/24/2021
Perfect. Ive used it several times pulling a 5x8 trailer. Still 5 stars!
by: Peter A.08/08/2019
2019 Nissan Rogue
Excellent product; fit my 2019 Rogue exactly as described in the very helpful video; had no problem installing the hitch which took about 30 minutes (the holes lined up perfectly and I didn't even have to jack up the car or put it on a lift); especially satisfied with the expeditious delivery which took about 4 days. I plan to use it with the Swagman XC 2-bike rack platform style that I ordered from etrailer to carry my wife's and my bikes on vacation trips.
Peter P.
8/9/2020
Works out great. Im very satisfied with both the receiver & the rack.
by: Michael 04/13/2024
The Hitch arrived well packaged and was easy to install, the quality of the part and the fit was spot on and had it in in about an hour. Thanks
by: Kenny V05/05/2021
Excuse the dark picture but I installed the hitch by myself as soon as I got home when I saw that it had been delivered. Hitch receiver is very well made and high quality. Everything aligned perfectly and it looks awesome installed. The only thing visible is the receiver tube. Absolutely cannot beat this hitch for the price. Thank you etrailer!
Kenny V.
5/6/2022
Its been a year and everything that I said previously still stands. I use my hitch every weekend and it has held up to everything.
by: Jon K08/06/2023
Nissan Rogue
This receiver was hands down the best investment into our rogue we ever made. It paid for itself by allowed us to save on moving cross country with my bike attached to our car. Shipping pricing was almost double & I was able to keep our bikes with us & secure the entire trip. Now two almost 3 years on the hitch has seen a full range of uses.
Installing from etrailers was perfectly fit to the car. The only challenge was putting bolts into the corroded threaded holes of our car. If I could have put this trailer hitch on the day we bought our car, I would have. Cleaning the holes out was as simple as a wire brush attachment to my drill & some like machine oil to clean the rusted dust out the factory holes.
I haven’t done a full weight test but I was able to pull my small mower trailer around our farm. This is by far our best investment to our little car & we’re now ordering roof rack accessories for our next vehicle.
by: Joyce05/14/2024
Arrived in ok condition, some paint was scratched or scuffed, I touched up and also the box was a mess. Installed ok and works ok.
by: Joe07/11/2019
Looks nice feels solid and installs simply. This hitch is exactly what I needed for the bike carrier I use and couldn’t be happier. Installed on my 2008 Nissan Rogue with my only troubles being the rogues frame being a little crusty making the bolts tough to screw in on the left side. Nothing brute strength and spray lube couldn’t handle though. Did not need to move the exhaust or modify anything as it fit perfectly.
Joe
7/11/2020
Fantastic. Absolutely no issues
by: Lee04/29/2022
2017 Nissan Rogue
Was very easy to install and my heavy duty bije rack fit perfectly!
Lee B.
4/30/2023
Still happy with my hitch. Works greak with my bike carrier.
by: John 08/04/2022
2012 Nissan Rogue
I was nervous about installing this thing myself because I don't have a way to lift the car up. But it's all near the rear, so I was able to get my head under and install it with the help of a friend. It's surprisingly easy, and as another review said, not necessary to remove the muffler--it's a little tight, but doable with a ratchet extension. Great product at the lowest price I found.
John
8/5/2023
To be honet, I only used it for one trip to Burning Man last year, but it performed perfectly.
by: Kenneth 01/12/2024
The hitch was easily installed on my car, works well and was a great price. Delivered promptly and as promised.
by: Michael 08/14/2023
This was my first purchase from etrailer and first of all, the website is full of good resources including installation videos. My car model had few options for bike racks so I went with the hitch. I was unsure how the installation would go but I was able to do it myself thanks to the video. The hitch looks great as it doesn't stick out at all. I'm very happy with the purchase.
25
1003
Show More Reviews
See what our Experts say about this etrailer Trailer Hitch
- Comparison of Class III Hitches Available for 2020 Nissan RogueAll three hitches are compatible with your vehicle. If the install procedure and how the hitches fit on the vehicle are compared, the etrailer # e98846, Draw-Tite # 75902 and Curt # C13204 are for the most part identical. The Curt and the Draw-Tite # 75902 feature a shiny powder coat finish while the etrailer model has a matte, non-shiny finish. Purely a matter of personal preference. The Curt and etrailer models have the same 3500 lb towing/525 lb tongue weight capacity while the Draw-Tite...
view full answer... - Fit of Saris Freedom Hitch Bike Carrier in 2019 Nissan Rogue HitchMany bikes racks including the Saris Freedom # SA4412B that you referenced are smartly designed so that they can be used in either a 1-1/4-inch hitch or a 2-inch hitch. The aftermarket hitches offered for your 2019 Nissan Rogue include both sizes. These 1-1/4-inch Class II and 2-inch Class III hitches appear on the page I linked for you. You can measure the opening on the receiver tube to confirm which size you have (see photo, please). If you do not yet have a hitch on the Rogue and you...
view full answer...
- Recommended Trailer Hitch for a 2019 Nissan Rogue and Thule Helium 3-Bike RackI recommend using a Class III hitch over a Class II because the Class III options have a 2" receiver whch tend to have higher weight ratings, are a little beefier, and they are compatible with more accessories than 1-1/4" receivers are. For your 2019 Nissan Rogue SL I recommend the etrailer Trailer Hitch # e98846 because it has a hidden crosstube and a matte black finish. This means that you'll have a great looking receiver that will match the trim on your vehicle plus the matte black...
view full answer...
- Does Hands Free Liftgate of 2020 Nissan Rogue Still Function After Hitch InstallYes, the hands free lift gate of your 2020 Nissan Rogue will work after the install of the etrailer hitch part # e98846. You'll have to kick your foot to either side of the hitch opening is all. This is the case for most vehicles that have the hands free liftgate sensor. If your plan was to do some towing the best trailer wiring option is the Tekonsha kit part # 118480 because it installs without requiring any hardwiring or splicing to the vehicle wiring and also comes with a very reliable...
view full answer... - Hitch Pin Hole Centers For Malone Runway 3 Bike Rack Hitch Carrier For a 2014 Nissan RogueThe Malone Runway Bike Rack # MPG2130 has 2 hitch pin locations to allow you to determine which will best fit your 2014 Nissan Rogue. From the first center hitch pin to upright bar is 7-3/8". The second center hitch pin to upright bar is 9-3/8" The etrailer Trailer Hitch Receiver # e98846 has a 4-1/2" hitch pin center hole to bumper measurement on your Rogue. So you will have either a 2-7/8" or 4-7/8" clearance from the bumper to the upright bar on the Malone rack. I recommend securing...
view full answer... - Carrying Kayaks On A 2026 Nissan RogueAnytime you add a roof rack or roof rack accessory to your vehicle, you reduce the weight that you can carry. The weight limit on your 2016 Nissan Rogue is 100lbs. This means the weight of your roof rack, roof rack accessories, and the items you are carrying on the roof, when totaled, cannot weigh more than 100lbs. You will not be able to carry two kayaks with a load assisted kayak carrier, just one. If you want to carry 2 kayaks you will have to get a hitch receiver installed and carry...
view full answer... - What Parts are Needed To Safely Transport 325lb Wheel Chair with 2019 Nissan Rogue SV AWDI do have a way for you to transport your 325lb wheel chair with your 2019 Nissan Rogue SV AWD, but you won't be able to use a cargo carrier because while the trailer hitch # e98846 for your vehicle has a 525lb capacity, your vehicle is only rated for 110lbs of tongue weight per Nissan. To safely transport your wheel chair you'll need to use a trailer with the following components: Wiring Harness # 118480 Ball Mount # 989900 While I know this isn't the news you wanted to hear, this is...
view full answer... - Bike Rack Recommendation for 2019 Nissan RogueWe have great bike rack solutions for your 2019 Nissan Rogue but there aren't trunk mounted solutions at this time due to the spoiler of the vehicle. Instead a hitch mounted option would be the way to go, and honestly is superior in most ways to a trunk rack anyway. For example the Hollywood Racks Trail Rider part # HR200Z is a really great overall bike rack that doesn't break the bank. It's easy to install and use and is very stable overall on the highway. You'd just need a hitch installed...
view full answer... - Highest Capacity Trailer Hitch for a 2017 Nissan RogueThe etrailer Trailer Hitch Receiver part # e98846 has the highest weight capacity available for a 2017 Nissan Rogue which is 525 lbs for tongue weight and 3,500 lbs for gross trailer weight. That said, trailer hitches are tested separately of the vehicle so just because the trailer hitch is rated this high does not mean the vehicle can handle this. The vehicle limits will be listed in the owner's manual. In regards to the rest of parts needed, I recommend the T-One Vehicle Wiring Harness...
view full answer... - Hitch Recommendation for 2011 Nissan Rogue for Carrying Electric CartSince electric carts are typically heavier a higher rated Class III hitch like the etrailer # e98846 would be your best option for a trailer hitch. We have carriers with ramps like the Flint Hill Goods # FHG77ZR which would work great as well. I attached a picture of a mobility scooter loaded on this as well.
view full answer...
- Recommended Trailer Hitch for 2018 Nissan Rogue For your 2018 Nissan Rogue I recommend the etrailer.com Class III Hitch # e98846 because it has the highest tongue weight capacity and features a unique matte black finish that provides a rugged look that won't show scratches. This Class III hitch will install on your Rogue without the need for any drilling since it uses existing holes in the vehicle's frame. Its crosstube will also be hidden behind the rear bumper so the only thing that will be visible is the 2 inch receiver, keeping...
view full answer...
- Trailer Hitch Recommendation that Fits 2015 Nissan Rogue SVThe etrailer hitch # e98846 would be a great hitch for your 2015 Nissan Rogue SV AWD. It's mostly hidden as only the hitch opening hangs below the rear bumper (also helps with ground clearance), and also has great towing capacities as well. It actually fits all models of the 2015 Rogue which is how it fits the SV models. If you need trailer wiring too the Curt kit part # C56033 would be a great option as well. It does not require any splicing of the vehicle wiring since it is a custom fit.
view full answer... - Hanging 4-Bike Rack Rack For 2014 Nissan Rogue With etrailer Trailer Hitch ReceiverWith the etrailer Trailer Hitch Receiver # e98846 installed on a 2014 Nissan Rogue in our shop we measured the hitch pin at 4-1/2" from the bumper fascia. I recommend the Thule Hitching Post Pro # TH934XTR for your Rogue. It has a hitch pin to upright bar measurement of 13-1/2". That will give you 9" of clearance to the bumper. It will carry up to 4 bikes weighing up to 35lbs each. The bikes will have 3 points of contact to secure them in place and prevent the bikes from rattling into...
view full answer... - Does Hitch Install on 2017 Nissan Rogue Allow Handsfree Liftgate to Still FunctionThe hands free liftgate sensor for your 2017 Nissan Rogue will still function with the installation of an aftermarket trailer hitch like the etrailer hitch part # e98846. However, you will need to place your foot on either side of the receiver tube opening in order to activate it. This is the case for most vehicles that have the hands free liftgate sensor. I attached an install video for this hitch for you to check out as well. For a hanging bike rack our most popular 4 bike rack is the...
view full answer... - Is there a Hitch for a 2019 Nissan Rogue Special Edition? Yes, the etrailer Trailer Hitch Receiver item # e98846 fits all models of the 2019 Nissan Rogue including the special edition. This hitch is custom fit and bolts directly to your frame with included hardware. It installs in preexisting holes and does not require any drilling or welding. I have linked an installation video and attached a picture below so you can follow along with the process and see the final product. If you need a wiring harness to control your trailer or accessories...
view full answer...
- What Is Needed To Tow a Trailer With Trailer Brakes With a 2010 Nissan RogueI was able to find the owner's manual for your 2010 Nissan Rogue and it states that if a trailer is over 1000lbs it will need to have trailer brakes. The maximum towing capacity is 1500lbs if you have manual mode, and 1000lbs if you do not. For your vehicle I recommend the etrailer Trailer Hitch Receiver # e98846 which has a tough matte black finish to match the trim of your vehicle, and resists scratches and chips. I included an installation video of the etrailer # e98846 for you to...
view full answer... - Which Trailer Hitch Receiver And Hitch Mounted Bike Rack For a 2011 Nissan RogueWe can definetly get you a trailer hitch receiver and bike rack that will work great on your 2011 Nissan Rogue. For a trailer hitch receiver I recommend the etrailer Trailer Hitch Receiver # e98846 which has a 2x2 receiver that offers the most options for accessories like bike racks, and has a tough matte black finish that will resist chipping and scratches, and will blend in nicely to the trim on your Rogue. I included a video of the etrailer # e98846 being installed on a 2011 Nissan...
view full answer... - Recommended Bike Rack for 2018 Nissan RogueWhile there are options for your 2018 Nissan Rogue, the Hollywood Racks Over-the-Top 2 Bike Carrier for Vehicles w/ Spoilers # HRF2 is not a confirmed fit. The Nissan Rogue got a facelift in 2017 that made it hard to put trunk mounted bike racks on it. The biggest fitting issue comes how the rear bumper is designed. The only relatively affordable trunk mounted option for your vehicle is the SeaSucker Hornet Vacuum Cup Mounted Bike Rack # 298-BH1302. It attaches to the rear window and can...
view full answer... - Will etrailer Trailer Hitch For 2011 Nissan Rogue Allow Bike Rack to Tilt to Open Rear HatchIt will, yes; there is a bike rack which tilts down so you can open the rear hatch of your 2011 Nissan Rogue with the etrailer hitch that fits. The hitch that fits your Rogue and the rack you need are the following part numbers: - etrailer Trailer Hitch Receiver # e98846 - Saris Bones Hitch 2 Bike Rack # SA882 I really like the Bones due to its arched arms that give you excellent overall ground clearance for your bikes. The only other thing to keep in mind is that with a hanging rack...
view full answer... - Trailer Hitch for 2018 Nissan Rogue Towing TrailerIf you were planning on towing a trailer with a golf cart in it with your 2018 Nissan Rogue a Class III hitch like the part # e98846 would be your best option as it has a higher towing capacity than the Class II options. For trailer wiring then you'd want the part # 118480 which is the easiest to install and most reliable option we offer.
view full answer... - Trailer Hitch Capacity For A Scooter Carrier On A 2018 Nissan RogueThe maximum tongue load is 110lbs on your 2018 Nissan Rogue per the owners manual. This means the scooter carrier you would use will need to weight less than that to be safely transported on the vehicle. While trailer hitches like our own etrailer.com Trailer Hitch Receiver # e98846 will fit your Nissan Rogue and has a capacity up to 525lbs, that is always limited by the vehicle manufacturer's recommendations. You will want to consider a different vehicle for this specific purpose...
view full answer... - Will Trailer Wiring Harness Fit 2017 Nissan Rogue SVYes it will! I am happy to confirm for you that your 2017 Nissan Rogue SV is absolutely compatible with the T-One Vehicle Wiring Harness # 118480. I have added a link below to a video install for you to check out as well. Additionally, if you plan on doing some towing and need a trailer hitch for your 2017 Rogue I recommend the etrailer Trailer Hitch Receiver # e98846.
view full answer... - Comparing Draw-Tite and etrailer Trailer Hitch Receivers For a 2014 Nissan RogueThe 2 main differences in the etrailer Trailer Hitch Receiver # e98846 and Draw-Tite Max-Frame Trailer Hitch Receiver # 75902 which fit your 2014 Nissan Rogue is the finish and the tongue weight capacity. While both receivers are rated for the same 3,500lb towing capacity, tongue weight on the Draw-Tite is 350lbs and the etrailer is 525lbs. The Draw-Tire receiver has a gloss black powder coat finish while the etrailer uses a matte black powder coat finish. I find the matte black matches...
view full answer... - Will etrailer Trailer Hitch Receiver e93ZR Work With Lift Gate Sensor On 2021 Nissan Rogue SL?I would be happy to help! A trailer hitch receiver like the etrailer Trailer Hitch Receiver # e93ZR will partially block the rear lift gate sensor on your 2021 Nissan Rogue SL but it will still work by placing your foot on either side of the receiver. You will want to move your foot in and out until you find the sweet spot for the sensor. I recommend going with the # e93ZR due to it having a nice matte black powder coat finish that will blend in nicely black trim on your vehicle, and...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Video by:
Joshua S
Video by:
Kathleen M
Video by:
Michael B
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Jonathan Y
Updated by:
Wilson B
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
David F
Test Fit:
Ryan G
Test Fit:
Clayton O
Written by:
Kristina F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jr
10/6/2023
Still holding strong after 1 years use.